[Fri Sep 30 17:05:32 2011] Detection parameters:
  Position = (343.4, 1074.6) = 20 21 10.31 36 42 29.2
  Extent = 2.8" x 2.0", rotation angle = 60 degrees
  Source counts = 15.0 +/- 4.6
  Background counts = 6.0
  Rate = 0.0004 +/- 0.0001

[Fri Sep 30 17:05:32 2011] Off-axis axis estimate = 8.92'
[Fri Sep 30 17:06:38 2011] Using EEF radius (= 3.51 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 17:06:38 2011] Initial guess for spatial extent in simple fitting = 3.51"
[Fri Sep 30 17:06:38 2011] source mask rpix=7.1, npix_max = 233, mask sum = 225, frac = 0.963
[Fri Sep 30 17:06:38 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 3.51"
[Fri Sep 30 17:06:38 2011] fullrun_ccd2_acisf08502_pi14-548_cl_pass0_src2.ximg exists
[Fri Sep 30 17:06:38 2011] fullrun_ccd2_acisf08502_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Sep 30 17:06:38 2011] Fit fullrun_ccd2_acisf08502_pi14-548_cl_pass0_src2 appears to have run properly
[Fri Sep 30 17:06:38 2011] fullrun_ccd2_acisf08502_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Sep 30 17:06:39 2011] fullrun_ccd2_acisf08502_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Sep 30 17:06:39 2011] Fit fullrun_ccd2_acisf08502_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Sep 30 17:06:45 2011] Spatial fit model total counts = 28.003000, observed total counts = 29.000000
[Fri Sep 30 17:06:45 2011] Offset between fit and detection position for source 2 = 4.303737 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 4.303737 pixels
  Position = (341.3, 1078.3) = 20 21 10.42 36 42 30.8
  Extent = 3.9 (2.2-4.7)", rotation angle = 0
  Source counts = 27.7 +/- 5.3
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Fri Sep 30 17:06:45 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 17:06:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 17:06:45 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 17:06:45 2011] Source does appear to be extended
[Fri Sep 30 17:06:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 17:07:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 17:07:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 17:07:06 2011] Initial guess for spatial extent in simple fitting = 3.87"
[Fri Sep 30 17:07:06 2011] source mask rpix=7.9, npix_max = 280, mask sum = 271, frac = 0.968
[Fri Sep 30 17:07:06 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 3.87"
[Fri Sep 30 17:07:06 2011] fullrun_ccd2_acisf08502_pi14-548_cl_pass1_src2.ximg exists
[Fri Sep 30 17:07:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08502_pi14-548_cl_pass1_src2.csv
[Fri Sep 30 17:07:06 2011] fullrun_ccd2_acisf08502_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Sep 30 17:07:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08502_pi14-548_cl_pass1_src2.csv
[Fri Sep 30 17:07:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08502_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08502_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 17:07:06 2011] fullrun_ccd2_acisf08502_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Sep 30 17:07:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08502_pi14-548_cl_pass1_tfrozen_src2.csv
[Fri Sep 30 17:07:06 2011] fullrun_ccd2_acisf08502_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Sep 30 17:07:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08502_pi14-548_cl_pass1_tfrozen_src2.csv
[Fri Sep 30 17:07:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08502_pi14-548_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08502_pi14-548_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 17:07:18 2011] Warning, spatial fit 2 centroid is now closest to src. 4
[Fri Sep 30 17:07:18 2011] Source 2 in spatial fitting is no longer close to this source
[Fri Sep 30 17:07:18 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 17:07:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 17:07:18 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 17:07:18 2011] Source does appear to be extended
[Fri Sep 30 17:07:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 17:07:42 2011] Not overwriting source region fullrun_ccd2_acisf08502_pi14-548_pass1_cl_src2_src.reg
[Fri Sep 30 17:07:42 2011] Extracting stamp from image fullrun_ccd2_acisf08502_pi14-548_cl_sm2.00.img.gz, (164, 901) - (518, 1255)
[Fri Sep 30 17:07:42 2011] Writing fullrun_ccd2_acisf08502_pi14-548_pass1_cl_src2.gif
[Fri Sep 30 17:07:51 2011] ../../acisf08502/products/events/fullrun_ccd2_acisf08502_pi14-548_pass1_cl_src2_src.evt and ../../acisf08502/products/events/fullrun_ccd2_acisf08502_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Sep 30 17:07:51 2011] Size of ../../acisf08502/products/events/fullrun_ccd2_acisf08502_pi14-548_pass1_cl_src2_src.evt.gz[events] = 34 counts
[Fri Sep 30 17:07:51 2011] Mean chipx,y = (1002.56, 405.44)
[Fri Sep 30 17:07:51 2011] Mean tdetx,y = (3466.44, 3083.44)
[Fri Sep 30 17:07:51 2011] chipx,y range = (978.00-1022.00, 359.00-427.00)
[Fri Sep 30 17:07:51 2011] Size of ../../acisf08502/products/events/fullrun_ccd2_acisf08502_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 119 counts
[Fri Sep 30 17:07:51 2011] ../../acisf08502/products/images/fullrun_ccd2_acisf08502_pi14-548_pass1_cl_src2_src.img and ../../acisf08502/products/images/fullrun_ccd2_acisf08502_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Sep 30 17:07:51 2011] ../../acisf08502/products/spectra/fullrun_ccd2_acisf08502_pi14-548_pass1_cl_src2_src.pi and ../../acisf08502/products/spectra/fullrun_ccd2_acisf08502_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Sep 30 17:07:51 2011] Not generating rmf since there are only 27 counts
[Fri Sep 30 17:07:54 2011] ../../acisf08502/products/lightcurves/fullrun_ccd2_acisf08502_pi14-548_pass1_cl_src2_src.lc and ../../acisf08502/products/lightcurves/fullrun_ccd2_acisf08502_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Sep 30 17:08:02 2011] 100.326
[Fri Sep 30 17:10:13 2011] Updating aperture counts using extracted products
[Fri Sep 30 17:10:13 2011] Error reading totcts from fullrun_ccd2_acisf08502_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Sep 30 17:10:13 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 17:10:13 2011] Using photon index=1.80, rate=0.00082, arf fullrun_ccd2_acisf08502_pi14-548_pass1_cl_src2.arf
[Fri Sep 30 17:10:13 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 17:10:13 2011] Updating source flux to 2.3e-14
[Fri Sep 30 17:10:17 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 30 17:10:18 2011] acisf08502/analysis//spectral/fullrun_ccd2_acisf08502_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete