[Sat Oct 15 08:02:44 2011] Detection parameters:
  Position = (262.6, 561.0) = 2 31 23.93 0 44 28.2
  Extent = 3.6" x 3.1", rotation angle = 16 degrees
  Source counts = 10.7 +/- 4.0
  Background counts = 5.3
  Rate = 0.001 +/- 0.0005

[Sat Oct 15 08:02:44 2011] Off-axis axis estimate = 2.99'
[Sat Oct 15 08:03:26 2011] Using EEF radius (= 0.58 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 08:03:26 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Sat Oct 15 08:03:26 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.067
[Sat Oct 15 08:03:26 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.58"
[Sat Oct 15 08:03:26 2011] fullrun_ccd1_acisf08625_pi14-548_cl_pass0_src3.ximg exists
[Sat Oct 15 08:03:26 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf08625_pi14-548_cl_pass0_src3.csv
[Sat Oct 15 08:03:26 2011] fullrun_ccd1_acisf08625_pi14-548_cl_pass0_src3_1.ximg exists
[Sat Oct 15 08:03:26 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf08625_pi14-548_cl_pass0_src3.csv
[Sat Oct 15 08:03:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf08625_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf08625_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 08:03:26 2011] fullrun_ccd1_acisf08625_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sat Oct 15 08:03:26 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf08625_pi14-548_cl_pass0_tfrozen_src3.csv
[Sat Oct 15 08:03:26 2011] fullrun_ccd1_acisf08625_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Oct 15 08:03:26 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf08625_pi14-548_cl_pass0_tfrozen_src3.csv
[Sat Oct 15 08:03:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf08625_pi14-548_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf08625_pi14-548_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 08:03:33 2011] Source 7 is offset by -5.081789 and -5.706789 pixels which is larger than
2 X fitted extent = 6.097561 x 0.588350, not incorporating fit results
[Sat Oct 15 08:03:33 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 08:03:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 08:03:33 2011] Assessing source extent using major
[Sat Oct 15 08:03:33 2011] Source does appear to be extended
[Sat Oct 15 08:03:33 2011] Computing asymmetry using major and minor axis, asym = 1.15
[Sat Oct 15 08:03:51 2011] Using EEF radius (= 0.58 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 08:03:51 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Sat Oct 15 08:03:51 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.067
[Sat Oct 15 08:03:51 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.58"
[Sat Oct 15 08:03:51 2011] fullrun_ccd1_acisf08625_pi14-548_cl_pass1_src3.ximg exists
[Sat Oct 15 08:03:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08625_pi14-548_cl_pass1_src3.csv
[Sat Oct 15 08:03:51 2011] fullrun_ccd1_acisf08625_pi14-548_cl_pass1_src3_1.ximg exists
[Sat Oct 15 08:03:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08625_pi14-548_cl_pass1_src3.csv
[Sat Oct 15 08:03:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf08625_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf08625_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 08:03:51 2011] fullrun_ccd1_acisf08625_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sat Oct 15 08:03:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08625_pi14-548_cl_pass1_tfrozen_src3.csv
[Sat Oct 15 08:03:51 2011] fullrun_ccd1_acisf08625_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Oct 15 08:03:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08625_pi14-548_cl_pass1_tfrozen_src3.csv
[Sat Oct 15 08:03:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf08625_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf08625_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 08:03:59 2011] Source 7 is offset by -3.882947 and 3.702683 pixels which is larger than
2 X fitted extent = 2.317352 x 2.317352, not incorporating fit results
[Sat Oct 15 08:03:59 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 08:03:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 08:03:59 2011] Assessing source extent using major
[Sat Oct 15 08:03:59 2011] Source does appear to be extended
[Sat Oct 15 08:03:59 2011] Computing asymmetry using major and minor axis, asym = 1.15
[Sat Oct 15 08:04:40 2011] Not overwriting source region fullrun_ccd1_acisf08625_pi14-548_pass1_cl_src7_src.reg
[Sat Oct 15 08:04:40 2011] Extracting stamp from image fullrun_ccd1_acisf08625_pi14-548_cl_sm2.00.img.gz, (99, 398) - (426, 724)
[Sat Oct 15 08:04:40 2011] Writing fullrun_ccd1_acisf08625_pi14-548_pass1_cl_src7.gif
[Sat Oct 15 08:04:47 2011] ../../acisf08625/products/events/fullrun_ccd1_acisf08625_pi14-548_pass1_cl_src7_src.evt and ../../acisf08625/products/events/fullrun_ccd1_acisf08625_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Sat Oct 15 08:04:47 2011] Size of ../../acisf08625/products/events/fullrun_ccd1_acisf08625_pi14-548_pass1_cl_src7_src.evt.gz[events] = 21 counts
[Sat Oct 15 08:04:47 2011] Mean chipx,y = (247.81, 893.10)
[Sat Oct 15 08:04:47 2011] Mean tdetx,y = (4238.90, 4354.81)
[Sat Oct 15 08:04:47 2011] chipx,y range = (222.00-271.00, 865.00-921.00)
[Sat Oct 15 08:04:47 2011] Size of ../../acisf08625/products/events/fullrun_ccd1_acisf08625_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 68 counts
[Sat Oct 15 08:04:47 2011] ../../acisf08625/products/images/fullrun_ccd1_acisf08625_pi14-548_pass1_cl_src7_src.img and ../../acisf08625/products/images/fullrun_ccd1_acisf08625_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Sat Oct 15 08:04:47 2011] ../../acisf08625/products/spectra/fullrun_ccd1_acisf08625_pi14-548_pass1_cl_src7_src.pi and ../../acisf08625/products/spectra/fullrun_ccd1_acisf08625_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Sat Oct 15 08:04:47 2011] Not generating rmf since there are only 10 counts
[Sat Oct 15 08:04:52 2011] ../../acisf08625/products/lightcurves/fullrun_ccd1_acisf08625_pi14-548_pass1_cl_src7_src.lc and ../../acisf08625/products/lightcurves/fullrun_ccd1_acisf08625_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Sat Oct 15 08:05:16 2011] 192.255
[Sat Oct 15 08:05:51 2011] Updating aperture counts using extracted products
[Sat Oct 15 08:05:51 2011] Error reading totcts from fullrun_ccd1_acisf08625_pi14-548_pass1_cl_src7_src.pi.gz
[Sat Oct 15 08:05:51 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 08:05:51 2011] Using photon index=1.80, rate=0.00123, arf fullrun_ccd1_acisf08625_pi14-548_pass1_cl_src7.arf
[Sat Oct 15 08:05:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 08:05:51 2011] Updating source flux to 1.5e-14
[Sat Oct 15 08:05:54 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Oct 15 08:05:55 2011] acisf08625/analysis//spectral/fullrun_ccd1_acisf08625_pi14-548_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete