[Tue Jan 17 20:45:43 2012] Detection parameters:
  Position = (880.9, 442.5) = 3 31 58.29 -27 50 43.2
  Extent = 1.4" x 1.0", rotation angle = 123 degrees
  Source counts = 50.0 +/- 7.8
  Background counts = 11.0
  Rate = 0.0008 +/- 0.0001

[Tue Jan 17 20:45:45 2012] Off-axis axis estimate = 7.30'
[Tue Jan 17 21:58:42 2012] Using EEF radius (= 2.36 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 21:58:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 21:58:42 2012] Initial guess for spatial extent in simple fitting = 2.36"
[Tue Jan 17 21:58:42 2012] source mask rpix=4.8, npix_max = 112, mask sum = 110, frac = 0.977
[Tue Jan 17 21:58:42 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 2.36"
[Tue Jan 17 22:15:47 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass0_src1.ximg exists
[Tue Jan 17 22:15:47 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Jan 17 22:15:47 2012] Fit fullrun_ccd3_acisf08597_pi14-548_cl_pass0_src1 appears to have run properly
[Tue Jan 17 22:15:47 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Jan 17 22:15:47 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jan 17 22:15:47 2012] Fit fullrun_ccd3_acisf08597_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jan 17 22:27:29 2012] Spatial fit model total counts = 77.980900, observed total counts = 78.000000
[Tue Jan 17 22:27:29 2012] Offset between fit and detection position for source 1 = 0.841141 pixels
[Tue Jan 17 22:27:29 2012] 79.047700 total counts/ 37.079500 bgd. counts: snr = 6.892129
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.841141 pixels
  Position = (881.3, 443.3) = 3 31 58.30 -27 50 43.1
  Extent = 1.7 (1.3-2.2)", rotation angle = 0
  Source counts = 42.0 +/- 8.9
  Background counts = 37.1
  Rate = 0.0007 +/- 0.0001
[Tue Jan 17 22:27:29 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 22:27:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 22:27:29 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 22:27:29 2012] Source does appear to be extended
[Tue Jan 17 22:27:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 23:32:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 23:32:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 23:32:08 2012] Initial guess for spatial extent in simple fitting = 1.66"
[Tue Jan 17 23:32:08 2012] source mask rpix=3.4, npix_max = 60, mask sum = 64, frac = 1.064
[Tue Jan 17 23:32:08 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 1.66"
[Tue Jan 17 23:46:58 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass1_src1.ximg exists
[Tue Jan 17 23:46:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08597_pi14-548_cl_pass1_src1.csv
[Tue Jan 17 23:46:58 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Jan 17 23:46:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08597_pi14-548_cl_pass1_src1.csv
[Tue Jan 17 23:46:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08597_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08597_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 23:46:58 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Jan 17 23:46:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08597_pi14-548_cl_pass1_tfrozen_src1.csv
[Tue Jan 17 23:46:58 2012] fullrun_ccd3_acisf08597_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jan 17 23:46:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08597_pi14-548_cl_pass1_tfrozen_src1.csv
[Tue Jan 17 23:46:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08597_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08597_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 00:02:10 2012] Spatial fit model total counts = 47.865200, observed total counts = 58.000000
[Wed Jan 18 00:02:10 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jan 18 00:02:10 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 00:02:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 00:02:10 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 00:02:10 2012] Source does appear to be extended
[Wed Jan 18 00:02:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 00:31:52 2012] Writing source region out to fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src1_src.reg
[Wed Jan 18 00:31:52 2012] Extracting stamp from image fullrun_ccd3_acisf08597_pi14-548_cl_sm2.00.img.gz, (805, 367) - (957, 519)
[Wed Jan 18 00:31:52 2012] Writing fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src1.gif
[Wed Jan 18 00:32:29 2012] Size of ../../acisf08597/products/events/fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src1_src.evt.gz[events] = 55 counts
[Wed Jan 18 00:32:29 2012] Mean chipx,y = (591.91, 209.71)
[Wed Jan 18 00:32:29 2012] Mean tdetx,y = (4922.29, 3652.91)
[Wed Jan 18 00:32:29 2012] chipx,y range = (565.00-613.00, 183.00-235.00)
[Wed Jan 18 00:32:29 2012] Size of ../../acisf08597/products/events/fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 131 counts
[Wed Jan 18 00:32:30 2012] Not generating rmf since there are only 41 counts
[Wed Jan 18 00:32:30 2012] arf not found, will run specextract
[Wed Jan 18 00:32:47 2012] ../../acisf08597/products/spectra/fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src1.warf not found
[Wed Jan 18 00:32:47 2012] ../../acisf08597/products/spectra/fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src1.wrmf not found
[Wed Jan 18 00:32:47 2012] Removal of ../../acisf08597/products/spectra/fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src1.soff failed
[Wed Jan 18 00:50:50 2012] Spectrum 1 has only 42 counts, deleting rmf
[Wed Jan 18 00:50:50 2012] 175.77
[Wed Jan 18 00:52:20 2012] Updating aperture counts using extracted products
[Wed Jan 18 00:52:20 2012] Error reading totcts from fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Jan 18 00:52:20 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 00:52:20 2012] Using photon index=1.80, rate=0.000708, arf fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src1.arf
[Wed Jan 18 00:52:20 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jan 18 00:52:20 2012] Updating source flux to 9.7e-15
[Wed Jan 18 00:52:42 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Wed Jan 18 00:52:42 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jan 18 00:52:43 2012] acisf08597/analysis//spectral/fullrun_ccd3_acisf08597_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete