[Mon Sep 26 22:07:46 2011] Detection parameters:
  Position = (685.5, 228.9) = 16 46 34.71 35 3 17.9
  Extent = 0.6" x 0.5", rotation angle = 137 degrees
  Source counts = 131.2 +/- 11.5
  Background counts = 0.8
  Rate = 0.02 +/- 0.001

[Mon Sep 26 22:07:46 2011] Off-axis axis estimate = 4.34'
[Mon Sep 26 22:08:25 2011] Using EEF radius (= 0.94 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 22:08:25 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 22:08:25 2011] Initial guess for spatial extent in simple fitting = 0.94"
[Mon Sep 26 22:08:25 2011] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.864
[Mon Sep 26 22:08:25 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.94"
[Mon Sep 26 22:08:25 2011] fullrun_ccd3_acisf08637_pi14-548_cl_pass0_src1.ximg exists
[Mon Sep 26 22:08:25 2011] fullrun_ccd3_acisf08637_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Sep 26 22:08:25 2011] Fit fullrun_ccd3_acisf08637_pi14-548_cl_pass0_src1 appears to have run properly
[Mon Sep 26 22:08:25 2011] fullrun_ccd3_acisf08637_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Sep 26 22:08:25 2011] fullrun_ccd3_acisf08637_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Sep 26 22:08:25 2011] Fit fullrun_ccd3_acisf08637_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Sep 26 22:08:29 2011] Spatial fit model total counts = 130.253000, observed total counts = 133.000000
[Mon Sep 26 22:08:29 2011] Offset between fit and detection position for source 5 = 0.687627 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.687627 pixels
  Position = (685.9, 229.5) = 16 46 34.71 35 3 17.9
  Extent = 0.9 (0.8-1.0)" x 0.6 (0.5-0.6)", rotation angle = 43 (30-54) degrees
  Source counts = 131.0 +/- 11.4
  Background counts = 0.0
  Rate = 0.02 +/- 0.001
[Mon Sep 26 22:08:29 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 22:08:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 22:08:29 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 22:08:29 2011] Source does appear to be extended
[Mon Sep 26 22:08:29 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.26
[Mon Sep 26 22:08:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 22:08:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 22:08:41 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Mon Sep 26 22:08:41 2011] source mask rpix=1.4, npix_max = 15, mask sum = 12, frac = 0.791
[Mon Sep 26 22:08:41 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.71"
[Mon Sep 26 22:08:41 2011] fullrun_ccd3_acisf08637_pi14-548_cl_pass1_src1.ximg exists
[Mon Sep 26 22:08:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08637_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 22:08:41 2011] fullrun_ccd3_acisf08637_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Sep 26 22:08:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08637_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 22:08:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08637_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08637_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 22:08:42 2011] fullrun_ccd3_acisf08637_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Sep 26 22:08:42 2011] fullrun_ccd3_acisf08637_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Sep 26 22:08:42 2011] Fit fullrun_ccd3_acisf08637_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Sep 26 22:08:45 2011] Spatial fit model total counts = 127.618000, observed total counts = 133.000000
[Mon Sep 26 22:08:45 2011] Offset between fit and detection position for source 5 = 0.003836 pixels
[Mon Sep 26 22:08:45 2011] 128.250534 total counts/ 0.220534 bgd. counts: snr = 272.630204
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.003836 pixels
  Position = (685.9, 229.5) = 16 46 34.71 35 3 17.9
  Extent = 0.7 (0.7-0.8)", rotation angle = 0
  Source counts = 128.0 +/- 11.3
  Background counts = 0.2
  Rate = 0.01 +/- 0.001
[Mon Sep 26 22:08:45 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 22:08:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 22:08:45 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 22:08:45 2011] Source does appear to be extended
[Mon Sep 26 22:08:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 22:09:20 2011] Not overwriting source region fullrun_ccd3_acisf08637_pi14-548_pass1_cl_src5_src.reg
[Mon Sep 26 22:09:20 2011] Extracting stamp from image fullrun_ccd3_acisf08637_pi14-548_cl_sm2.00.img.gz, (653, 196) - (719, 263)
[Mon Sep 26 22:09:20 2011] Writing fullrun_ccd3_acisf08637_pi14-548_pass1_cl_src5.gif
[Mon Sep 26 22:09:20 2011] ../../acisf08637/products/events/fullrun_ccd3_acisf08637_pi14-548_pass1_cl_src5_src.evt and ../../acisf08637/products/events/fullrun_ccd3_acisf08637_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Mon Sep 26 22:09:20 2011] Size of ../../acisf08637/products/events/fullrun_ccd3_acisf08637_pi14-548_pass1_cl_src5_src.evt.gz[events] = 131 counts
[Mon Sep 26 22:09:20 2011] Mean chipx,y = (886.32, 496.80)
[Mon Sep 26 22:09:20 2011] Mean tdetx,y = (4635.20, 3947.32)
[Mon Sep 26 22:09:20 2011] chipx,y range = (868.00-906.00, 478.00-516.00)
[Mon Sep 26 22:09:20 2011] Size of ../../acisf08637/products/events/fullrun_ccd3_acisf08637_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 6 counts
[Mon Sep 26 22:09:20 2011] ../../acisf08637/products/images/fullrun_ccd3_acisf08637_pi14-548_pass1_cl_src5_src.img and ../../acisf08637/products/images/fullrun_ccd3_acisf08637_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Mon Sep 26 22:09:20 2011] ../../acisf08637/products/spectra/fullrun_ccd3_acisf08637_pi14-548_pass1_cl_src5_src.pi and ../../acisf08637/products/spectra/fullrun_ccd3_acisf08637_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Mon Sep 26 22:09:23 2011] ../../acisf08637/products/lightcurves/fullrun_ccd3_acisf08637_pi14-548_pass1_cl_src5_src.lc and ../../acisf08637/products/lightcurves/fullrun_ccd3_acisf08637_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Mon Sep 26 22:09:35 2011] Keeping rmf generated by specextract
[Mon Sep 26 22:09:36 2011] 192.894
[Mon Sep 26 22:09:40 2011] Updating aperture counts using extracted products
[Mon Sep 26 22:09:41 2011] Error reading totcts from fullrun_ccd3_acisf08637_pi14-548_pass1_cl_src5_src.pi.gz
[Mon Sep 26 22:09:41 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 22:09:41 2011] Using photon index=1.80, rate=0.0149, arf fullrun_ccd3_acisf08637_pi14-548_pass1_cl_src5.arf
[Mon Sep 26 22:09:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 22:09:41 2011] Updating source flux to 1.8e-13
[Mon Sep 26 22:09:49 2011] Reading fit data from acisf08637/analysis//spectral/fullrun_ccd3_acisf08637_pi14-548_pass1_cl_src5_pl.csv
[Mon Sep 26 22:09:49 2011] Spectral fit parameter nH value = 7.67413e+18
[Mon Sep 26 22:09:49 2011] Spectral fit parameter PhoIndex value = 1.9051
[Mon Sep 26 22:09:49 2011] Failed to get F(0.3-8.0) from acisf08637/analysis//spectral/fullrun_ccd3_acisf08637_pi14-548_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Mon Sep 26 22:09:49 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 22:09:49 2011] Using Nh = 7.7e+18, photon index=1.91, rate=0.0149, arf fullrun_ccd3_acisf08637_pi14-548_pass1_cl_src5.arf
[Mon Sep 26 22:09:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 22:09:49 2011] Updating source flux to 1.8e-13