[Tue Jan 17 20:45:44 2012] Detection parameters:
  Position = (527.6, 259.3) = 3 32 11.40 -27 52 13.5
  Extent = 1.1" x 0.5", rotation angle = 75 degrees
  Source counts = 17.0 +/- 4.4
  Background counts = 2.0
  Rate = 0.0003 +/- 7e-05

[Tue Jan 17 20:45:45 2012] Off-axis axis estimate = 5.66'
[Tue Jan 17 21:58:42 2012] Using EEF radius (= 1.46 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 21:58:42 2012] Initial guess for spatial extent in simple fitting = 1.46"
[Tue Jan 17 21:58:42 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.014
[Tue Jan 17 21:58:42 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 1.46"
[Tue Jan 17 22:15:47 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass0_src10.ximg exists
[Tue Jan 17 22:15:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08597_pi14-548_cl_pass0_src10.csv
[Tue Jan 17 22:15:47 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass0_src10_1.ximg exists
[Tue Jan 17 22:15:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08597_pi14-548_cl_pass0_src10.csv
[Tue Jan 17 22:15:47 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08597_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08597_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 22:15:47 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Tue Jan 17 22:15:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08597_pi14-548_cl_pass0_tfrozen_src10.csv
[Tue Jan 17 22:15:47 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Jan 17 22:15:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08597_pi14-548_cl_pass0_tfrozen_src10.csv
[Tue Jan 17 22:15:47 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08597_pi14-548_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08597_pi14-548_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 22:27:29 2012] Spatial fit model total counts = 29.825500, observed total counts = 25.000000
[Tue Jan 17 22:27:29 2012] Offset between fit and detection position for source 13 = 1.375460 pixels
[Tue Jan 17 22:27:29 2012] 29.757940 total counts/ 1.923940 bgd. counts: snr = 20.066880
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.375460 pixels
  Position = (527.8, 260.6) = 3 32 11.41 -27 52 13.1
  Extent = 1.9" x 0.8", rotation angle = 84
  Source counts = 27.8 +/- 5.5
  Background counts = 1.9
  Rate = 0.0005 +/- 9e-05
[Tue Jan 17 22:27:29 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 22:27:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 22:27:29 2012] Assessing source extent using major
[Tue Jan 17 22:27:29 2012] Source does appear to be extended
[Tue Jan 17 22:27:29 2012] Computing asymmetry using major and minor axis, asym = 2.55
[Tue Jan 17 22:27:29 2012] Source is asymmetric
[Tue Jan 17 23:32:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 23:32:08 2012] Initial guess for spatial extent in simple fitting = 1.35"
[Tue Jan 17 23:32:08 2012] source mask rpix=2.7, npix_max = 42, mask sum = 42, frac = 0.999
[Tue Jan 17 23:32:08 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 1.35"
[Tue Jan 17 23:46:58 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass1_src10.ximg exists
[Tue Jan 17 23:46:58 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass1_src10_1.ximg exists
[Tue Jan 17 23:46:58 2012] Fit fullrun_ccd3_acisf08597_pi14-548_cl_pass1_src10 appears to have run properly
[Tue Jan 17 23:46:58 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Tue Jan 17 23:46:58 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Jan 17 23:46:58 2012] Fit fullrun_ccd3_acisf08597_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Jan 18 00:02:10 2012] Spatial fit model total counts = 23.943800, observed total counts = 25.000000
[Wed Jan 18 00:02:10 2012] Offset between fit and detection position for source 13 = 0.281791 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.281791 pixels
  Position = (527.9, 260.9) = 3 32 11.40 -27 52 13.0
  Extent = 2.0 (1.3-2.7)" x 0.8 (0.5-1.1)", rotation angle = 91 (77-105) degrees
  Source counts = 23.4 +/- 4.8
  Background counts = 0.0
  Rate = 0.0004 +/- 8e-05
[Wed Jan 18 00:02:10 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 00:02:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 00:02:10 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 00:02:10 2012] Source does appear to be extended
[Wed Jan 18 00:02:10 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.19
[Wed Jan 18 00:31:52 2012] Writing source region out to fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src13_src.reg
[Wed Jan 18 00:31:52 2012] Extracting stamp from image fullrun_ccd3_acisf08597_pi14-548_cl_sm2.00.img.gz, (438, 171) - (618, 351)
[Wed Jan 18 00:31:52 2012] Writing fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src13.gif
[Wed Jan 18 00:37:19 2012] Size of ../../acisf08597/products/events/fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src13_src.evt.gz[events] = 26 counts
[Wed Jan 18 00:37:19 2012] Mean chipx,y = (970.50, 336.54)
[Wed Jan 18 00:37:19 2012] Mean tdetx,y = (4795.46, 4031.50)
[Wed Jan 18 00:37:19 2012] chipx,y range = (947.00-990.00, 317.00-353.00)
[Wed Jan 18 00:37:19 2012] Size of ../../acisf08597/products/events/fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 157 counts
[Wed Jan 18 00:37:20 2012] Not generating rmf since there are only 23 counts
[Wed Jan 18 00:37:20 2012] arf not found, will run specextract
[Wed Jan 18 00:37:41 2012] ../../acisf08597/products/spectra/fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src13.warf not found
[Wed Jan 18 00:37:41 2012] ../../acisf08597/products/spectra/fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src13.wrmf not found
[Wed Jan 18 00:37:41 2012] Removal of ../../acisf08597/products/spectra/fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src13.soff failed
[Wed Jan 18 00:50:50 2012] Spectrum 13 has only 23 counts, deleting rmf
[Wed Jan 18 00:50:50 2012] 187.772
[Wed Jan 18 00:52:20 2012] Updating aperture counts using extracted products
[Wed Jan 18 00:52:20 2012] Error reading totcts from fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src13_src.pi.gz
[Wed Jan 18 00:52:20 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 00:52:20 2012] Using photon index=1.80, rate=0.000394, arf fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src13.arf
[Wed Jan 18 00:52:20 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jan 18 00:52:20 2012] Updating source flux to 5e-15
[Wed Jan 18 00:52:42 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jan 18 00:52:43 2012] acisf08597/analysis//spectral/fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete