[Mon Oct 17 06:38:06 2011] Detection parameters:
  Position = (692.4, 772.2) = 22 15 50.45 -17 29 46.8
  Extent = 1.7" x 1.4", rotation angle = 118 degrees
  Source counts = 133.0 +/- 12.3
  Background counts = 19.0
  Rate = 0.003 +/- 0.0003

[Mon Oct 17 06:38:07 2011] Off-axis axis estimate = 7.30'
[Mon Oct 17 06:38:53 2011] Using EEF radius (= 2.36 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 06:38:53 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 06:38:53 2011] Initial guess for spatial extent in simple fitting = 2.36"
[Mon Oct 17 06:38:53 2011] source mask rpix=4.8, npix_max = 112, mask sum = 110, frac = 0.977
[Mon Oct 17 06:38:53 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.36"
[Mon Oct 17 06:38:54 2011] fullrun_ccd6_acisf08566_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 17 06:38:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf08566_pi14-548_cl_pass0_src1.csv
[Mon Oct 17 06:38:54 2011] fullrun_ccd6_acisf08566_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 17 06:38:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf08566_pi14-548_cl_pass0_src1.csv
[Mon Oct 17 06:38:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf08566_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf08566_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 06:38:54 2011] fullrun_ccd6_acisf08566_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 17 06:38:54 2011] fullrun_ccd6_acisf08566_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 17 06:38:54 2011] Fit fullrun_ccd6_acisf08566_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 17 06:39:03 2011] Spatial fit model total counts = 179.478000, observed total counts = 180.000000
[Mon Oct 17 06:39:03 2011] Offset between fit and detection position for source 1 = 0.648028 pixels
[Mon Oct 17 06:39:03 2011] 179.566900 total counts/ 62.158900 bgd. counts: snr = 14.891760
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.648028 pixels
  Position = (692.9, 772.6) = 22 15 50.45 -17 29 46.9
  Extent = 2.3 (1.9-2.7)", rotation angle = 0
  Source counts = 117.4 +/- 13.4
  Background counts = 62.2
  Rate = 0.003 +/- 0.0003
[Mon Oct 17 06:39:03 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 06:39:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 06:39:03 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 06:39:03 2011] Source does appear to be extended
[Mon Oct 17 06:39:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 06:39:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 06:39:23 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 06:39:23 2011] Initial guess for spatial extent in simple fitting = 2.26"
[Mon Oct 17 06:39:23 2011] source mask rpix=4.6, npix_max = 103, mask sum = 110, frac = 1.058
[Mon Oct 17 06:39:23 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.26"
[Mon Oct 17 06:39:23 2011] fullrun_ccd6_acisf08566_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 17 06:39:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf08566_pi14-548_cl_pass1_src1.csv
[Mon Oct 17 06:39:23 2011] fullrun_ccd6_acisf08566_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 17 06:39:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf08566_pi14-548_cl_pass1_src1.csv
[Mon Oct 17 06:39:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf08566_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf08566_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 06:39:23 2011] fullrun_ccd6_acisf08566_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 17 06:39:23 2011] fullrun_ccd6_acisf08566_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 17 06:39:23 2011] Fit fullrun_ccd6_acisf08566_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 17 06:39:31 2011] Spatial fit model total counts = 173.000000, observed total counts = 173.000000
[Mon Oct 17 06:39:31 2011] Offset between fit and detection position for source 1 = 0.023233 pixels
[Mon Oct 17 06:39:31 2011] 173.099300 total counts/ 52.480300 bgd. counts: snr = 16.650128
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.023233 pixels
  Position = (692.9, 772.6) = 22 15 50.45 -17 29 46.9
  Extent = 2.3 (2.0-2.8)", rotation angle = 0
  Source counts = 120.6 +/- 13.2
  Background counts = 52.5
  Rate = 0.003 +/- 0.0003
[Mon Oct 17 06:39:31 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 06:39:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 06:39:31 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 06:39:31 2011] Source does appear to be extended
[Mon Oct 17 06:39:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 06:40:21 2011] Not overwriting source region fullrun_ccd6_acisf08566_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 17 06:40:21 2011] Extracting stamp from image fullrun_ccd6_acisf08566_pi14-548_cl_sm2.00.img.gz, (586, 666) - (800, 879)
[Mon Oct 17 06:40:21 2011] Writing fullrun_ccd6_acisf08566_pi14-548_pass1_cl_src1.gif
[Mon Oct 17 06:40:23 2011] ../../acisf08566/products/events/fullrun_ccd6_acisf08566_pi14-548_pass1_cl_src1_src.evt and ../../acisf08566/products/events/fullrun_ccd6_acisf08566_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 17 06:40:23 2011] Size of ../../acisf08566/products/events/fullrun_ccd6_acisf08566_pi14-548_pass1_cl_src1_src.evt.gz[events] = 161 counts
[Mon Oct 17 06:40:23 2011] Mean chipx,y = (344.42, 479.07)
[Mon Oct 17 06:40:23 2011] Mean tdetx,y = (3219.42, 2181.07)
[Mon Oct 17 06:40:23 2011] chipx,y range = (318.00-376.00, 454.00-503.00)
[Mon Oct 17 06:40:23 2011] Size of ../../acisf08566/products/events/fullrun_ccd6_acisf08566_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 206 counts
[Mon Oct 17 06:40:23 2011] ../../acisf08566/products/images/fullrun_ccd6_acisf08566_pi14-548_pass1_cl_src1_src.img and ../../acisf08566/products/images/fullrun_ccd6_acisf08566_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 17 06:40:23 2011] ../../acisf08566/products/spectra/fullrun_ccd6_acisf08566_pi14-548_pass1_cl_src1_src.pi and ../../acisf08566/products/spectra/fullrun_ccd6_acisf08566_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct 17 06:40:25 2011] ../../acisf08566/products/lightcurves/fullrun_ccd6_acisf08566_pi14-548_pass1_cl_src1_src.lc and ../../acisf08566/products/lightcurves/fullrun_ccd6_acisf08566_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 17 06:41:11 2011] Keeping rmf generated by specextract
[Mon Oct 17 06:41:11 2011] 180.512
[Mon Oct 17 06:42:28 2011] Updating aperture counts using extracted products
[Mon Oct 17 06:42:28 2011] Error reading totcts from fullrun_ccd6_acisf08566_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct 17 06:42:28 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 06:42:28 2011] Using photon index=1.80, rate=0.00284, arf fullrun_ccd6_acisf08566_pi14-548_pass1_cl_src1.arf
[Mon Oct 17 06:42:28 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 06:42:28 2011] Updating source flux to 3.3e-14
[Mon Oct 17 06:42:50 2011] Reading fit data from acisf08566/analysis//spectral/fullrun_ccd6_acisf08566_pi14-548_pass1_cl_src1_pl.csv
[Mon Oct 17 06:42:50 2011] Spectral fit parameter nH value = 3.38721e+15
[Mon Oct 17 06:42:50 2011] Spectral fit parameter PhoIndex value = 1.32224
[Mon Oct 17 06:42:50 2011] Failed to get F(0.3-8.0) from acisf08566/analysis//spectral/fullrun_ccd6_acisf08566_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Oct 17 06:42:50 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 06:42:50 2011] Using Nh = 3.4e+15, photon index=1.32, rate=0.00284, arf fullrun_ccd6_acisf08566_pi14-548_pass1_cl_src1.arf
[Mon Oct 17 06:42:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 06:42:50 2011] Updating source flux to 4e-14