[Tue Jan 17 20:45:43 2012] Detection parameters:
  Position = (539.6, 659.8) = 3 32 10.96 -27 48 56.4
  Extent = 0.6" x 0.5", rotation angle = 143 degrees
  Source counts = 10.9 +/- 3.5
  Background counts = 1.1
  Rate = 0.0002 +/- 6e-05

[Tue Jan 17 20:45:45 2012] Off-axis axis estimate = 4.11'
[Tue Jan 17 21:58:42 2012] Using EEF radius (= 0.86 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 21:58:42 2012] Initial guess for spatial extent in simple fitting = 0.86"
[Tue Jan 17 21:58:42 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.982
[Tue Jan 17 21:58:42 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 0.86"
[Tue Jan 17 22:15:47 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass0_src13.ximg exists
[Tue Jan 17 22:15:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08597_pi14-548_cl_pass0_src13.csv
[Tue Jan 17 22:15:47 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass0_src13_1.ximg exists
[Tue Jan 17 22:15:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08597_pi14-548_cl_pass0_src13.csv
[Tue Jan 17 22:15:47 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08597_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08597_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 22:15:47 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Tue Jan 17 22:15:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08597_pi14-548_cl_pass0_tfrozen_src13.csv
[Tue Jan 17 22:15:47 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Jan 17 22:15:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08597_pi14-548_cl_pass0_tfrozen_src13.csv
[Tue Jan 17 22:15:47 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08597_pi14-548_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08597_pi14-548_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 22:27:29 2012] Spatial fit model total counts = 12.766400, observed total counts = 17.000000
[Tue Jan 17 22:27:29 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jan 17 22:27:29 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 22:27:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 22:27:29 2012] Assessing source extent using major
[Tue Jan 17 22:27:29 2012] Source does appear to be extended
[Tue Jan 17 22:27:29 2012] Computing asymmetry using major and minor axis, asym = 1.16
[Tue Jan 17 23:32:08 2012] Using EEF radius (= 0.86 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 23:32:08 2012] Initial guess for spatial extent in simple fitting = 0.86"
[Tue Jan 17 23:32:08 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.982
[Tue Jan 17 23:32:08 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 0.86"
[Tue Jan 17 23:46:58 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass1_src13.ximg exists
[Tue Jan 17 23:46:58 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass1_src13_1.ximg exists
[Tue Jan 17 23:46:58 2012] Fit fullrun_ccd3_acisf08597_pi14-548_cl_pass1_src13 appears to have run properly
[Tue Jan 17 23:46:58 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Tue Jan 17 23:46:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08597_pi14-548_cl_pass1_tfrozen_src13.csv
[Tue Jan 17 23:46:58 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Jan 17 23:46:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08597_pi14-548_cl_pass1_tfrozen_src13.csv
[Tue Jan 17 23:46:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08597_pi14-548_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08597_pi14-548_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 00:02:10 2012] Source 5 is offset by 6.294533 and -0.670325 pixels which is larger than
2 X fitted extent = 0.748533 x 0.748533, not incorporating fit results
[Wed Jan 18 00:02:10 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 00:02:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 00:02:10 2012] Assessing source extent using major
[Wed Jan 18 00:02:10 2012] Source does appear to be extended
[Wed Jan 18 00:02:10 2012] Computing asymmetry using major and minor axis, asym = 1.16
[Wed Jan 18 00:31:52 2012] Writing source region out to fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src5_src.reg
[Wed Jan 18 00:31:52 2012] Extracting stamp from image fullrun_ccd3_acisf08597_pi14-548_cl_sm2.00.img.gz, (514, 634) - (566, 686)
[Wed Jan 18 00:31:52 2012] Writing fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src5.gif
[Wed Jan 18 00:39:39 2012] Size of ../../acisf08597/products/events/fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src5_src.evt.gz[events] = 12 counts
[Wed Jan 18 00:39:39 2012] Mean chipx,y = (676.50, 612.83)
[Wed Jan 18 00:39:39 2012] Mean tdetx,y = (4519.17, 3737.50)
[Wed Jan 18 00:39:39 2012] chipx,y range = (660.00-692.00, 588.00-624.00)
[Wed Jan 18 00:39:39 2012] Size of ../../acisf08597/products/events/fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 19 counts
[Wed Jan 18 00:39:40 2012] Not generating rmf since there are only 10 counts
[Wed Jan 18 00:39:40 2012] arf not found, will run specextract
[Wed Jan 18 00:40:05 2012] ../../acisf08597/products/spectra/fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src5.warf not found
[Wed Jan 18 00:40:05 2012] ../../acisf08597/products/spectra/fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src5.wrmf not found
[Wed Jan 18 00:40:05 2012] Removal of ../../acisf08597/products/spectra/fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src5.soff failed
[Wed Jan 18 00:50:50 2012] Spectrum 5 has only 11 counts, deleting rmf
[Wed Jan 18 00:50:50 2012] 191.126
[Wed Jan 18 00:52:20 2012] Updating aperture counts using extracted products
[Wed Jan 18 00:52:20 2012] Error reading totcts from fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src5_src.pi.gz
[Wed Jan 18 00:52:20 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 00:52:20 2012] Using photon index=1.80, rate=0.000184, arf fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src5.arf
[Wed Jan 18 00:52:20 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jan 18 00:52:20 2012] Updating source flux to 2.3e-15
[Wed Jan 18 00:52:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jan 18 00:52:43 2012] acisf08597/analysis//spectral/fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete