[Fri Sep 30 14:04:54 2011] Detection parameters:
  Position = (719.2, 210.3) = 23 48 5.97 1 0 29.4
  Extent = 0.8" x 0.6", rotation angle = 32 degrees
  Source counts = 10.3 +/- 3.3
  Background counts = 0.7
  Rate = 0.0004 +/- 0.0001

[Fri Sep 30 14:04:55 2011] Off-axis axis estimate = 3.57'
[Fri Sep 30 14:06:17 2011] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 14:06:17 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Fri Sep 30 14:06:17 2011] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.059
[Fri Sep 30 14:06:17 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 0.71"
[Fri Sep 30 14:06:19 2011] fullrun_ccd6_acisf00861_pi14-548_cl_pass0_src12.ximg exists
[Fri Sep 30 14:06:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00861_pi14-548_cl_pass0_src12.csv
[Fri Sep 30 14:06:19 2011] fullrun_ccd6_acisf00861_pi14-548_cl_pass0_src12_1.ximg exists
[Fri Sep 30 14:06:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00861_pi14-548_cl_pass0_src12.csv
[Fri Sep 30 14:06:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00861_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00861_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 14:06:20 2011] fullrun_ccd6_acisf00861_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Fri Sep 30 14:06:20 2011] fullrun_ccd6_acisf00861_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Sep 30 14:06:20 2011] Fit fullrun_ccd6_acisf00861_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Fri Sep 30 14:06:41 2011] Spatial fit model total counts = 11.608800, observed total counts = 12.000000
[Fri Sep 30 14:06:41 2011] Offset between fit and detection position for source 5 = 0.588654 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.588654 pixels
  Position = (719.7, 210.7) = 23 48 5.97 1 0 29.4
  Extent = 1.0 (0.6-1.4)", rotation angle = 0
  Source counts = 12.0 +/- 3.5
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Fri Sep 30 14:06:41 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 14:06:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 14:06:41 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 14:06:41 2011] Source does appear to be extended
[Fri Sep 30 14:06:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 14:07:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 14:07:24 2011] Initial guess for spatial extent in simple fitting = 0.99"
[Fri Sep 30 14:07:24 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.992
[Fri Sep 30 14:07:24 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 0.99"
[Fri Sep 30 14:07:26 2011] fullrun_ccd6_acisf00861_pi14-548_cl_pass1_src12.ximg exists
[Fri Sep 30 14:07:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00861_pi14-548_cl_pass1_src12.csv
[Fri Sep 30 14:07:26 2011] fullrun_ccd6_acisf00861_pi14-548_cl_pass1_src12_1.ximg exists
[Fri Sep 30 14:07:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00861_pi14-548_cl_pass1_src12.csv
[Fri Sep 30 14:07:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00861_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00861_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 14:07:26 2011] fullrun_ccd6_acisf00861_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Fri Sep 30 14:07:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00861_pi14-548_cl_pass1_tfrozen_src12.csv
[Fri Sep 30 14:07:26 2011] fullrun_ccd6_acisf00861_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Sep 30 14:07:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00861_pi14-548_cl_pass1_tfrozen_src12.csv
[Fri Sep 30 14:07:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00861_pi14-548_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00861_pi14-548_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 14:07:44 2011] Spatial fit model total counts = 10.377800, observed total counts = 12.000000
[Fri Sep 30 14:07:44 2011] Offset between fit and detection position for source 5 = 0.134239 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.134239 pixels
  Position = (719.6, 210.7) = 23 48 5.97 1 0 29.4
  Extent = 0.9 (0.6-1.2)", rotation angle = 0
  Source counts = 10.7 +/- 3.3
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Fri Sep 30 14:07:44 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 14:07:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 14:07:44 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 14:07:44 2011] Source does appear to be extended
[Fri Sep 30 14:07:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 15:06:34 2011] Not overwriting source region fullrun_ccd6_acisf00861_pi14-548_pass1_cl_src5_src.reg
[Fri Sep 30 15:06:34 2011] Extracting stamp from image fullrun_ccd6_acisf00861_pi14-548_cl_sm2.00.img.gz, (677, 168) - (762, 253)
[Fri Sep 30 15:06:34 2011] Writing fullrun_ccd6_acisf00861_pi14-548_pass1_cl_src5.gif
[Fri Sep 30 15:17:01 2011] ../../acisf00861/products/events/fullrun_ccd6_acisf00861_pi14-548_pass1_cl_src5_src.evt and ../../acisf00861/products/events/fullrun_ccd6_acisf00861_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Fri Sep 30 15:17:01 2011] Size of ../../acisf00861/products/events/fullrun_ccd6_acisf00861_pi14-548_pass1_cl_src5_src.evt.gz[events] = 11 counts
[Fri Sep 30 15:17:01 2011] Mean chipx,y = (900.82, 279.55)
[Fri Sep 30 15:17:01 2011] Mean tdetx,y = (3775.82, 1981.55)
[Fri Sep 30 15:17:01 2011] chipx,y range = (881.00-915.00, 267.00-297.00)
[Fri Sep 30 15:17:01 2011] Size of ../../acisf00861/products/events/fullrun_ccd6_acisf00861_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 13 counts
[Fri Sep 30 15:17:01 2011] ../../acisf00861/products/images/fullrun_ccd6_acisf00861_pi14-548_pass1_cl_src5_src.img and ../../acisf00861/products/images/fullrun_ccd6_acisf00861_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Fri Sep 30 15:17:01 2011] Not generating rmf since there are only 10 counts
[Fri Sep 30 15:17:01 2011] arf not found, will run specextract
[Fri Sep 30 15:17:38 2011] ../../acisf00861/products/spectra/fullrun_ccd6_acisf00861_pi14-548_pass1_cl_src5.warf not found
[Fri Sep 30 15:17:38 2011] ../../acisf00861/products/spectra/fullrun_ccd6_acisf00861_pi14-548_pass1_cl_src5.wrmf not found
[Fri Sep 30 15:17:38 2011] Removal of ../../acisf00861/products/spectra/fullrun_ccd6_acisf00861_pi14-548_pass1_cl_src5.soff failed
[Fri Sep 30 15:17:47 2011] ../../acisf00861/products/lightcurves/fullrun_ccd6_acisf00861_pi14-548_pass1_cl_src5_src.lc and ../../acisf00861/products/lightcurves/fullrun_ccd6_acisf00861_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Fri Sep 30 15:28:54 2011] Spectrum 5 has only 11 counts, deleting rmf
[Fri Sep 30 15:28:54 2011] 209.609
[Fri Sep 30 15:38:37 2011] Updating aperture counts using extracted products
[Fri Sep 30 15:38:37 2011] Error reading totcts from fullrun_ccd6_acisf00861_pi14-548_pass1_cl_src5_src.pi.gz
[Fri Sep 30 15:38:37 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 15:38:37 2011] Using photon index=1.80, rate=0.000408, arf fullrun_ccd6_acisf00861_pi14-548_pass1_cl_src5.arf
[Fri Sep 30 15:38:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 15:38:37 2011] Updating source flux to 3.8e-15
[Fri Sep 30 15:39:25 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting