[Mon Oct 10 05:41:30 2011] Detection parameters:
  Position = (351.1, 908.3) = 20 11 27.48 -56 44 7.1
  Extent = 0.6" x 0.5", rotation angle = 164 degrees
  Source counts = 2217.1 +/- 47.4
  Background counts = 28.9
  Rate = 0.04 +/- 0.0009

[Mon Oct 10 05:41:31 2011] Off-axis axis estimate = 3.60'
[Mon Oct 10 05:43:08 2011] Using EEF radius (= 0.72 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 05:43:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 10 05:43:08 2011] Initial guess for spatial extent in simple fitting = 0.72"
[Mon Oct 10 05:43:08 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.043
[Mon Oct 10 05:43:08 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.72"
[Mon Oct 10 05:43:09 2011] fullrun_ccd1_acisf00889_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 10 05:43:09 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf00889_pi14-548_cl_pass0_src1.csv
[Mon Oct 10 05:43:09 2011] fullrun_ccd1_acisf00889_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 10 05:43:09 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf00889_pi14-548_cl_pass0_src1.csv
[Mon Oct 10 05:43:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00889_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00889_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 05:43:09 2011] fullrun_ccd1_acisf00889_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 10 05:43:09 2011] fullrun_ccd1_acisf00889_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 10 05:43:09 2011] Fit fullrun_ccd1_acisf00889_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 10 05:43:27 2011] Spatial fit model total counts = 2250.210000, observed total counts = 2249.000000
[Mon Oct 10 05:43:27 2011] Offset between fit and detection position for source 1 = 0.674000 pixels
[Mon Oct 10 05:43:27 2011] 2255.254000 total counts/ 121.094000 bgd. counts: snr = 193.939228
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.674000 pixels
  Position = (351.5, 908.9) = 20 11 27.48 -56 44 7.1
  Extent = 0.6 (0.6-0.6)", rotation angle = 0
  Source counts = 2134.2 +/- 47.5
  Background counts = 121.1
  Rate = 0.04 +/- 0.0009
[Mon Oct 10 05:43:27 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 05:43:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 05:43:27 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 05:43:27 2011] Source does appear to be extended
[Mon Oct 10 05:43:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 05:43:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 05:43:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 10 05:43:52 2011] Initial guess for spatial extent in simple fitting = 0.61"
[Mon Oct 10 05:43:52 2011] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.993
[Mon Oct 10 05:43:52 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.61"
[Mon Oct 10 05:43:52 2011] fullrun_ccd1_acisf00889_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 10 05:43:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00889_pi14-548_cl_pass1_src1.csv
[Mon Oct 10 05:43:52 2011] fullrun_ccd1_acisf00889_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 10 05:43:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf00889_pi14-548_cl_pass1_src1.csv
[Mon Oct 10 05:43:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf00889_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf00889_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 05:43:53 2011] fullrun_ccd1_acisf00889_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 10 05:43:53 2011] fullrun_ccd1_acisf00889_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 10 05:43:53 2011] Fit fullrun_ccd1_acisf00889_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 10 05:44:02 2011] Spatial fit model total counts = 2252.420000, observed total counts = 2249.000000
[Mon Oct 10 05:44:02 2011] Offset between fit and detection position for source 1 = 0.000829 pixels
[Mon Oct 10 05:44:02 2011] 2257.548000 total counts/ 122.308000 bgd. counts: snr = 193.071986
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000829 pixels
  Position = (351.5, 908.9) = 20 11 27.48 -56 44 7.1
  Extent = 0.6 (0.6-0.6)", rotation angle = 0
  Source counts = 2135.2 +/- 47.5
  Background counts = 122.3
  Rate = 0.04 +/- 0.0009
[Mon Oct 10 05:44:02 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 05:44:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 05:44:02 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 05:44:02 2011] Source does appear to be extended
[Mon Oct 10 05:44:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 05:44:58 2011] Not overwriting source region fullrun_ccd1_acisf00889_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 10 05:44:58 2011] Extracting stamp from image fullrun_ccd1_acisf00889_pi14-548_cl_sm2.00.img.gz, (324, 881) - (379, 937)
[Mon Oct 10 05:44:58 2011] Writing fullrun_ccd1_acisf00889_pi14-548_pass1_cl_src1.gif
[Mon Oct 10 05:44:59 2011] ../../acisf00889/products/events/fullrun_ccd1_acisf00889_pi14-548_pass1_cl_src1_src.evt and ../../acisf00889/products/events/fullrun_ccd1_acisf00889_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 10 05:44:59 2011] Size of ../../acisf00889/products/events/fullrun_ccd1_acisf00889_pi14-548_pass1_cl_src1_src.evt.gz[events] = 2186 counts
[Mon Oct 10 05:44:59 2011] Mean chipx,y = (105.36, 595.26)
[Mon Oct 10 05:44:59 2011] Mean tdetx,y = (4536.74, 4212.36)
[Mon Oct 10 05:44:59 2011] chipx,y range = (85.00-125.00, 576.00-615.00)
[Mon Oct 10 05:44:59 2011] Size of ../../acisf00889/products/events/fullrun_ccd1_acisf00889_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 103 counts
[Mon Oct 10 05:44:59 2011] ../../acisf00889/products/images/fullrun_ccd1_acisf00889_pi14-548_pass1_cl_src1_src.img and ../../acisf00889/products/images/fullrun_ccd1_acisf00889_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 10 05:44:59 2011] ../../acisf00889/products/spectra/fullrun_ccd1_acisf00889_pi14-548_pass1_cl_src1_src.pi and ../../acisf00889/products/spectra/fullrun_ccd1_acisf00889_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct 10 05:45:02 2011] ../../acisf00889/products/lightcurves/fullrun_ccd1_acisf00889_pi14-548_pass1_cl_src1_src.lc and ../../acisf00889/products/lightcurves/fullrun_ccd1_acisf00889_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 10 05:45:44 2011] Keeping rmf generated by specextract
[Mon Oct 10 05:45:44 2011] 198.761
[Mon Oct 10 05:47:21 2011] Updating aperture counts using extracted products
[Mon Oct 10 05:47:21 2011] Error reading totcts from fullrun_ccd1_acisf00889_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct 10 05:47:22 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 05:47:22 2011] Using photon index=1.80, rate=0.0424, arf fullrun_ccd1_acisf00889_pi14-548_pass1_cl_src1.arf
[Mon Oct 10 05:47:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 05:47:22 2011] Updating source flux to 4.4e-13
[Mon Oct 10 05:47:37 2011] Reading fit data from acisf00889/analysis//spectral/fullrun_ccd1_acisf00889_pi14-548_pass1_cl_src1_pl.csv
[Mon Oct 10 05:47:37 2011] Spectral fit parameter nH value = 2.88378e+20
[Mon Oct 10 05:47:37 2011] Spectral fit parameter PhoIndex value = 2.24125
[Mon Oct 10 05:47:37 2011] Failed to get F(0.3-8.0) from acisf00889/analysis//spectral/fullrun_ccd1_acisf00889_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Oct 10 05:47:37 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 05:47:37 2011] Using Nh = 2.9e+20, photon index=2.24, rate=0.0424, arf fullrun_ccd1_acisf00889_pi14-548_pass1_cl_src1.arf
[Mon Oct 10 05:47:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 05:47:37 2011] Updating source flux to 4.1e-13