[Sun Oct 23 06:09:01 2011] Detection parameters:
  Position = (385.6, 682.9) = 20 7 38.99 27 33 48.9
  Extent = 0.8" x 0.7", rotation angle = 156 degrees
  Source counts = 64.8 +/- 8.6
  Background counts = 9.2
  Rate = 0.001 +/- 0.0002

[Sun Oct 23 06:09:03 2011] Off-axis axis estimate = 7.36'
[Sun Oct 23 06:10:12 2011] Using EEF radius (= 2.40 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 06:10:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 23 06:10:12 2011] Initial guess for spatial extent in simple fitting = 2.40"
[Sun Oct 23 06:10:12 2011] source mask rpix=4.9, npix_max = 116, mask sum = 110, frac = 0.948
[Sun Oct 23 06:10:12 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 2.40"
[Sun Oct 23 06:10:13 2011] fullrun_ccd2_acisf08492_pi14-548_cl_pass0_src4.ximg exists
[Sun Oct 23 06:10:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08492_pi14-548_cl_pass0_src4.csv
[Sun Oct 23 06:10:13 2011] fullrun_ccd2_acisf08492_pi14-548_cl_pass0_src4_1.ximg exists
[Sun Oct 23 06:10:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08492_pi14-548_cl_pass0_src4.csv
[Sun Oct 23 06:10:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08492_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08492_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 06:10:13 2011] fullrun_ccd2_acisf08492_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Sun Oct 23 06:10:13 2011] fullrun_ccd2_acisf08492_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Oct 23 06:10:13 2011] Fit fullrun_ccd2_acisf08492_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Sun Oct 23 06:10:31 2011] Spatial fit model total counts = 158.183000, observed total counts = 158.000000
[Sun Oct 23 06:10:31 2011] Offset between fit and detection position for source 26 = 2.691667 pixels
[Sun Oct 23 06:10:31 2011] 160.522600 total counts/ 66.277700 bgd. counts: snr = 11.576416
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 2.691667 pixels
  Position = (382.9, 683.3) = 20 7 39.11 27 33 48.9
  Extent = 2.1 (1.7-2.8)", rotation angle = 0
  Source counts = 94.2 +/- 12.7
  Background counts = 66.3
  Rate = 0.002 +/- 0.0003
[Sun Oct 23 06:10:31 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 06:10:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 06:10:31 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 06:10:31 2011] Source does appear to be extended
[Sun Oct 23 06:10:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 06:11:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 06:11:02 2011] Initial guess for spatial extent in simple fitting = 2.08"
[Sun Oct 23 06:11:02 2011] source mask rpix=4.2, npix_max = 89, mask sum = 90, frac = 1.005
[Sun Oct 23 06:11:02 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 2.08"
[Sun Oct 23 06:11:02 2011] fullrun_ccd2_acisf08492_pi14-548_cl_pass1_src4.ximg exists
[Sun Oct 23 06:11:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08492_pi14-548_cl_pass1_src4.csv
[Sun Oct 23 06:11:02 2011] fullrun_ccd2_acisf08492_pi14-548_cl_pass1_src4_1.ximg exists
[Sun Oct 23 06:11:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08492_pi14-548_cl_pass1_src4.csv
[Sun Oct 23 06:11:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08492_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08492_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 06:11:03 2011] fullrun_ccd2_acisf08492_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Sun Oct 23 06:11:03 2011] fullrun_ccd2_acisf08492_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Oct 23 06:11:03 2011] Fit fullrun_ccd2_acisf08492_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Sun Oct 23 06:11:19 2011] Spatial fit model total counts = 138.734000, observed total counts = 139.000000
[Sun Oct 23 06:11:19 2011] Offset between fit and detection position for source 26 = 0.195164 pixels
[Sun Oct 23 06:11:19 2011] 141.606100 total counts/ 57.518000 bgd. counts: snr = 11.087475
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.195164 pixels
  Position = (382.9, 683.1) = 20 7 39.11 27 33 48.8
  Extent = 2.0 (1.6-2.5)", rotation angle = 0
  Source counts = 84.1 +/- 11.9
  Background counts = 57.5
  Rate = 0.002 +/- 0.0002
[Sun Oct 23 06:11:19 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 06:11:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 06:11:19 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 06:11:19 2011] Source does appear to be extended
[Sun Oct 23 06:11:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 06:13:46 2011] Not overwriting source region fullrun_ccd2_acisf08492_pi14-548_pass1_cl_src26_src.reg
[Sun Oct 23 06:13:46 2011] Extracting stamp from image fullrun_ccd2_acisf08492_pi14-548_cl_sm2.00.img.gz, (293, 593) - (473, 773)
[Sun Oct 23 06:13:46 2011] Writing fullrun_ccd2_acisf08492_pi14-548_pass1_cl_src26.gif
[Sun Oct 23 06:13:58 2011] ../../acisf08492/products/events/fullrun_ccd2_acisf08492_pi14-548_pass1_cl_src26_src.evt and ../../acisf08492/products/events/fullrun_ccd2_acisf08492_pi14-548_pass1_cl_src26_bgd.evt exist, delete to re-create
[Sun Oct 23 06:13:58 2011] Size of ../../acisf08492/products/events/fullrun_ccd2_acisf08492_pi14-548_pass1_cl_src26_src.evt.gz[events] = 155 counts
[Sun Oct 23 06:13:58 2011] Mean chipx,y = (530.92, 276.36)
[Sun Oct 23 06:13:58 2011] Mean tdetx,y = (3337.36, 3555.08)
[Sun Oct 23 06:13:58 2011] chipx,y range = (499.00-551.00, 247.00-303.00)
[Sun Oct 23 06:13:58 2011] Size of ../../acisf08492/products/events/fullrun_ccd2_acisf08492_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 162 counts
[Sun Oct 23 06:13:58 2011] ../../acisf08492/products/images/fullrun_ccd2_acisf08492_pi14-548_pass1_cl_src26_src.img and ../../acisf08492/products/images/fullrun_ccd2_acisf08492_pi14-548_pass1_cl_src26_bgd.img exist, delete to re-create
[Sun Oct 23 06:13:58 2011] ../../acisf08492/products/spectra/fullrun_ccd2_acisf08492_pi14-548_pass1_cl_src26_src.pi and ../../acisf08492/products/spectra/fullrun_ccd2_acisf08492_pi14-548_pass1_cl_src26_bgd.pi exist, delete to re-create
[Sun Oct 23 06:13:58 2011] Not generating rmf since there are only 84 counts
[Sun Oct 23 06:14:01 2011] ../../acisf08492/products/lightcurves/fullrun_ccd2_acisf08492_pi14-548_pass1_cl_src26_src.lc and ../../acisf08492/products/lightcurves/fullrun_ccd2_acisf08492_pi14-548_pass1_cl_src26_bgd.lc exist, delete to re-create
[Sun Oct 23 06:15:41 2011] 174.711
[Sun Oct 23 06:18:54 2011] Updating aperture counts using extracted products
[Sun Oct 23 06:18:54 2011] Error reading totcts from fullrun_ccd2_acisf08492_pi14-548_pass1_cl_src26_src.pi.gz
[Sun Oct 23 06:18:54 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 06:18:54 2011] Using photon index=1.80, rate=0.00167, arf fullrun_ccd2_acisf08492_pi14-548_pass1_cl_src26.arf
[Sun Oct 23 06:18:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 06:18:54 2011] Updating source flux to 2.3e-14
[Sun Oct 23 06:19:10 2011] Source 26 has fewer than 100.000000 counts, skipping spectral fitting