[Fri Oct 28 23:51:42 2011] Detection parameters:
  Position = (673.3, 352.4) = 23 32 38.84 0 14 35.0
  Extent = 0.7" x 0.5", rotation angle = 67 degrees
  Source counts = 13.8 +/- 3.7
  Background counts = 0.2
  Rate = 0.002 +/- 0.0004

[Fri Oct 28 23:51:42 2011] Off-axis axis estimate = 5.14'
[Fri Oct 28 23:52:13 2011] Using EEF radius (= 1.24 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 23:52:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 23:52:13 2011] Initial guess for spatial extent in simple fitting = 1.24"
[Fri Oct 28 23:52:13 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.993
[Fri Oct 28 23:52:13 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.24"
[Fri Oct 28 23:52:14 2011] fullrun_ccd2_acisf08601_pi14-548_cl_pass0_src2.ximg exists
[Fri Oct 28 23:52:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08601_pi14-548_cl_pass0_src2.csv
[Fri Oct 28 23:52:14 2011] fullrun_ccd2_acisf08601_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Oct 28 23:52:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08601_pi14-548_cl_pass0_src2.csv
[Fri Oct 28 23:52:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08601_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08601_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 23:52:14 2011] fullrun_ccd2_acisf08601_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Oct 28 23:52:14 2011] fullrun_ccd2_acisf08601_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Oct 28 23:52:14 2011] Fit fullrun_ccd2_acisf08601_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Oct 28 23:52:17 2011] Spatial fit model total counts = 15.457600, observed total counts = 17.000000
[Fri Oct 28 23:52:17 2011] Offset between fit and detection position for source 6 = 1.236634 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.236634 pixels
  Position = (674.0, 353.4) = 23 32 38.84 0 14 35.3
  Extent = 1.3 (0.9-2.0)" x 0.5 (0.3-0.7)", rotation angle = 117 (102-130) degrees
  Source counts = 15.9 +/- 4.0
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Fri Oct 28 23:52:17 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 23:52:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 23:52:17 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 23:52:17 2011] Source does appear to be extended
[Fri Oct 28 23:52:17 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.23
[Fri Oct 28 23:52:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 23:52:31 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Fri Oct 28 23:52:31 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.957
[Fri Oct 28 23:52:31 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.88"
[Fri Oct 28 23:52:31 2011] fullrun_ccd2_acisf08601_pi14-548_cl_pass1_src2.ximg exists
[Fri Oct 28 23:52:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08601_pi14-548_cl_pass1_src2.csv
[Fri Oct 28 23:52:31 2011] fullrun_ccd2_acisf08601_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Oct 28 23:52:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08601_pi14-548_cl_pass1_src2.csv
[Fri Oct 28 23:52:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08601_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08601_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 23:52:31 2011] fullrun_ccd2_acisf08601_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Oct 28 23:52:31 2011] fullrun_ccd2_acisf08601_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Oct 28 23:52:31 2011] Fit fullrun_ccd2_acisf08601_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Oct 28 23:52:34 2011] Spatial fit model total counts = 15.298000, observed total counts = 17.000000
[Fri Oct 28 23:52:34 2011] Offset between fit and detection position for source 6 = 0.122925 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.122925 pixels
  Position = (674.1, 353.5) = 23 32 38.84 0 14 35.3
  Extent = 1.3 (0.9-1.8)" x 0.5 (0.4-0.7)", rotation angle = 117 (102-130) degrees
  Source counts = 15.4 +/- 3.9
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Fri Oct 28 23:52:34 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 23:52:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 23:52:34 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 23:52:34 2011] Source does appear to be extended
[Fri Oct 28 23:52:34 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.31
[Fri Oct 28 23:53:21 2011] Not overwriting source region fullrun_ccd2_acisf08601_pi14-548_pass1_cl_src6_src.reg
[Fri Oct 28 23:53:21 2011] Extracting stamp from image fullrun_ccd2_acisf08601_pi14-548_cl_sm2.00.img.gz, (615, 295) - (733, 412)
[Fri Oct 28 23:53:21 2011] Writing fullrun_ccd2_acisf08601_pi14-548_pass1_cl_src6.gif
[Fri Oct 28 23:53:25 2011] ../../acisf08601/products/events/fullrun_ccd2_acisf08601_pi14-548_pass1_cl_src6_src.evt and ../../acisf08601/products/events/fullrun_ccd2_acisf08601_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Fri Oct 28 23:53:25 2011] Size of ../../acisf08601/products/events/fullrun_ccd2_acisf08601_pi14-548_pass1_cl_src6_src.evt.gz[events] = 14 counts
[Fri Oct 28 23:53:25 2011] Mean chipx,y = (652.57, 815.07)
[Fri Oct 28 23:53:25 2011] Mean tdetx,y = (3876.07, 3433.43)
[Fri Oct 28 23:53:25 2011] chipx,y range = (635.00-668.00, 800.00-837.00)
[Fri Oct 28 23:53:25 2011] Size of ../../acisf08601/products/events/fullrun_ccd2_acisf08601_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 10 counts
[Fri Oct 28 23:53:25 2011] ../../acisf08601/products/images/fullrun_ccd2_acisf08601_pi14-548_pass1_cl_src6_src.img and ../../acisf08601/products/images/fullrun_ccd2_acisf08601_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Fri Oct 28 23:53:25 2011] ../../acisf08601/products/spectra/fullrun_ccd2_acisf08601_pi14-548_pass1_cl_src6_src.pi and ../../acisf08601/products/spectra/fullrun_ccd2_acisf08601_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Fri Oct 28 23:53:25 2011] Not generating rmf since there are only 15 counts
[Fri Oct 28 23:53:28 2011] ../../acisf08601/products/lightcurves/fullrun_ccd2_acisf08601_pi14-548_pass1_cl_src6_src.lc and ../../acisf08601/products/lightcurves/fullrun_ccd2_acisf08601_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Fri Oct 28 23:53:37 2011] 179.506
[Fri Oct 28 23:53:48 2011] Updating aperture counts using extracted products
[Fri Oct 28 23:53:48 2011] Error reading totcts from fullrun_ccd2_acisf08601_pi14-548_pass1_cl_src6_src.pi.gz
[Fri Oct 28 23:53:48 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 23:53:48 2011] Using photon index=1.80, rate=0.0017, arf fullrun_ccd2_acisf08601_pi14-548_pass1_cl_src6.arf
[Fri Oct 28 23:53:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 23:53:48 2011] Updating source flux to 2.2e-14
[Fri Oct 28 23:53:51 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 28 23:53:52 2011] acisf08601/analysis//spectral/fullrun_ccd2_acisf08601_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete