[Tue Sep 27 02:29:11 2011] Detection parameters:
  Position = (891.5, 385.6) = 7 50 59.24 31 1 5.6
  Extent = 3.7" x 3.1", rotation angle = 151 degrees
  Source counts = 143.3 +/- 13.2
  Background counts = 31.7
  Rate = 0.005 +/- 0.0004

[Tue Sep 27 02:29:12 2011] Off-axis axis estimate = 8.69'
[Tue Sep 27 02:29:56 2011] Using EEF radius (= 3.33 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 02:29:56 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 02:29:56 2011] Initial guess for spatial extent in simple fitting = 3.33"
[Tue Sep 27 02:29:56 2011] source mask rpix=6.8, npix_max = 211, mask sum = 218, frac = 1.029
[Tue Sep 27 02:29:56 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.33"
[Tue Sep 27 02:29:57 2011] fullrun_ccd6_acisf08524_pi14-548_cl_pass0_src1.ximg exists
[Tue Sep 27 02:29:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf08524_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 02:29:57 2011] fullrun_ccd6_acisf08524_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Sep 27 02:29:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf08524_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 02:29:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf08524_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf08524_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 02:29:57 2011] fullrun_ccd6_acisf08524_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Sep 27 02:29:57 2011] fullrun_ccd6_acisf08524_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Sep 27 02:29:57 2011] Fit fullrun_ccd6_acisf08524_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Sep 27 02:30:04 2011] Spatial fit model total counts = 181.118000, observed total counts = 184.000000
[Tue Sep 27 02:30:04 2011] Offset between fit and detection position for source 1 = 2.876609 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.876609 pixels
  Position = (894.3, 386.4) = 7 50 59.16 31 1 5.7
  Extent = 4.6 (4.5-4.7)", rotation angle = 0
  Source counts = 179.4 +/- 13.4
  Background counts = 0.0
  Rate = 0.006 +/- 0.0005
[Tue Sep 27 02:30:04 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 02:30:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 02:30:04 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 02:30:04 2011] Source does appear to be extended
[Tue Sep 27 02:30:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 02:30:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 02:30:20 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 02:30:20 2011] Initial guess for spatial extent in simple fitting = 4.61"
[Tue Sep 27 02:30:20 2011] source mask rpix=9.4, npix_max = 388, mask sum = 365, frac = 0.939
[Tue Sep 27 02:30:20 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.61"
[Tue Sep 27 02:30:20 2011] fullrun_ccd6_acisf08524_pi14-548_cl_pass1_src1.ximg exists
[Tue Sep 27 02:30:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf08524_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 02:30:20 2011] fullrun_ccd6_acisf08524_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Sep 27 02:30:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf08524_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 02:30:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf08524_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf08524_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 02:30:21 2011] fullrun_ccd6_acisf08524_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Sep 27 02:30:21 2011] fullrun_ccd6_acisf08524_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Sep 27 02:30:21 2011] Fit fullrun_ccd6_acisf08524_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Sep 27 02:30:28 2011] Spatial fit model total counts = 209.400000, observed total counts = 206.000000
[Tue Sep 27 02:30:28 2011] Offset between fit and detection position for source 1 = 1.124216 pixels
[Tue Sep 27 02:30:28 2011] 208.938400 total counts/ 46.461400 bgd. counts: snr = 23.836679
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.124216 pixels
  Position = (893.2, 386.4) = 7 50 59.20 31 1 5.7
  Extent = 4.3 (3.8-4.8)", rotation angle = 0
  Source counts = 162.5 +/- 14.5
  Background counts = 46.5
  Rate = 0.005 +/- 0.0005
[Tue Sep 27 02:30:28 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 02:30:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 02:30:28 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 02:30:28 2011] Source does appear to be extended
[Tue Sep 27 02:30:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 02:31:09 2011] Not overwriting source region fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src1_src.reg
[Tue Sep 27 02:31:09 2011] Extracting stamp from image fullrun_ccd6_acisf08524_pi14-548_cl_sm2.00.img.gz, (697, 190) - (1089, 583)
[Tue Sep 27 02:31:09 2011] Writing fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src1.gif
[Tue Sep 27 02:31:10 2011] ../../acisf08524/products/events/fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src1_src.evt and ../../acisf08524/products/events/fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Sep 27 02:31:10 2011] Size of ../../acisf08524/products/events/fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src1_src.evt.gz[events] = 187 counts
[Tue Sep 27 02:31:10 2011] Mean chipx,y = (189.24, 667.39)
[Tue Sep 27 02:31:10 2011] Mean tdetx,y = (3064.24, 2369.39)
[Tue Sep 27 02:31:10 2011] chipx,y range = (151.00-227.00, 629.00-698.00)
[Tue Sep 27 02:31:10 2011] Size of ../../acisf08524/products/events/fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 337 counts
[Tue Sep 27 02:31:10 2011] ../../acisf08524/products/images/fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src1_src.img and ../../acisf08524/products/images/fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Sep 27 02:31:10 2011] ../../acisf08524/products/spectra/fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src1_src.pi and ../../acisf08524/products/spectra/fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Sep 27 02:31:14 2011] ../../acisf08524/products/lightcurves/fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src1_src.lc and ../../acisf08524/products/lightcurves/fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Sep 27 02:31:57 2011] Keeping rmf generated by specextract
[Tue Sep 27 02:31:57 2011] 168.316
[Tue Sep 27 02:33:11 2011] Updating aperture counts using extracted products
[Tue Sep 27 02:33:11 2011] Error reading totcts from fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Sep 27 02:33:11 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 02:33:11 2011] Using photon index=1.80, rate=0.00548, arf fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src1.arf
[Tue Sep 27 02:33:11 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 02:33:11 2011] Updating source flux to 6.7e-14
[Tue Sep 27 02:33:19 2011] Reading fit data from acisf08524/analysis//spectral/fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src1_pl.csv
[Tue Sep 27 02:33:19 2011] Spectral fit parameter nH value = 9.22464e+20
[Tue Sep 27 02:33:19 2011] Spectral fit parameter PhoIndex value = 1.81536
[Tue Sep 27 02:33:19 2011] Failed to get F(0.3-8.0) from acisf08524/analysis//spectral/fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Sep 27 02:33:19 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 02:33:19 2011] Using Nh = 9.2e+20, photon index=1.82, rate=0.00548, arf fullrun_ccd6_acisf08524_pi14-548_pass1_cl_src1.arf
[Tue Sep 27 02:33:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 02:33:19 2011] Updating source flux to 6.6e-14