[Wed Oct  5 20:11:36 2011] Detection parameters:
  Position = (606.0, 221.1) = 0 24 33.74 -1 57 12.1
  Extent = 0.5" x 0.5", rotation angle = 34 degrees
  Source counts = 132.5 +/- 11.6
  Background counts = 1.5
  Rate = 0.004 +/- 0.0004

[Wed Oct  5 20:11:37 2011] Off-axis axis estimate = 2.46'
[Wed Oct  5 20:12:33 2011] Using EEF radius (= 0.49 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 20:12:33 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Wed Oct  5 20:12:33 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.015
[Wed Oct  5 20:12:33 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.49"
[Wed Oct  5 20:12:33 2011] fullrun_ccd3_acisf08918_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct  5 20:12:33 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf08918_pi14-548_cl_pass0_src1.csv
[Wed Oct  5 20:12:33 2011] fullrun_ccd3_acisf08918_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct  5 20:12:33 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf08918_pi14-548_cl_pass0_src1.csv
[Wed Oct  5 20:12:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08918_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08918_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 20:12:34 2011] fullrun_ccd3_acisf08918_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct  5 20:12:34 2011] fullrun_ccd3_acisf08918_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct  5 20:12:34 2011] Fit fullrun_ccd3_acisf08918_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct  5 20:12:43 2011] Spatial fit model total counts = 135.899000, observed total counts = 136.000000
[Wed Oct  5 20:12:43 2011] Offset between fit and detection position for source 8 = 0.657759 pixels
[Wed Oct  5 20:12:43 2011] 135.390990 total counts/ 7.277990 bgd. counts: snr = 47.488393
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.657759 pixels
  Position = (606.5, 221.6) = 0 24 33.74 -1 57 12.1
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 128.1 +/- 11.6
  Background counts = 7.3
  Rate = 0.004 +/- 0.0004
[Wed Oct  5 20:12:43 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 20:12:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 20:12:43 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 20:12:43 2011] Source does appear to be extended
[Wed Oct  5 20:12:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 20:13:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 20:13:07 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Wed Oct  5 20:13:07 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.077
[Wed Oct  5 20:13:07 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.47"
[Wed Oct  5 20:13:08 2011] fullrun_ccd3_acisf08918_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct  5 20:13:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08918_pi14-548_cl_pass1_src1.csv
[Wed Oct  5 20:13:08 2011] fullrun_ccd3_acisf08918_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct  5 20:13:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08918_pi14-548_cl_pass1_src1.csv
[Wed Oct  5 20:13:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08918_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08918_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 20:13:08 2011] fullrun_ccd3_acisf08918_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct  5 20:13:08 2011] fullrun_ccd3_acisf08918_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct  5 20:13:08 2011] Fit fullrun_ccd3_acisf08918_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct  5 20:13:17 2011] Spatial fit model total counts = 136.228000, observed total counts = 136.000000
[Wed Oct  5 20:13:17 2011] Offset between fit and detection position for source 8 = 0.001333 pixels
[Wed Oct  5 20:13:17 2011] 135.756310 total counts/ 6.996310 bgd. counts: snr = 48.679538
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.001333 pixels
  Position = (606.5, 221.6) = 0 24 33.74 -1 57 12.1
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 128.8 +/- 11.7
  Background counts = 7.0
  Rate = 0.004 +/- 0.0004
[Wed Oct  5 20:13:17 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 20:13:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 20:13:17 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 20:13:17 2011] Source does appear to be extended
[Wed Oct  5 20:13:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 20:18:48 2011] Not overwriting source region fullrun_ccd3_acisf08918_pi14-548_pass1_cl_src8_src.reg
[Wed Oct  5 20:18:48 2011] Extracting stamp from image fullrun_ccd3_acisf08918_pi14-548_cl_sm2.00.img.gz, (585, 200) - (628, 243)
[Wed Oct  5 20:18:48 2011] Writing fullrun_ccd3_acisf08918_pi14-548_pass1_cl_src8.gif
[Wed Oct  5 20:18:50 2011] ../../acisf08918/products/events/fullrun_ccd3_acisf08918_pi14-548_pass1_cl_src8_src.evt and ../../acisf08918/products/events/fullrun_ccd3_acisf08918_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Wed Oct  5 20:18:50 2011] Size of ../../acisf08918/products/events/fullrun_ccd3_acisf08918_pi14-548_pass1_cl_src8_src.evt.gz[events] = 130 counts
[Wed Oct  5 20:18:50 2011] Mean chipx,y = (663.81, 958.28)
[Wed Oct  5 20:18:50 2011] Mean tdetx,y = (4173.72, 3724.81)
[Wed Oct  5 20:18:50 2011] chipx,y range = (647.00-678.00, 940.00-975.00)
[Wed Oct  5 20:18:50 2011] Size of ../../acisf08918/products/events/fullrun_ccd3_acisf08918_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 10 counts
[Wed Oct  5 20:18:50 2011] ../../acisf08918/products/images/fullrun_ccd3_acisf08918_pi14-548_pass1_cl_src8_src.img and ../../acisf08918/products/images/fullrun_ccd3_acisf08918_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Wed Oct  5 20:18:50 2011] ../../acisf08918/products/spectra/fullrun_ccd3_acisf08918_pi14-548_pass1_cl_src8_src.pi and ../../acisf08918/products/spectra/fullrun_ccd3_acisf08918_pi14-548_pass1_cl_src8_bgd.pi exist, delete to re-create
[Wed Oct  5 20:18:56 2011] ../../acisf08918/products/lightcurves/fullrun_ccd3_acisf08918_pi14-548_pass1_cl_src8_src.lc and ../../acisf08918/products/lightcurves/fullrun_ccd3_acisf08918_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Wed Oct  5 20:21:10 2011] Keeping rmf generated by specextract
[Wed Oct  5 20:21:10 2011] 171.711
[Wed Oct  5 20:21:37 2011] Updating aperture counts using extracted products
[Wed Oct  5 20:21:37 2011] Error reading totcts from fullrun_ccd3_acisf08918_pi14-548_pass1_cl_src8_src.pi.gz
[Wed Oct  5 20:21:37 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 20:21:37 2011] Using photon index=1.80, rate=0.00432, arf fullrun_ccd3_acisf08918_pi14-548_pass1_cl_src8.arf
[Wed Oct  5 20:21:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 20:21:37 2011] Updating source flux to 5.8e-14
[Wed Oct  5 20:21:56 2011] Reading fit data from acisf08918/analysis//spectral/fullrun_ccd3_acisf08918_pi14-548_pass1_cl_src8_pl.csv
[Wed Oct  5 20:21:56 2011] Spectral fit parameter nH value = 4.48324e+17
[Wed Oct  5 20:21:56 2011] Spectral fit parameter PhoIndex value = 1.9006
[Wed Oct  5 20:21:56 2011] Failed to get F(0.3-8.0) from acisf08918/analysis//spectral/fullrun_ccd3_acisf08918_pi14-548_pass1_cl_src8_pl.csv, possibly due to different flux energy range selected
[Wed Oct  5 20:21:56 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 20:21:56 2011] Using Nh = 4.5e+17, photon index=1.90, rate=0.00432, arf fullrun_ccd3_acisf08918_pi14-548_pass1_cl_src8.arf
[Wed Oct  5 20:21:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 20:21:56 2011] Updating source flux to 5.9e-14