[Sun Oct 23 06:09:03 2011] Detection parameters:
  Position = (281.0, 382.5) = 20 7 5.39 27 29 28.1
  Extent = 0.5" x 0.5", rotation angle = 58 degrees
  Source counts = 42.4 +/- 6.7
  Background counts = 2.6
  Rate = 0.0008 +/- 0.0001

[Sun Oct 23 06:09:07 2011] Off-axis axis estimate = 2.21'
[Sun Oct 23 06:10:14 2011] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 06:10:14 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Sun Oct 23 06:10:14 2011] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.744
[Sun Oct 23 06:10:14 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 0.45"
[Sun Oct 23 06:10:15 2011] fullrun_ccd3_acisf08492_pi14-548_cl_pass0_src7.ximg exists
[Sun Oct 23 06:10:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08492_pi14-548_cl_pass0_src7.csv
[Sun Oct 23 06:10:15 2011] fullrun_ccd3_acisf08492_pi14-548_cl_pass0_src7_1.ximg exists
[Sun Oct 23 06:10:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08492_pi14-548_cl_pass0_src7.csv
[Sun Oct 23 06:10:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08492_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08492_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 06:10:17 2011] fullrun_ccd3_acisf08492_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Sun Oct 23 06:10:17 2011] fullrun_ccd3_acisf08492_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Oct 23 06:10:17 2011] Fit fullrun_ccd3_acisf08492_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Sun Oct 23 06:10:37 2011] Spatial fit model total counts = 55.999100, observed total counts = 56.000000
[Sun Oct 23 06:10:37 2011] Offset between fit and detection position for source 6 = 0.784402 pixels
[Sun Oct 23 06:10:37 2011] 55.328600 total counts/ 14.822600 bgd. counts: snr = 10.521003
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.784402 pixels
  Position = (281.6, 382.9) = 20 7 5.38 27 29 28.1
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 40.5 +/- 7.4
  Background counts = 14.8
  Rate = 0.0008 +/- 0.0001
[Sun Oct 23 06:10:38 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 06:10:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 06:10:38 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 06:10:38 2011] Source does appear to be extended
[Sun Oct 23 06:10:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 06:11:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 06:11:03 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Sun Oct 23 06:11:03 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.083
[Sun Oct 23 06:11:03 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 0.46"
[Sun Oct 23 06:11:05 2011] fullrun_ccd3_acisf08492_pi14-548_cl_pass1_src7.ximg exists
[Sun Oct 23 06:11:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08492_pi14-548_cl_pass1_src7.csv
[Sun Oct 23 06:11:05 2011] fullrun_ccd3_acisf08492_pi14-548_cl_pass1_src7_1.ximg exists
[Sun Oct 23 06:11:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08492_pi14-548_cl_pass1_src7.csv
[Sun Oct 23 06:11:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08492_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08492_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 06:11:05 2011] fullrun_ccd3_acisf08492_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Sun Oct 23 06:11:05 2011] fullrun_ccd3_acisf08492_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Oct 23 06:11:05 2011] Fit fullrun_ccd3_acisf08492_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Oct 23 06:11:25 2011] Spatial fit model total counts = 52.999600, observed total counts = 53.000000
[Sun Oct 23 06:11:25 2011] Offset between fit and detection position for source 6 = 0.015405 pixels
[Sun Oct 23 06:11:25 2011] 52.617800 total counts/ 11.651700 bgd. counts: snr = 12.001346
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.015405 pixels
  Position = (281.6, 382.9) = 20 7 5.38 27 29 28.1
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 41.0 +/- 7.3
  Background counts = 11.7
  Rate = 0.0008 +/- 0.0001
[Sun Oct 23 06:11:25 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 06:11:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 06:11:25 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 06:11:25 2011] Source does appear to be extended
[Sun Oct 23 06:11:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 06:15:42 2011] Not overwriting source region fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src6_src.reg
[Sun Oct 23 06:15:42 2011] Extracting stamp from image fullrun_ccd3_acisf08492_pi14-548_cl_sm2.00.img.gz, (260, 361) - (303, 405)
[Sun Oct 23 06:15:42 2011] Writing fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src6.gif
[Sun Oct 23 06:16:04 2011] ../../acisf08492/products/events/fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src6_src.evt and ../../acisf08492/products/events/fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Sun Oct 23 06:16:04 2011] Size of ../../acisf08492/products/events/fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src6_src.evt.gz[events] = 43 counts
[Sun Oct 23 06:16:04 2011] Mean chipx,y = (814.44, 788.02)
[Sun Oct 23 06:16:04 2011] Mean tdetx,y = (4343.98, 3875.44)
[Sun Oct 23 06:16:04 2011] chipx,y range = (795.00-832.00, 770.00-807.00)
[Sun Oct 23 06:16:04 2011] Size of ../../acisf08492/products/events/fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 19 counts
[Sun Oct 23 06:16:04 2011] ../../acisf08492/products/images/fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src6_src.img and ../../acisf08492/products/images/fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Sun Oct 23 06:16:04 2011] ../../acisf08492/products/spectra/fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src6_src.pi and ../../acisf08492/products/spectra/fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Sun Oct 23 06:16:04 2011] Not generating rmf since there are only 40 counts
[Sun Oct 23 06:16:08 2011] ../../acisf08492/products/lightcurves/fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src6_src.lc and ../../acisf08492/products/lightcurves/fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Sun Oct 23 06:18:47 2011] 198.787
[Sun Oct 23 06:18:55 2011] Updating aperture counts using extracted products
[Sun Oct 23 06:18:55 2011] Error reading totcts from fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src6_src.pi.gz
[Sun Oct 23 06:18:55 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 06:18:55 2011] Using photon index=1.80, rate=0.000812, arf fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src6.arf
[Sun Oct 23 06:18:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 06:18:55 2011] Updating source flux to 1e-14
[Sun Oct 23 06:19:19 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting