[Thu Oct  6 02:47:41 2011] Detection parameters:
  Position = (451.5, 817.1) = 3 44 44.73 32 4 2.6
  Extent = 1.8" x 1.2", rotation angle = 82 degrees
  Source counts = 24441.4 +/- 159.3
  Background counts = 946.6
  Rate = 0.5 +/- 0.003

[Thu Oct  6 02:47:47 2011] Off-axis axis estimate = 6.59'
[Thu Oct  6 02:49:31 2011] Using EEF radius (= 1.94 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 02:49:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 02:49:31 2011] Initial guess for spatial extent in simple fitting = 1.94"
[Thu Oct  6 02:49:31 2011] source mask rpix=3.9, npix_max = 79, mask sum = 81, frac = 1.024
[Thu Oct  6 02:49:31 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.94"
[Thu Oct  6 02:49:34 2011] fullrun_ccd2_acisf08584_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct  6 02:49:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08584_pi14-548_cl_pass0_src1.csv
[Thu Oct  6 02:49:34 2011] fullrun_ccd2_acisf08584_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct  6 02:49:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08584_pi14-548_cl_pass0_src1.csv
[Thu Oct  6 02:49:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08584_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08584_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 02:49:34 2011] fullrun_ccd2_acisf08584_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct  6 02:49:34 2011] fullrun_ccd2_acisf08584_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct  6 02:49:34 2011] Fit fullrun_ccd2_acisf08584_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct  6 02:50:00 2011] Spatial fit model total counts = 25237.400000, observed total counts = 25232.000000
[Thu Oct  6 02:50:00 2011] Offset between fit and detection position for source 6 = 0.543193 pixels
[Thu Oct  6 02:50:00 2011] 25303.920000 total counts/ 2250.220000 bgd. counts: snr = 485.990911
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.543193 pixels
  Position = (451.9, 817.5) = 3 44 44.74 32 4 2.5
  Extent = 2.0 (1.9-2.0)", rotation angle = 0
  Source counts = 23053.7 +/- 159.1
  Background counts = 2250.2
  Rate = 0.5 +/- 0.003
[Thu Oct  6 02:50:00 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 02:50:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 02:50:00 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 02:50:00 2011] Source does appear to be extended
[Thu Oct  6 02:50:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 02:50:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 02:50:47 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 02:50:47 2011] Initial guess for spatial extent in simple fitting = 1.95"
[Thu Oct  6 02:50:47 2011] source mask rpix=4.0, npix_max = 79, mask sum = 81, frac = 1.015
[Thu Oct  6 02:50:47 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.95"
[Thu Oct  6 02:50:49 2011] fullrun_ccd2_acisf08584_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct  6 02:50:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08584_pi14-548_cl_pass1_src1.csv
[Thu Oct  6 02:50:49 2011] fullrun_ccd2_acisf08584_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct  6 02:50:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08584_pi14-548_cl_pass1_src1.csv
[Thu Oct  6 02:50:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08584_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08584_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 02:50:49 2011] fullrun_ccd2_acisf08584_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct  6 02:50:49 2011] fullrun_ccd2_acisf08584_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct  6 02:50:49 2011] Fit fullrun_ccd2_acisf08584_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct  6 02:51:10 2011] Spatial fit model total counts = 25249.100000, observed total counts = 25239.000000
[Thu Oct  6 02:51:10 2011] Offset between fit and detection position for source 6 = 0.019103 pixels
[Thu Oct  6 02:51:10 2011] 25303.080000 total counts/ 2025.380000 bgd. counts: snr = 517.233694
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.019103 pixels
  Position = (451.9, 817.5) = 3 44 44.74 32 4 2.5
  Extent = 2.0 (2.0-2.0)", rotation angle = 0
  Source counts = 23277.7 +/- 159.1
  Background counts = 2025.4
  Rate = 0.5 +/- 0.003
[Thu Oct  6 02:51:10 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 02:51:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 02:51:10 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 02:51:10 2011] Source does appear to be extended
[Thu Oct  6 02:51:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 02:56:46 2011] Not overwriting source region fullrun_ccd2_acisf08584_pi14-548_pass1_cl_src6_src.reg
[Thu Oct  6 02:56:46 2011] Extracting stamp from image fullrun_ccd2_acisf08584_pi14-548_cl_sm2.00.img.gz, (362, 727) - (542, 908)
[Thu Oct  6 02:56:46 2011] Writing fullrun_ccd2_acisf08584_pi14-548_pass1_cl_src6.gif
[Thu Oct  6 02:56:47 2011] ../../acisf08584/products/events/fullrun_ccd2_acisf08584_pi14-548_pass1_cl_src6_src.evt and ../../acisf08584/products/events/fullrun_ccd2_acisf08584_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Thu Oct  6 02:56:47 2011] Size of ../../acisf08584/products/events/fullrun_ccd2_acisf08584_pi14-548_pass1_cl_src6_src.evt.gz[events] = 25089 counts
[Thu Oct  6 02:56:47 2011] Mean chipx,y = (753.27, 618.35)
[Thu Oct  6 02:56:47 2011] Mean tdetx,y = (3679.35, 3332.73)
[Thu Oct  6 02:56:47 2011] chipx,y range = (725.00-785.00, 585.00-651.00)
[Thu Oct  6 02:56:47 2011] Size of ../../acisf08584/products/events/fullrun_ccd2_acisf08584_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 607 counts
[Thu Oct  6 02:56:47 2011] ../../acisf08584/products/images/fullrun_ccd2_acisf08584_pi14-548_pass1_cl_src6_src.img and ../../acisf08584/products/images/fullrun_ccd2_acisf08584_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Thu Oct  6 02:56:47 2011] ../../acisf08584/products/spectra/fullrun_ccd2_acisf08584_pi14-548_pass1_cl_src6_src.pi and ../../acisf08584/products/spectra/fullrun_ccd2_acisf08584_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Thu Oct  6 02:56:54 2011] ../../acisf08584/products/lightcurves/fullrun_ccd2_acisf08584_pi14-548_pass1_cl_src6_src.lc and ../../acisf08584/products/lightcurves/fullrun_ccd2_acisf08584_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Thu Oct  6 02:58:58 2011] Keeping rmf generated by specextract
[Thu Oct  6 02:58:58 2011] 156.444
[Thu Oct  6 03:08:47 2011] Updating aperture counts using extracted products
[Thu Oct  6 03:08:47 2011] Error reading totcts from fullrun_ccd2_acisf08584_pi14-548_pass1_cl_src6_src.pi.gz
[Thu Oct  6 03:08:47 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 03:08:47 2011] Using photon index=1.80, rate=0.47, arf fullrun_ccd2_acisf08584_pi14-548_pass1_cl_src6.arf
[Thu Oct  6 03:08:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 03:08:47 2011] Updating source flux to 6.7e-12
[Thu Oct  6 03:10:15 2011] Reading fit data from acisf08584/analysis//spectral/fullrun_ccd2_acisf08584_pi14-548_pass1_cl_src6_pl.csv
[Thu Oct  6 03:10:15 2011] Spectral fit parameter nH value = 5.7622e+21
[Thu Oct  6 03:10:15 2011] Spectral fit parameter PhoIndex value = 1.75132
[Thu Oct  6 03:10:15 2011] Failed to get F(0.3-8.0) from acisf08584/analysis//spectral/fullrun_ccd2_acisf08584_pi14-548_pass1_cl_src6_pl.csv, possibly due to different flux energy range selected
[Thu Oct  6 03:10:15 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 03:10:15 2011] Using Nh = 5.8e+21, photon index=1.75, rate=0.47, arf fullrun_ccd2_acisf08584_pi14-548_pass1_cl_src6.arf
[Thu Oct  6 03:10:15 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 03:10:15 2011] Updating source flux to 7.7e-12