[Thu Oct  6 02:47:50 2011] Detection parameters:
  Position = (536.2, 246.0) = 3 44 28.50 32 7 22.5
  Extent = 0.6" x 0.5", rotation angle = 53 degrees
  Source counts = 327.5 +/- 18.2
  Background counts = 4.5
  Rate = 0.007 +/- 0.0004

[Thu Oct  6 02:48:03 2011] Off-axis axis estimate = 3.44'
[Thu Oct  6 02:49:35 2011] Using EEF radius (= 0.68 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 02:49:35 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Thu Oct  6 02:49:35 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.132
[Thu Oct  6 02:49:35 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 0.68"
[Thu Oct  6 02:49:37 2011] fullrun_ccd3_acisf08584_pi14-548_cl_pass0_src15.ximg exists
[Thu Oct  6 02:49:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08584_pi14-548_cl_pass0_src15.csv
[Thu Oct  6 02:49:37 2011] fullrun_ccd3_acisf08584_pi14-548_cl_pass0_src15_1.ximg exists
[Thu Oct  6 02:49:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08584_pi14-548_cl_pass0_src15.csv
[Thu Oct  6 02:49:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08584_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08584_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 02:49:40 2011] fullrun_ccd3_acisf08584_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Thu Oct  6 02:49:40 2011] fullrun_ccd3_acisf08584_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Thu Oct  6 02:49:40 2011] Fit fullrun_ccd3_acisf08584_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Thu Oct  6 02:50:11 2011] Spatial fit model total counts = 334.434000, observed total counts = 334.000000
[Thu Oct  6 02:50:11 2011] Offset between fit and detection position for source 22 = 0.649529 pixels
[Thu Oct  6 02:50:11 2011] 334.853800 total counts/ 13.205800 bgd. counts: snr = 88.511255
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.649529 pixels
  Position = (536.7, 246.5) = 3 44 28.50 32 7 22.4
  Extent = 0.7 (0.6-0.7)", rotation angle = 0
  Source counts = 321.6 +/- 18.3
  Background counts = 13.2
  Rate = 0.006 +/- 0.0004
[Thu Oct  6 02:50:11 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 02:50:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 02:50:11 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 02:50:11 2011] Source does appear to be extended
[Thu Oct  6 02:50:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 02:50:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 02:50:50 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Thu Oct  6 02:50:50 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.853
[Thu Oct  6 02:50:50 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.68"
[Thu Oct  6 02:50:51 2011] fullrun_ccd3_acisf08584_pi14-548_cl_pass1_src15.ximg exists
[Thu Oct  6 02:50:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08584_pi14-548_cl_pass1_src15.csv
[Thu Oct  6 02:50:51 2011] fullrun_ccd3_acisf08584_pi14-548_cl_pass1_src15_1.ximg exists
[Thu Oct  6 02:50:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08584_pi14-548_cl_pass1_src15.csv
[Thu Oct  6 02:50:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08584_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08584_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 02:50:53 2011] fullrun_ccd3_acisf08584_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Thu Oct  6 02:50:53 2011] fullrun_ccd3_acisf08584_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Thu Oct  6 02:50:53 2011] Fit fullrun_ccd3_acisf08584_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Thu Oct  6 02:51:21 2011] Spatial fit model total counts = 335.968000, observed total counts = 334.000000
[Thu Oct  6 02:51:21 2011] Offset between fit and detection position for source 22 = 0.005187 pixels
[Thu Oct  6 02:51:21 2011] 336.419100 total counts/ 13.609100 bgd. counts: snr = 87.504881
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.005187 pixels
  Position = (536.7, 246.5) = 3 44 28.50 32 7 22.4
  Extent = 0.7 (0.6-0.7)", rotation angle = 0
  Source counts = 322.8 +/- 18.3
  Background counts = 13.6
  Rate = 0.007 +/- 0.0004
[Thu Oct  6 02:51:21 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 02:51:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 02:51:21 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 02:51:21 2011] Source does appear to be extended
[Thu Oct  6 02:51:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 02:59:00 2011] Not overwriting source region fullrun_ccd3_acisf08584_pi14-548_pass1_cl_src22_src.reg
[Thu Oct  6 02:59:00 2011] Extracting stamp from image fullrun_ccd3_acisf08584_pi14-548_cl_sm2.00.img.gz, (506, 216) - (568, 277)
[Thu Oct  6 02:59:00 2011] Writing fullrun_ccd3_acisf08584_pi14-548_pass1_cl_src22.gif
[Thu Oct  6 03:00:29 2011] ../../acisf08584/products/events/fullrun_ccd3_acisf08584_pi14-548_pass1_cl_src22_src.evt and ../../acisf08584/products/events/fullrun_ccd3_acisf08584_pi14-548_pass1_cl_src22_bgd.evt exist, delete to re-create
[Thu Oct  6 03:00:29 2011] Size of ../../acisf08584/products/events/fullrun_ccd3_acisf08584_pi14-548_pass1_cl_src22_src.evt.gz[events] = 327 counts
[Thu Oct  6 03:00:29 2011] Mean chipx,y = (541.73, 930.62)
[Thu Oct  6 03:00:29 2011] Mean tdetx,y = (4201.38, 3602.73)
[Thu Oct  6 03:00:29 2011] chipx,y range = (521.00-559.00, 911.00-950.00)
[Thu Oct  6 03:00:30 2011] Size of ../../acisf08584/products/events/fullrun_ccd3_acisf08584_pi14-548_pass1_cl_src22_bgd.evt.gz[events] = 39 counts
[Thu Oct  6 03:00:30 2011] ../../acisf08584/products/images/fullrun_ccd3_acisf08584_pi14-548_pass1_cl_src22_src.img and ../../acisf08584/products/images/fullrun_ccd3_acisf08584_pi14-548_pass1_cl_src22_bgd.img exist, delete to re-create
[Thu Oct  6 03:00:30 2011] ../../acisf08584/products/spectra/fullrun_ccd3_acisf08584_pi14-548_pass1_cl_src22_src.pi and ../../acisf08584/products/spectra/fullrun_ccd3_acisf08584_pi14-548_pass1_cl_src22_bgd.pi exist, delete to re-create
[Thu Oct  6 03:00:34 2011] ../../acisf08584/products/lightcurves/fullrun_ccd3_acisf08584_pi14-548_pass1_cl_src22_src.lc and ../../acisf08584/products/lightcurves/fullrun_ccd3_acisf08584_pi14-548_pass1_cl_src22_bgd.lc exist, delete to re-create
[Thu Oct  6 03:08:12 2011] Keeping rmf generated by specextract
[Thu Oct  6 03:08:12 2011] 183.682
[Thu Oct  6 03:08:48 2011] Updating aperture counts using extracted products
[Thu Oct  6 03:08:48 2011] Error reading totcts from fullrun_ccd3_acisf08584_pi14-548_pass1_cl_src22_src.pi.gz
[Thu Oct  6 03:08:49 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 03:08:49 2011] Using photon index=1.80, rate=0.00652, arf fullrun_ccd3_acisf08584_pi14-548_pass1_cl_src22.arf
[Thu Oct  6 03:08:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 03:08:49 2011] Updating source flux to 7.9e-14