[Sun Apr 29 06:00:00 2012] Detection parameters:
  Position = (907.6, 422.4) = 16 37 6.01 41 0 54.4
  Extent = 0.7" x 0.5", rotation angle = 141 degrees
  Source counts = 10.8 +/- 3.5
  Background counts = 1.2
  Rate = 0.0001 +/- 5e-05

[Sun Apr 29 06:00:02 2012] Off-axis axis estimate = 3.61'
[Sun Apr 29 07:42:10 2012] Using EEF radius (= 0.72 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 07:42:10 2012] Initial guess for spatial extent in simple fitting = 0.72"
[Sun Apr 29 07:42:10 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.036
[Sun Apr 29 07:42:10 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 0.72"
[Sun Apr 29 08:09:36 2012] fullrun_ccd3_acisf00887_pi14-548_cl_pass0_src21.ximg exists
[Sun Apr 29 08:09:36 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf00887_pi14-548_cl_pass0_src21.csv
[Sun Apr 29 08:09:36 2012] fullrun_ccd3_acisf00887_pi14-548_cl_pass0_src21_1.ximg exists
[Sun Apr 29 08:09:36 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf00887_pi14-548_cl_pass0_src21.csv
[Sun Apr 29 08:09:36 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00887_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00887_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 08:09:37 2012] fullrun_ccd3_acisf00887_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Sun Apr 29 08:09:37 2012] fullrun_ccd3_acisf00887_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Apr 29 08:09:37 2012] Fit fullrun_ccd3_acisf00887_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Sun Apr 29 08:26:03 2012] Spatial fit model total counts = 12.186400, observed total counts = 13.000000
[Sun Apr 29 08:26:03 2012] Offset between fit and detection position for source 18 = 0.726864 pixels
[Sun Apr 29 08:26:03 2012] 12.585495 total counts/ 0.000795 bgd. counts: snr = 446.448731
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.726864 pixels
  Position = (908.2, 422.8) = 16 37 6.00 41 0 54.3
  Extent = 0.8 (0.7-1.2)", rotation angle = 0
  Source counts = 12.6 +/- 3.5
  Background counts = 0.0
  Rate = 0.0002 +/- 5e-05
[Sun Apr 29 08:26:03 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 08:26:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 08:26:03 2012] Assessing source extent using major axis lower bound
[Sun Apr 29 08:26:03 2012] Source does appear to be extended
[Sun Apr 29 08:26:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr 29 09:50:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Apr 29 09:50:14 2012] Initial guess for spatial extent in simple fitting = 0.81"
[Sun Apr 29 09:50:14 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.869
[Sun Apr 29 09:50:14 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 0.81"
[Sun Apr 29 10:13:27 2012] fullrun_ccd3_acisf00887_pi14-548_cl_pass1_src20.ximg exists
[Sun Apr 29 10:13:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00887_pi14-548_cl_pass1_src20.csv
[Sun Apr 29 10:13:27 2012] fullrun_ccd3_acisf00887_pi14-548_cl_pass1_src20_1.ximg exists
[Sun Apr 29 10:13:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00887_pi14-548_cl_pass1_src20.csv
[Sun Apr 29 10:13:27 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00887_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00887_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 10:13:28 2012] fullrun_ccd3_acisf00887_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Sun Apr 29 10:13:28 2012] fullrun_ccd3_acisf00887_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Sun Apr 29 10:13:28 2012] Fit fullrun_ccd3_acisf00887_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Sun Apr 29 10:30:56 2012] Spatial fit model total counts = 12.556200, observed total counts = 13.000000
[Sun Apr 29 10:30:56 2012] Offset between fit and detection position for source 18 = 0.196101 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.196101 pixels
  Position = (908.0, 422.9) = 16 37 6.01 41 0 54.4
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 13.0 +/- 3.6
  Background counts = 0.0
  Rate = 0.0002 +/- 5e-05
[Sun Apr 29 10:30:56 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 10:30:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 10:30:56 2012] Assessing source extent using major axis lower bound
[Sun Apr 29 10:30:56 2012] Source does appear to be extended
[Sun Apr 29 10:30:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr 29 11:13:39 2012] Writing source region out to fullrun_ccd3_acisf00887_pi14-548_pass1_cl_src18_src.reg
[Sun Apr 29 11:13:39 2012] Extracting stamp from image fullrun_ccd3_acisf00887_pi14-548_cl_sm2.00.img.gz, (871, 386) - (945, 460)
[Sun Apr 29 11:13:39 2012] Writing fullrun_ccd3_acisf00887_pi14-548_pass1_cl_src18.gif
[Sun Apr 29 11:24:19 2012] Size of ../../acisf00887/products/events/fullrun_ccd3_acisf00887_pi14-548_pass1_cl_src18_src.evt.gz[events] = 13 counts
[Sun Apr 29 11:24:19 2012] Mean chipx,y = (558.00, 850.46)
[Sun Apr 29 11:24:19 2012] Mean tdetx,y = (4281.54, 3619.00)
[Sun Apr 29 11:24:19 2012] chipx,y range = (537.00-576.00, 834.00-867.00)
[Sun Apr 29 11:24:19 2012] Size of ../../acisf00887/products/events/fullrun_ccd3_acisf00887_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 21 counts
[Sun Apr 29 11:24:20 2012] Not generating rmf since there are only 12 counts
[Sun Apr 29 11:24:20 2012] arf not found, will run specextract
[Sun Apr 29 11:24:46 2012] ../../acisf00887/products/spectra/fullrun_ccd3_acisf00887_pi14-548_pass1_cl_src18.warf not found
[Sun Apr 29 11:24:46 2012] ../../acisf00887/products/spectra/fullrun_ccd3_acisf00887_pi14-548_pass1_cl_src18.wrmf not found
[Sun Apr 29 11:24:46 2012] Removal of ../../acisf00887/products/spectra/fullrun_ccd3_acisf00887_pi14-548_pass1_cl_src18.soff failed
[Sun Apr 29 11:26:03 2012] Spectrum 18 has only 13 counts, deleting rmf
[Sun Apr 29 11:26:03 2012] 195.171
[Sun Apr 29 11:27:38 2012] Updating aperture counts using extracted products
[Sun Apr 29 11:27:38 2012] Error reading totcts from fullrun_ccd3_acisf00887_pi14-548_pass1_cl_src18_src.pi.gz
[Sun Apr 29 11:27:38 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr 29 11:27:38 2012] Using photon index=1.80, rate=0.000177, arf fullrun_ccd3_acisf00887_pi14-548_pass1_cl_src18.arf
[Sun Apr 29 11:27:38 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Apr 29 11:27:38 2012] Updating source flux to 1.9e-15
[Sun Apr 29 11:28:06 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting