[Wed Oct  5 20:11:35 2011] Detection parameters:
  Position = (1033.4, 401.1) = 0 24 34.88 -2 3 22.0
  Extent = 1.3" x 0.8", rotation angle = 108 degrees
  Source counts = 113.3 +/- 10.8
  Background counts = 3.7
  Rate = 0.004 +/- 0.0004

[Wed Oct  5 20:11:35 2011] Off-axis axis estimate = 5.19'
[Wed Oct  5 20:12:32 2011] Using EEF radius (= 1.26 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 20:12:32 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 20:12:32 2011] Initial guess for spatial extent in simple fitting = 1.26"
[Wed Oct  5 20:12:32 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.963
[Wed Oct  5 20:12:32 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.26"
[Wed Oct  5 20:12:33 2011] fullrun_ccd2_acisf08918_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct  5 20:12:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08918_pi14-548_cl_pass0_src1.csv
[Wed Oct  5 20:12:33 2011] fullrun_ccd2_acisf08918_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct  5 20:12:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08918_pi14-548_cl_pass0_src1.csv
[Wed Oct  5 20:12:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08918_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08918_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 20:12:33 2011] fullrun_ccd2_acisf08918_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct  5 20:12:33 2011] fullrun_ccd2_acisf08918_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct  5 20:12:33 2011] Fit fullrun_ccd2_acisf08918_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct  5 20:12:41 2011] Spatial fit model total counts = 117.324000, observed total counts = 117.000000
[Wed Oct  5 20:12:41 2011] Offset between fit and detection position for source 34 = 0.740093 pixels
[Wed Oct  5 20:12:41 2011] 117.734820 total counts/ 7.224820 bgd. counts: snr = 41.113842
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.740093 pixels
  Position = (1033.9, 401.6) = 0 24 34.88 -2 3 22.0
  Extent = 1.4 (1.1-1.6)", rotation angle = 0
  Source counts = 110.5 +/- 10.9
  Background counts = 7.2
  Rate = 0.004 +/- 0.0004
[Wed Oct  5 20:12:41 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 20:12:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 20:12:41 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 20:12:41 2011] Source does appear to be extended
[Wed Oct  5 20:12:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 20:13:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 20:13:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 20:13:06 2011] Initial guess for spatial extent in simple fitting = 1.36"
[Wed Oct  5 20:13:06 2011] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.986
[Wed Oct  5 20:13:06 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.36"
[Wed Oct  5 20:13:07 2011] fullrun_ccd2_acisf08918_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct  5 20:13:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08918_pi14-548_cl_pass1_src1.csv
[Wed Oct  5 20:13:07 2011] fullrun_ccd2_acisf08918_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct  5 20:13:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08918_pi14-548_cl_pass1_src1.csv
[Wed Oct  5 20:13:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08918_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08918_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 20:13:07 2011] fullrun_ccd2_acisf08918_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct  5 20:13:07 2011] fullrun_ccd2_acisf08918_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct  5 20:13:07 2011] Fit fullrun_ccd2_acisf08918_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct  5 20:13:16 2011] Spatial fit model total counts = 119.476000, observed total counts = 119.000000
[Wed Oct  5 20:13:16 2011] Offset between fit and detection position for source 34 = 0.030174 pixels
[Wed Oct  5 20:13:16 2011] 120.063180 total counts/ 9.881180 bgd. counts: snr = 35.051471
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.030174 pixels
  Position = (1033.9, 401.6) = 0 24 34.88 -2 3 22.0
  Extent = 1.3 (1.2-1.6)", rotation angle = 0
  Source counts = 110.2 +/- 11.0
  Background counts = 9.9
  Rate = 0.004 +/- 0.0004
[Wed Oct  5 20:13:16 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 20:13:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 20:13:16 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 20:13:16 2011] Source does appear to be extended
[Wed Oct  5 20:13:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 20:16:14 2011] Not overwriting source region fullrun_ccd2_acisf08918_pi14-548_pass1_cl_src34_src.reg
[Wed Oct  5 20:16:14 2011] Extracting stamp from image fullrun_ccd2_acisf08918_pi14-548_cl_sm2.00.img.gz, (972, 340) - (1095, 463)
[Wed Oct  5 20:16:14 2011] Writing fullrun_ccd2_acisf08918_pi14-548_pass1_cl_src34.gif
[Wed Oct  5 20:16:16 2011] ../../acisf08918/products/events/fullrun_ccd2_acisf08918_pi14-548_pass1_cl_src34_src.evt and ../../acisf08918/products/events/fullrun_ccd2_acisf08918_pi14-548_pass1_cl_src34_bgd.evt exist, delete to re-create
[Wed Oct  5 20:16:16 2011] Size of ../../acisf08918/products/events/fullrun_ccd2_acisf08918_pi14-548_pass1_cl_src34_src.evt.gz[events] = 118 counts
[Wed Oct  5 20:16:16 2011] Mean chipx,y = (74.14, 416.37)
[Wed Oct  5 20:16:16 2011] Mean tdetx,y = (3477.37, 4011.86)
[Wed Oct  5 20:16:16 2011] chipx,y range = (54.00-95.00, 394.00-437.00)
[Wed Oct  5 20:16:16 2011] Size of ../../acisf08918/products/events/fullrun_ccd2_acisf08918_pi14-548_pass1_cl_src34_bgd.evt.gz[events] = 42 counts
[Wed Oct  5 20:16:16 2011] ../../acisf08918/products/images/fullrun_ccd2_acisf08918_pi14-548_pass1_cl_src34_src.img and ../../acisf08918/products/images/fullrun_ccd2_acisf08918_pi14-548_pass1_cl_src34_bgd.img exist, delete to re-create
[Wed Oct  5 20:16:16 2011] ../../acisf08918/products/spectra/fullrun_ccd2_acisf08918_pi14-548_pass1_cl_src34_src.pi and ../../acisf08918/products/spectra/fullrun_ccd2_acisf08918_pi14-548_pass1_cl_src34_bgd.pi exist, delete to re-create
[Wed Oct  5 20:16:20 2011] ../../acisf08918/products/lightcurves/fullrun_ccd2_acisf08918_pi14-548_pass1_cl_src34_src.lc and ../../acisf08918/products/lightcurves/fullrun_ccd2_acisf08918_pi14-548_pass1_cl_src34_bgd.lc exist, delete to re-create
[Wed Oct  5 20:18:47 2011] Keeping rmf generated by specextract
[Wed Oct  5 20:18:47 2011] 184.38
[Wed Oct  5 20:21:36 2011] Updating aperture counts using extracted products
[Wed Oct  5 20:21:36 2011] Error reading totcts from fullrun_ccd2_acisf08918_pi14-548_pass1_cl_src34_src.pi.gz
[Wed Oct  5 20:21:37 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 20:21:37 2011] Using photon index=1.80, rate=0.0037, arf fullrun_ccd2_acisf08918_pi14-548_pass1_cl_src34.arf
[Wed Oct  5 20:21:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 20:21:37 2011] Updating source flux to 4.6e-14
[Wed Oct  5 20:21:52 2011] Reading fit data from acisf08918/analysis//spectral/fullrun_ccd2_acisf08918_pi14-548_pass1_cl_src34_pl.csv
[Wed Oct  5 20:21:52 2011] Spectral fit parameter nH value = 1.84335e+15
[Wed Oct  5 20:21:52 2011] Spectral fit parameter PhoIndex value = 2.3249
[Wed Oct  5 20:21:52 2011] Failed to get F(0.3-8.0) from acisf08918/analysis//spectral/fullrun_ccd2_acisf08918_pi14-548_pass1_cl_src34_pl.csv, possibly due to different flux energy range selected
[Wed Oct  5 20:21:52 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 20:21:52 2011] Using Nh = 1.8e+15, photon index=2.32, rate=0.0037, arf fullrun_ccd2_acisf08918_pi14-548_pass1_cl_src34.arf
[Wed Oct  5 20:21:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 20:21:52 2011] Updating source flux to 4.8e-14