[Tue Sep 27 02:29:11 2011] Detection parameters:
  Position = (319.6, 724.1) = 7 51 21.14 31 3 52.2
  Extent = 0.7" x 0.5", rotation angle = 142 degrees
  Source counts = 19.1 +/- 4.5
  Background counts = 0.9
  Rate = 0.0006 +/- 0.0002

[Tue Sep 27 02:29:12 2011] Off-axis axis estimate = 4.97'
[Tue Sep 27 02:29:56 2011] Using EEF radius (= 1.17 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 02:29:56 2011] Initial guess for spatial extent in simple fitting = 1.17"
[Tue Sep 27 02:29:56 2011] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.906
[Tue Sep 27 02:29:56 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 1.17"
[Tue Sep 27 02:29:57 2011] fullrun_ccd6_acisf08524_pi14-548_cl_pass0_src6.ximg exists
[Tue Sep 27 02:29:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf08524_pi14-548_cl_pass0_src6.csv
[Tue Sep 27 02:29:57 2011] fullrun_ccd6_acisf08524_pi14-548_cl_pass0_src6_1.ximg exists
[Tue Sep 27 02:29:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf08524_pi14-548_cl_pass0_src6.csv
[Tue Sep 27 02:29:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf08524_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf08524_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 02:29:57 2011] fullrun_ccd6_acisf08524_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Tue Sep 27 02:29:57 2011] fullrun_ccd6_acisf08524_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Sep 27 02:29:57 2011] Fit fullrun_ccd6_acisf08524_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Tue Sep 27 02:30:04 2011] Spatial fit model total counts = 29.910800, observed total counts = 30.000000
[Tue Sep 27 02:30:04 2011] Offset between fit and detection position for source 6 = 0.687753 pixels
[Tue Sep 27 02:30:04 2011] 29.978400 total counts/ 13.956800 bgd. counts: snr = 4.288574
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.687753 pixels
  Position = (319.8, 724.7) = 7 51 21.14 31 3 52.2
  Extent = 0.8 (0.5-1.2)", rotation angle = 0
  Source counts = 16.0 +/- 5.5
  Background counts = 14.0
  Rate = 0.0005 +/- 0.0002
[Tue Sep 27 02:30:04 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 02:30:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 02:30:04 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 02:30:04 2011] Source does appear to be extended
[Tue Sep 27 02:30:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 02:30:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 02:30:20 2011] Initial guess for spatial extent in simple fitting = 0.81"
[Tue Sep 27 02:30:20 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.875
[Tue Sep 27 02:30:20 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.81"
[Tue Sep 27 02:30:20 2011] fullrun_ccd6_acisf08524_pi14-548_cl_pass1_src6.ximg exists
[Tue Sep 27 02:30:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf08524_pi14-548_cl_pass1_src6.csv
[Tue Sep 27 02:30:20 2011] fullrun_ccd6_acisf08524_pi14-548_cl_pass1_src6_1.ximg exists
[Tue Sep 27 02:30:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf08524_pi14-548_cl_pass1_src6.csv
[Tue Sep 27 02:30:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf08524_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf08524_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 02:30:21 2011] fullrun_ccd6_acisf08524_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Tue Sep 27 02:30:21 2011] fullrun_ccd6_acisf08524_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Sep 27 02:30:21 2011] Fit fullrun_ccd6_acisf08524_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Tue Sep 27 02:30:28 2011] Spatial fit model total counts = 29.910500, observed total counts = 30.000000
[Tue Sep 27 02:30:28 2011] Offset between fit and detection position for source 6 = 0.002281 pixels
[Tue Sep 27 02:30:28 2011] 29.979800 total counts/ 13.981400 bgd. counts: snr = 4.278595
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.002281 pixels
  Position = (319.8, 724.7) = 7 51 21.14 31 3 52.2
  Extent = 0.8 (0.5-1.2)", rotation angle = 0
  Source counts = 16.0 +/- 5.5
  Background counts = 14.0
  Rate = 0.0005 +/- 0.0002
[Tue Sep 27 02:30:28 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 02:30:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 02:30:28 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 02:30:28 2011] Source does appear to be extended
[Tue Sep 27 02:30:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 02:31:09 2011] Not overwriting source region fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src6_src.reg
[Tue Sep 27 02:31:09 2011] Extracting stamp from image fullrun_ccd6_acisf08524_pi14-548_cl_sm2.00.img.gz, (283, 688) - (357, 761)
[Tue Sep 27 02:31:09 2011] Writing fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src6.gif
[Tue Sep 27 02:31:27 2011] ../../acisf08524/products/events/fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src6_src.evt and ../../acisf08524/products/events/fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Tue Sep 27 02:31:27 2011] Size of ../../acisf08524/products/events/fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src6_src.evt.gz[events] = 21 counts
[Tue Sep 27 02:31:27 2011] Mean chipx,y = (696.86, 234.33)
[Tue Sep 27 02:31:27 2011] Mean tdetx,y = (3571.86, 1936.33)
[Tue Sep 27 02:31:27 2011] chipx,y range = (678.00-712.00, 217.00-251.00)
[Tue Sep 27 02:31:27 2011] Size of ../../acisf08524/products/events/fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 8 counts
[Tue Sep 27 02:31:27 2011] ../../acisf08524/products/images/fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src6_src.img and ../../acisf08524/products/images/fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Tue Sep 27 02:31:27 2011] ../../acisf08524/products/spectra/fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src6_src.pi and ../../acisf08524/products/spectra/fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Tue Sep 27 02:31:27 2011] Not generating rmf since there are only 15 counts
[Tue Sep 27 02:31:33 2011] ../../acisf08524/products/lightcurves/fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src6_src.lc and ../../acisf08524/products/lightcurves/fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Tue Sep 27 02:31:57 2011] 188.47
[Tue Sep 27 02:33:11 2011] Updating aperture counts using extracted products
[Tue Sep 27 02:33:11 2011] Error reading totcts from fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src6_src.pi.gz
[Tue Sep 27 02:33:11 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 02:33:11 2011] Using photon index=1.80, rate=0.000539, arf fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src6.arf
[Tue Sep 27 02:33:11 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 02:33:11 2011] Updating source flux to 6.1e-15
[Tue Sep 27 02:33:16 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting