[Tue Jan 17 20:45:40 2012] Detection parameters:
  Position = (857.7, 914.3) = 3 32 26.98 -27 41 5.4
  Extent = 2.3" x 1.6", rotation angle = 156 degrees
  Source counts = 604.0 +/- 25.6
  Background counts = 49.0
  Rate = 0.01 +/- 0.0004

[Tue Jan 17 20:45:42 2012] Off-axis axis estimate = 7.10'
[Tue Jan 17 21:24:24 2012] Using EEF radius (= 2.24 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 21:24:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 21:24:24 2012] Initial guess for spatial extent in simple fitting = 2.24"
[Tue Jan 17 21:24:24 2012] source mask rpix=4.5, npix_max = 102, mask sum = 100, frac = 0.980
[Tue Jan 17 21:24:24 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 2.24"
[Tue Jan 17 21:58:41 2012] fullrun_ccd2_acisf08597_pi14-548_cl_pass0_src1.ximg exists
[Tue Jan 17 21:58:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08597_pi14-548_cl_pass0_src1.csv
[Tue Jan 17 21:58:41 2012] fullrun_ccd2_acisf08597_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Jan 17 21:58:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08597_pi14-548_cl_pass0_src1.csv
[Tue Jan 17 21:58:41 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08597_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08597_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 21:58:42 2012] fullrun_ccd2_acisf08597_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Jan 17 21:58:42 2012] fullrun_ccd2_acisf08597_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jan 17 21:58:42 2012] Fit fullrun_ccd2_acisf08597_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jan 17 22:27:27 2012] Spatial fit model total counts = 657.999000, observed total counts = 658.000000
[Tue Jan 17 22:27:27 2012] Offset between fit and detection position for source 3 = 0.620341 pixels
[Tue Jan 17 22:27:27 2012] 657.696000 total counts/ 114.353000 bgd. counts: snr = 50.810129
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.620341 pixels
  Position = (858.1, 914.8) = 3 32 26.98 -27 41 5.5
  Extent = 2.0 (1.8-2.1)", rotation angle = 0
  Source counts = 543.3 +/- 25.6
  Background counts = 114.4
  Rate = 0.009 +/- 0.0004
[Tue Jan 17 22:27:27 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 22:27:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 22:27:27 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 22:27:27 2012] Source does appear to be extended
[Tue Jan 17 22:27:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 23:02:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 23:02:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 23:02:54 2012] Initial guess for spatial extent in simple fitting = 1.98"
[Tue Jan 17 23:02:54 2012] source mask rpix=4.0, npix_max = 81, mask sum = 81, frac = 0.989
[Tue Jan 17 23:02:54 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 1.98"
[Tue Jan 17 23:32:07 2012] fullrun_ccd2_acisf08597_pi14-548_cl_pass1_src1.ximg exists
[Tue Jan 17 23:32:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08597_pi14-548_cl_pass1_src1.csv
[Tue Jan 17 23:32:07 2012] fullrun_ccd2_acisf08597_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Jan 17 23:32:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08597_pi14-548_cl_pass1_src1.csv
[Tue Jan 17 23:32:07 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08597_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08597_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 23:32:08 2012] fullrun_ccd2_acisf08597_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Jan 17 23:32:08 2012] fullrun_ccd2_acisf08597_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jan 17 23:32:08 2012] Fit fullrun_ccd2_acisf08597_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jan 18 00:02:08 2012] Spatial fit model total counts = 639.999000, observed total counts = 640.000000
[Wed Jan 18 00:02:08 2012] Offset between fit and detection position for source 3 = 0.112660 pixels
[Wed Jan 18 00:02:08 2012] 640.010000 total counts/ 111.381000 bgd. counts: snr = 50.089354
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.112660 pixels
  Position = (858.2, 914.7) = 3 32 26.98 -27 41 5.5
  Extent = 1.9 (1.8-2.1)", rotation angle = 0
  Source counts = 528.6 +/- 25.3
  Background counts = 111.4
  Rate = 0.009 +/- 0.0004
[Wed Jan 18 00:02:08 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 00:02:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 00:02:08 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 00:02:08 2012] Source does appear to be extended
[Wed Jan 18 00:02:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 00:17:02 2012] Writing source region out to fullrun_ccd2_acisf08597_pi14-548_pass1_cl_src3_src.reg
[Wed Jan 18 00:17:02 2012] Extracting stamp from image fullrun_ccd2_acisf08597_pi14-548_cl_sm2.00.img.gz, (771, 827) - (946, 1002)
[Wed Jan 18 00:17:02 2012] Writing fullrun_ccd2_acisf08597_pi14-548_pass1_cl_src3.gif
[Wed Jan 18 00:17:05 2012] Size of ../../acisf08597/products/events/fullrun_ccd2_acisf08597_pi14-548_pass1_cl_src3_src.evt.gz[events] = 623 counts
[Wed Jan 18 00:17:05 2012] Mean chipx,y = (736.39, 485.17)
[Wed Jan 18 00:17:05 2012] Mean tdetx,y = (3546.17, 3349.61)
[Wed Jan 18 00:17:05 2012] chipx,y range = (710.00-765.00, 455.00-514.00)
[Wed Jan 18 00:17:05 2012] Size of ../../acisf08597/products/events/fullrun_ccd2_acisf08597_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 183 counts
[Wed Jan 18 00:17:06 2012] rmf not found, will run specextract
[Wed Jan 18 00:17:06 2012] arf not found, will run specextract
[Wed Jan 18 00:17:31 2012] ../../acisf08597/products/spectra/fullrun_ccd2_acisf08597_pi14-548_pass1_cl_src3.warf not found
[Wed Jan 18 00:17:31 2012] ../../acisf08597/products/spectra/fullrun_ccd2_acisf08597_pi14-548_pass1_cl_src3.wrmf not found
[Wed Jan 18 00:17:31 2012] Removal of ../../acisf08597/products/spectra/fullrun_ccd2_acisf08597_pi14-548_pass1_cl_src3.soff failed
[Wed Jan 18 00:31:51 2012] Keeping rmf generated by specextract
[Wed Jan 18 00:31:51 2012] 169.589
[Wed Jan 18 00:52:19 2012] Updating aperture counts using extracted products
[Wed Jan 18 00:52:19 2012] Error reading totcts from fullrun_ccd2_acisf08597_pi14-548_pass1_cl_src3_src.pi.gz
[Wed Jan 18 00:52:19 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 00:52:19 2012] Using photon index=1.80, rate=0.00892, arf fullrun_ccd2_acisf08597_pi14-548_pass1_cl_src3.arf
[Wed Jan 18 00:52:19 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jan 18 00:52:19 2012] Updating source flux to 1.2e-13
[Wed Jan 18 00:52:41 2012] Reading fit data from acisf08597/analysis//spectral/fullrun_ccd2_acisf08597_pi14-548_pass1_cl_src3_pl.csv
[Wed Jan 18 00:52:41 2012] Spectral fit parameter nH value = 1.1161e+14
[Wed Jan 18 00:52:41 2012] Spectral fit parameter PhoIndex value = 2.06519
[Wed Jan 18 00:52:41 2012] Failed to get F(0.3-8.0) from acisf08597/analysis//spectral/fullrun_ccd2_acisf08597_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed Jan 18 00:52:41 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 00:52:41 2012] Using Nh = 1.1e+14, photon index=2.07, rate=0.00892, arf fullrun_ccd2_acisf08597_pi14-548_pass1_cl_src3.arf
[Wed Jan 18 00:52:41 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jan 18 00:52:41 2012] Updating source flux to 1.2e-13