[Tue Jan 17 20:45:37 2012] Detection parameters:
  Position = (524.7, 432.6) = 3 32 38.93 -27 57 0.7
  Extent = 3.9" x 2.7", rotation angle = 83 degrees
  Source counts = 137.4 +/- 13.3
  Background counts = 39.6
  Rate = 0.002 +/- 0.0002

[Tue Jan 17 20:45:38 2012] Off-axis axis estimate = 9.10'
[Tue Jan 17 21:09:28 2012] Using EEF radius (= 3.66 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 21:09:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 21:09:28 2012] Initial guess for spatial extent in simple fitting = 3.66"
[Tue Jan 17 21:09:28 2012] source mask rpix=7.4, npix_max = 252, mask sum = 256, frac = 1.016
[Tue Jan 17 21:09:28 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 3.66"
[Tue Jan 17 21:24:24 2012] fullrun_ccd1_acisf08597_pi14-548_cl_pass0_src1.ximg exists
[Tue Jan 17 21:24:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08597_pi14-548_cl_pass0_src1.csv
[Tue Jan 17 21:24:24 2012] fullrun_ccd1_acisf08597_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Jan 17 21:24:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08597_pi14-548_cl_pass0_src1.csv
[Tue Jan 17 21:24:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf08597_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf08597_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 21:24:24 2012] fullrun_ccd1_acisf08597_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Jan 17 21:24:24 2012] fullrun_ccd1_acisf08597_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jan 17 21:24:24 2012] Fit fullrun_ccd1_acisf08597_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jan 17 22:27:24 2012] Spatial fit model total counts = 203.705000, observed total counts = 204.000000
[Tue Jan 17 22:27:24 2012] Offset between fit and detection position for source 1 = 1.567095 pixels
[Tue Jan 17 22:27:24 2012] 203.302700 total counts/ 71.093700 bgd. counts: snr = 15.679978
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.567095 pixels
  Position = (525.8, 433.6) = 3 32 38.91 -27 57 0.5
  Extent = 3.0 (2.6-3.6)", rotation angle = 0
  Source counts = 132.2 +/- 14.3
  Background counts = 71.1
  Rate = 0.002 +/- 0.0002
[Tue Jan 17 22:27:24 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 22:27:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 22:27:24 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 22:27:24 2012] Source does appear to be extended
[Tue Jan 17 22:27:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 22:48:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 22:48:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 22:48:10 2012] Initial guess for spatial extent in simple fitting = 3.01"
[Tue Jan 17 22:48:10 2012] source mask rpix=6.1, npix_max = 175, mask sum = 169, frac = 0.964
[Tue Jan 17 22:48:10 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 3.01"
[Tue Jan 17 23:02:54 2012] fullrun_ccd1_acisf08597_pi14-548_cl_pass1_src1.ximg exists
[Tue Jan 17 23:02:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08597_pi14-548_cl_pass1_src1.csv
[Tue Jan 17 23:02:54 2012] fullrun_ccd1_acisf08597_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Jan 17 23:02:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08597_pi14-548_cl_pass1_src1.csv
[Tue Jan 17 23:02:54 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf08597_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf08597_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 23:02:54 2012] fullrun_ccd1_acisf08597_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Jan 17 23:02:54 2012] fullrun_ccd1_acisf08597_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jan 17 23:02:54 2012] Fit fullrun_ccd1_acisf08597_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jan 18 00:02:05 2012] Spatial fit model total counts = 185.787000, observed total counts = 186.000000
[Wed Jan 18 00:02:05 2012] Offset between fit and detection position for source 1 = 0.185640 pixels
[Wed Jan 18 00:02:05 2012] 185.065700 total counts/ 61.384700 bgd. counts: snr = 15.786030
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.185640 pixels
  Position = (526.0, 433.7) = 3 32 38.90 -27 57 0.4
  Extent = 2.9 (2.4-3.5)", rotation angle = 0
  Source counts = 123.7 +/- 13.6
  Background counts = 61.4
  Rate = 0.002 +/- 0.0002
[Wed Jan 18 00:02:05 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 00:02:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 00:02:05 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 00:02:05 2012] Source does appear to be extended
[Wed Jan 18 00:02:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 00:09:45 2012] Writing source region out to fullrun_ccd1_acisf08597_pi14-548_pass1_cl_src1_src.reg
[Wed Jan 18 00:09:45 2012] Extracting stamp from image fullrun_ccd1_acisf08597_pi14-548_cl_sm2.00.img.gz, (394, 302) - (658, 565)
[Wed Jan 18 00:09:45 2012] Writing fullrun_ccd1_acisf08597_pi14-548_pass1_cl_src1.gif
[Wed Jan 18 00:09:47 2012] Size of ../../acisf08597/products/events/fullrun_ccd1_acisf08597_pi14-548_pass1_cl_src1_src.evt.gz[events] = 173 counts
[Wed Jan 18 00:09:47 2012] Mean chipx,y = (862.81, 459.28)
[Wed Jan 18 00:09:47 2012] Mean tdetx,y = (4672.72, 4969.81)
[Wed Jan 18 00:09:47 2012] chipx,y range = (837.00-898.00, 423.00-493.00)
[Wed Jan 18 00:09:47 2012] Size of ../../acisf08597/products/events/fullrun_ccd1_acisf08597_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 408 counts
[Wed Jan 18 00:09:48 2012] rmf not found, will run specextract
[Wed Jan 18 00:09:48 2012] arf not found, will run specextract
[Wed Jan 18 00:10:09 2012] ../../acisf08597/products/spectra/fullrun_ccd1_acisf08597_pi14-548_pass1_cl_src1.warf not found
[Wed Jan 18 00:10:09 2012] ../../acisf08597/products/spectra/fullrun_ccd1_acisf08597_pi14-548_pass1_cl_src1.wrmf not found
[Wed Jan 18 00:10:09 2012] Removal of ../../acisf08597/products/spectra/fullrun_ccd1_acisf08597_pi14-548_pass1_cl_src1.soff failed
[Wed Jan 18 00:17:02 2012] Keeping rmf generated by specextract
[Wed Jan 18 00:17:02 2012] 170.209
[Wed Jan 18 00:52:19 2012] Updating aperture counts using extracted products
[Wed Jan 18 00:52:19 2012] Error reading totcts from fullrun_ccd1_acisf08597_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Jan 18 00:52:19 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 00:52:19 2012] Using photon index=1.80, rate=0.00209, arf fullrun_ccd1_acisf08597_pi14-548_pass1_cl_src1.arf
[Wed Jan 18 00:52:19 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jan 18 00:52:19 2012] Updating source flux to 2.9e-14
[Wed Jan 18 00:52:32 2012] Reading fit data from acisf08597/analysis//spectral/fullrun_ccd1_acisf08597_pi14-548_pass1_cl_src1_pl.csv
[Wed Jan 18 00:52:32 2012] Spectral fit parameter nH value = 2.53701e+22
[Wed Jan 18 00:52:32 2012] Spectral fit parameter PhoIndex value = 1.84413
[Wed Jan 18 00:52:32 2012] Failed to get F(0.3-8.0) from acisf08597/analysis//spectral/fullrun_ccd1_acisf08597_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jan 18 00:52:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 00:52:32 2012] Using Nh = 2.5e+22, photon index=1.84, rate=0.00209, arf fullrun_ccd1_acisf08597_pi14-548_pass1_cl_src1.arf
[Wed Jan 18 00:52:32 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Jan 18 00:52:32 2012] Updating source flux to 4.5e-14