[Sat Oct  1 08:02:09 2011] Detection parameters:
  Position = (835.4, 443.6) = 3 26 50.95 -53 37 1.5
  Extent = 2.5" x 1.7", rotation angle = 8 degrees
  Source counts = 171.9 +/- 13.5
  Background counts = 9.1
  Rate = 0.02 +/- 0.001

[Sat Oct  1 08:02:09 2011] Off-axis axis estimate = 8.25'
[Sat Oct  1 08:03:01 2011] Using EEF radius (= 3.01 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 08:03:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  1 08:03:01 2011] Initial guess for spatial extent in simple fitting = 3.01"
[Sat Oct  1 08:03:01 2011] source mask rpix=6.1, npix_max = 174, mask sum = 169, frac = 0.967
[Sat Oct  1 08:03:01 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 3.01"
[Sat Oct  1 08:03:01 2011] fullrun_ccd2_acisf00892_pi14-548_cl_pass0_src2.ximg exists
[Sat Oct  1 08:03:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00892_pi14-548_cl_pass0_src2.csv
[Sat Oct  1 08:03:01 2011] fullrun_ccd2_acisf00892_pi14-548_cl_pass0_src2_1.ximg exists
[Sat Oct  1 08:03:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00892_pi14-548_cl_pass0_src2.csv
[Sat Oct  1 08:03:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00892_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00892_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 08:03:01 2011] fullrun_ccd2_acisf00892_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sat Oct  1 08:03:01 2011] fullrun_ccd2_acisf00892_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Oct  1 08:03:01 2011] Fit fullrun_ccd2_acisf00892_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Oct  1 08:03:13 2011] Spatial fit model total counts = 183.334000, observed total counts = 181.000000
[Sat Oct  1 08:03:13 2011] Offset between fit and detection position for source 22 = 0.325706 pixels
[Sat Oct  1 08:03:13 2011] 184.222100 total counts/ 24.677100 bgd. counts: snr = 32.117086
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.325706 pixels
  Position = (835.5, 443.9) = 3 26 50.97 -53 37 1.6
  Extent = 2.4 (2.1-2.8)", rotation angle = 0
  Source counts = 159.5 +/- 13.6
  Background counts = 24.7
  Rate = 0.02 +/- 0.001
[Sat Oct  1 08:03:13 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 08:03:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 08:03:13 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 08:03:13 2011] Source does appear to be extended
[Sat Oct  1 08:03:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 08:03:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  1 08:03:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  1 08:03:35 2011] Initial guess for spatial extent in simple fitting = 2.44"
[Sat Oct  1 08:03:35 2011] source mask rpix=5.0, npix_max = 119, mask sum = 121, frac = 1.014
[Sat Oct  1 08:03:35 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 2.44"
[Sat Oct  1 08:03:36 2011] fullrun_ccd2_acisf00892_pi14-548_cl_pass1_src2.ximg exists
[Sat Oct  1 08:03:36 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf00892_pi14-548_cl_pass1_src2.csv
[Sat Oct  1 08:03:36 2011] fullrun_ccd2_acisf00892_pi14-548_cl_pass1_src2_1.ximg exists
[Sat Oct  1 08:03:36 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf00892_pi14-548_cl_pass1_src2.csv
[Sat Oct  1 08:03:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00892_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00892_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 08:03:36 2011] fullrun_ccd2_acisf00892_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sat Oct  1 08:03:36 2011] fullrun_ccd2_acisf00892_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Oct  1 08:03:36 2011] Fit fullrun_ccd2_acisf00892_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Oct  1 08:03:45 2011] Spatial fit model total counts = 174.349000, observed total counts = 174.000000
[Sat Oct  1 08:03:45 2011] Offset between fit and detection position for source 22 = 0.215731 pixels
[Sat Oct  1 08:03:45 2011] 174.667500 total counts/ 34.244500 bgd. counts: snr = 23.996220
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.215731 pixels
  Position = (835.3, 444.1) = 3 26 50.98 -53 37 1.6
  Extent = 2.2 (1.7-2.8)", rotation angle = 0
  Source counts = 140.4 +/- 13.2
  Background counts = 34.2
  Rate = 0.01 +/- 0.001
[Sat Oct  1 08:03:45 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 08:03:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 08:03:45 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 08:03:45 2011] Source does appear to be extended
[Sat Oct  1 08:03:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 08:05:57 2011] Not overwriting source region fullrun_ccd2_acisf00892_pi14-548_pass1_cl_src22_src.reg
[Sat Oct  1 08:05:57 2011] Extracting stamp from image fullrun_ccd2_acisf00892_pi14-548_cl_sm2.00.img.gz, (735, 344) - (935, 544)
[Sat Oct  1 08:05:57 2011] Writing fullrun_ccd2_acisf00892_pi14-548_pass1_cl_src22.gif
[Sat Oct  1 08:06:01 2011] ../../acisf00892/products/events/fullrun_ccd2_acisf00892_pi14-548_pass1_cl_src22_src.evt and ../../acisf00892/products/events/fullrun_ccd2_acisf00892_pi14-548_pass1_cl_src22_bgd.evt exist, delete to re-create
[Sat Oct  1 08:06:01 2011] Size of ../../acisf00892/products/events/fullrun_ccd2_acisf00892_pi14-548_pass1_cl_src22_src.evt.gz[events] = 178 counts
[Sat Oct  1 08:06:01 2011] Mean chipx,y = (650.76, 266.55)
[Sat Oct  1 08:06:01 2011] Mean tdetx,y = (3327.55, 3435.24)
[Sat Oct  1 08:06:01 2011] chipx,y range = (622.00-680.00, 237.00-294.00)
[Sat Oct  1 08:06:01 2011] Size of ../../acisf00892/products/events/fullrun_ccd2_acisf00892_pi14-548_pass1_cl_src22_bgd.evt.gz[events] = 22 counts
[Sat Oct  1 08:06:01 2011] ../../acisf00892/products/images/fullrun_ccd2_acisf00892_pi14-548_pass1_cl_src22_src.img and ../../acisf00892/products/images/fullrun_ccd2_acisf00892_pi14-548_pass1_cl_src22_bgd.img exist, delete to re-create
[Sat Oct  1 08:06:01 2011] ../../acisf00892/products/spectra/fullrun_ccd2_acisf00892_pi14-548_pass1_cl_src22_src.pi and ../../acisf00892/products/spectra/fullrun_ccd2_acisf00892_pi14-548_pass1_cl_src22_bgd.pi exist, delete to re-create
[Sat Oct  1 08:06:05 2011] ../../acisf00892/products/lightcurves/fullrun_ccd2_acisf00892_pi14-548_pass1_cl_src22_src.lc and ../../acisf00892/products/lightcurves/fullrun_ccd2_acisf00892_pi14-548_pass1_cl_src22_bgd.lc exist, delete to re-create
[Sat Oct  1 08:07:17 2011] Keeping rmf generated by specextract
[Sat Oct  1 08:07:17 2011] 172.76
[Sat Oct  1 08:08:02 2011] Updating aperture counts using extracted products
[Sat Oct  1 08:08:02 2011] Error reading totcts from fullrun_ccd2_acisf00892_pi14-548_pass1_cl_src22_src.pi.gz
[Sat Oct  1 08:08:02 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 08:08:02 2011] Using photon index=1.80, rate=0.0145, arf fullrun_ccd2_acisf00892_pi14-548_pass1_cl_src22.arf
[Sat Oct  1 08:08:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 08:08:02 2011] Updating source flux to 1.7e-13