[Tue Jan 17 20:45:44 2012] Detection parameters:
  Position = (340.6, 418.1) = 3 32 18.34 -27 50 55.4
  Extent = 0.9" x 0.5", rotation angle = 69 degrees
  Source counts = 10.2 +/- 3.5
  Background counts = 1.8
  Rate = 0.0002 +/- 6e-05

[Tue Jan 17 20:45:45 2012] Off-axis axis estimate = 3.66'
[Tue Jan 17 21:58:42 2012] Using EEF radius (= 0.73 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 21:58:42 2012] Initial guess for spatial extent in simple fitting = 0.73"
[Tue Jan 17 21:58:42 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.010
[Tue Jan 17 21:58:42 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 0.73"
[Tue Jan 17 22:15:47 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass0_src14.ximg exists
[Tue Jan 17 22:15:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08597_pi14-548_cl_pass0_src14.csv
[Tue Jan 17 22:15:47 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass0_src14_1.ximg exists
[Tue Jan 17 22:15:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08597_pi14-548_cl_pass0_src14.csv
[Tue Jan 17 22:15:47 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08597_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08597_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 22:15:47 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Tue Jan 17 22:15:47 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Tue Jan 17 22:15:47 2012] Fit fullrun_ccd3_acisf08597_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Tue Jan 17 22:27:29 2012] Spatial fit model total counts = 17.527600, observed total counts = 18.000000
[Tue Jan 17 22:27:29 2012] Offset between fit and detection position for source 22 = 0.580097 pixels
[Tue Jan 17 22:27:29 2012] 18.227490 total counts/ 9.597880 bgd. counts: snr = 2.785502
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.580097 pixels
  Position = (341.0, 418.5) = 3 32 18.34 -27 50 55.5
  Extent = 0.8 (0.5-1.4)", rotation angle = 0
  Source counts = 8.6 +/- 4.3
  Background counts = 9.6
  Rate = 0.0001 +/- 7e-05
[Tue Jan 17 22:27:29 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 22:27:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 22:27:29 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 22:27:29 2012] Source does appear to be extended
[Tue Jan 17 22:27:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 23:32:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 23:32:08 2012] Initial guess for spatial extent in simple fitting = 0.77"
[Tue Jan 17 23:32:08 2012] Spatial fitting skipped for pass 1: source                                 has 8.6 net counts, is at off-axis angle 3.7'
[Wed Jan 18 00:02:10 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 00:02:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 00:02:10 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 00:02:10 2012] Source does appear to be extended
[Wed Jan 18 00:02:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 00:31:52 2012] Writing source region out to fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src22_src.reg
[Wed Jan 18 00:31:52 2012] Extracting stamp from image fullrun_ccd3_acisf08597_pi14-548_cl_sm2.00.img.gz, (306, 383) - (376, 454)
[Wed Jan 18 00:31:52 2012] Writing fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src22.gif
[Wed Jan 18 00:40:13 2012] Size of ../../acisf08597/products/events/fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src22_src.evt.gz[events] = 13 counts
[Wed Jan 18 00:40:13 2012] Mean chipx,y = (988.15, 585.08)
[Wed Jan 18 00:40:13 2012] Mean tdetx,y = (4546.92, 4049.15)
[Wed Jan 18 00:40:13 2012] chipx,y range = (971.00-1007.00, 564.00-600.00)
[Wed Jan 18 00:40:13 2012] Size of ../../acisf08597/products/events/fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src22_bgd.evt.gz[events] = 38 counts
[Wed Jan 18 00:40:14 2012] Not generating rmf since there are only 8 counts
[Wed Jan 18 00:40:14 2012] arf not found, will run specextract
[Wed Jan 18 00:40:42 2012] ../../acisf08597/products/spectra/fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src22.warf not found
[Wed Jan 18 00:40:42 2012] ../../acisf08597/products/spectra/fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src22.wrmf not found
[Wed Jan 18 00:40:42 2012] Removal of ../../acisf08597/products/spectra/fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src22.soff failed
[Wed Jan 18 00:50:50 2012] Spectrum 22 has only 9 counts, deleting rmf
[Wed Jan 18 00:50:50 2012] 197.174
[Wed Jan 18 00:52:20 2012] Updating aperture counts using extracted products
[Wed Jan 18 00:52:20 2012] Error reading totcts from fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src22_src.pi.gz
[Wed Jan 18 00:52:20 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 00:52:20 2012] Using photon index=1.80, rate=0.000146, arf fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src22.arf
[Wed Jan 18 00:52:20 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jan 18 00:52:20 2012] Updating source flux to 1.8e-15
[Wed Jan 18 00:52:42 2012] Source 22 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jan 18 00:52:43 2012] acisf08597/analysis//spectral/fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete