[Sun Oct 23 06:09:05 2011] Detection parameters:
  Position = (421.7, 473.3) = 20 7 0.18 27 30 12.7
  Extent = 0.5" x 0.5", rotation angle = 150 degrees
  Source counts = 16.5 +/- 4.2
  Background counts = 1.5
  Rate = 0.0003 +/- 8e-05

[Sun Oct 23 06:09:07 2011] Off-axis axis estimate = 3.55'
[Sun Oct 23 06:10:14 2011] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 06:10:14 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Sun Oct 23 06:10:14 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.069
[Sun Oct 23 06:10:14 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 0.71"
[Sun Oct 23 06:10:16 2011] fullrun_ccd3_acisf08492_pi14-548_cl_pass0_src31.ximg exists
[Sun Oct 23 06:10:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08492_pi14-548_cl_pass0_src31.csv
[Sun Oct 23 06:10:16 2011] fullrun_ccd3_acisf08492_pi14-548_cl_pass0_src31_1.ximg exists
[Sun Oct 23 06:10:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08492_pi14-548_cl_pass0_src31.csv
[Sun Oct 23 06:10:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08492_pi14-548_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08492_pi14-548_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 06:10:17 2011] fullrun_ccd3_acisf08492_pi14-548_cl_pass0_tfrozen_src31.ximg exists
[Sun Oct 23 06:10:18 2011] fullrun_ccd3_acisf08492_pi14-548_cl_pass0_tfrozen_src31_1.ximg exists
[Sun Oct 23 06:10:18 2011] Fit fullrun_ccd3_acisf08492_pi14-548_cl_pass0_tfrozen_src31 appears to have run properly
[Sun Oct 23 06:10:38 2011] Spatial fit model total counts = 19.366800, observed total counts = 21.000000
[Sun Oct 23 06:10:38 2011] Offset between fit and detection position for source 47 = 0.953635 pixels
[Sun Oct 23 06:10:38 2011] 18.654670 total counts/ 1.852170 bgd. counts: snr = 12.346205
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 0.953635 pixels
  Position = (422.4, 474.0) = 20 7 0.17 27 30 12.8
  Extent = 0.7 (0.4-0.9)", rotation angle = 0
  Source counts = 16.8 +/- 4.3
  Background counts = 1.9
  Rate = 0.0003 +/- 9e-05
[Sun Oct 23 06:10:38 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 06:10:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 06:10:38 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 06:10:38 2011] Source does appear to be extended
[Sun Oct 23 06:10:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 06:11:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 06:11:03 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Sun Oct 23 06:11:03 2011] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.862
[Sun Oct 23 06:11:03 2011] Giving source the simple spatial ID 31 for pass 1, mean size = 0.67"
[Sun Oct 23 06:11:05 2011] fullrun_ccd3_acisf08492_pi14-548_cl_pass1_src31.ximg exists
[Sun Oct 23 06:11:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08492_pi14-548_cl_pass1_src31.csv
[Sun Oct 23 06:11:05 2011] fullrun_ccd3_acisf08492_pi14-548_cl_pass1_src31_1.ximg exists
[Sun Oct 23 06:11:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08492_pi14-548_cl_pass1_src31.csv
[Sun Oct 23 06:11:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08492_pi14-548_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08492_pi14-548_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 06:11:07 2011] fullrun_ccd3_acisf08492_pi14-548_cl_pass1_tfrozen_src31.ximg exists
[Sun Oct 23 06:11:07 2011] fullrun_ccd3_acisf08492_pi14-548_cl_pass1_tfrozen_src31_1.ximg exists
[Sun Oct 23 06:11:07 2011] Fit fullrun_ccd3_acisf08492_pi14-548_cl_pass1_tfrozen_src31 appears to have run properly
[Sun Oct 23 06:11:25 2011] Spatial fit model total counts = 20.991100, observed total counts = 21.000000
[Sun Oct 23 06:11:25 2011] Offset between fit and detection position for source 47 = 0.210076 pixels
[Sun Oct 23 06:11:25 2011] 20.989880 total counts/ 4.612180 bgd. counts: snr = 7.626052
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 0.210076 pixels
  Position = (422.5, 473.8) = 20 7 0.17 27 30 12.7
  Extent = 0.6 (0.4-0.9)", rotation angle = 0
  Source counts = 16.4 +/- 4.6
  Background counts = 4.6
  Rate = 0.0003 +/- 9e-05
[Sun Oct 23 06:11:25 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 06:11:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 06:11:25 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 06:11:25 2011] Source does appear to be extended
[Sun Oct 23 06:11:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 06:15:43 2011] Not overwriting source region fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src47_src.reg
[Sun Oct 23 06:15:43 2011] Extracting stamp from image fullrun_ccd3_acisf08492_pi14-548_cl_sm2.00.img.gz, (395, 446) - (450, 501)
[Sun Oct 23 06:15:43 2011] Writing fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src47.gif
[Sun Oct 23 06:17:11 2011] ../../acisf08492/products/events/fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src47_src.evt and ../../acisf08492/products/events/fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src47_bgd.evt exist, delete to re-create
[Sun Oct 23 06:17:11 2011] Size of ../../acisf08492/products/events/fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src47_src.evt.gz[events] = 19 counts
[Sun Oct 23 06:17:11 2011] Mean chipx,y = (690.47, 669.58)
[Sun Oct 23 06:17:11 2011] Mean tdetx,y = (4462.42, 3751.47)
[Sun Oct 23 06:17:11 2011] chipx,y range = (678.00-709.00, 652.00-685.00)
[Sun Oct 23 06:17:11 2011] Size of ../../acisf08492/products/events/fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src47_bgd.evt.gz[events] = 14 counts
[Sun Oct 23 06:17:11 2011] ../../acisf08492/products/images/fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src47_src.img and ../../acisf08492/products/images/fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src47_bgd.img exist, delete to re-create
[Sun Oct 23 06:17:11 2011] ../../acisf08492/products/spectra/fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src47_src.pi and ../../acisf08492/products/spectra/fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src47_bgd.pi exist, delete to re-create
[Sun Oct 23 06:17:11 2011] Not generating rmf since there are only 16 counts
[Sun Oct 23 06:17:14 2011] ../../acisf08492/products/lightcurves/fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src47_src.lc and ../../acisf08492/products/lightcurves/fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src47_bgd.lc exist, delete to re-create
[Sun Oct 23 06:18:48 2011] 191.733
[Sun Oct 23 06:18:55 2011] Updating aperture counts using extracted products
[Sun Oct 23 06:18:55 2011] Error reading totcts from fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src47_src.pi.gz
[Sun Oct 23 06:18:55 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 06:18:55 2011] Using photon index=1.80, rate=0.000324, arf fullrun_ccd3_acisf08492_pi14-548_pass1_cl_src47.arf
[Sun Oct 23 06:18:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 06:18:55 2011] Updating source flux to 4.2e-15
[Sun Oct 23 06:19:19 2011] Source 47 has fewer than 100.000000 counts, skipping spectral fitting