[Fri Oct 28 16:17:40 2011] Detection parameters:
  Position = (794.8, 825.3) = 5 23 0.12 33 35 30.0
  Extent = 0.6" x 0.5", rotation angle = 130 degrees
  Source counts = 156.0 +/- 13.1
  Background counts = 15.0
  Rate = 0.003 +/- 0.0002

[Fri Oct 28 16:17:44 2011] Off-axis axis estimate = 7.44'
[Fri Oct 28 16:19:31 2011] Using EEF radius (= 2.45 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 16:19:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 16:19:31 2011] Initial guess for spatial extent in simple fitting = 2.45"
[Fri Oct 28 16:19:31 2011] source mask rpix=5.0, npix_max = 120, mask sum = 111, frac = 0.924
[Fri Oct 28 16:19:31 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.45"
[Fri Oct 28 16:19:32 2011] fullrun_ccd0_acisf08476_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 28 16:19:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf08476_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 16:19:32 2011] fullrun_ccd0_acisf08476_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 28 16:19:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf08476_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 16:19:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf08476_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf08476_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 16:19:33 2011] fullrun_ccd0_acisf08476_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 28 16:19:33 2011] fullrun_ccd0_acisf08476_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 28 16:19:33 2011] Fit fullrun_ccd0_acisf08476_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 28 16:20:12 2011] Spatial fit model total counts = 233.467000, observed total counts = 238.000000
[Fri Oct 28 16:20:12 2011] Offset between fit and detection position for source 1 = 0.427958 pixels
[Fri Oct 28 16:20:12 2011] 234.082600 total counts/ 38.808600 bgd. counts: snr = 31.345878
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.427958 pixels
  Position = (794.8, 825.8) = 5 23 0.14 33 35 30.0
  Extent = 2.1 (1.9-2.4)", rotation angle = 0
  Source counts = 195.3 +/- 15.3
  Background counts = 38.8
  Rate = 0.004 +/- 0.0003
[Fri Oct 28 16:20:12 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 16:20:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 16:20:12 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 16:20:12 2011] Source does appear to be extended
[Fri Oct 28 16:20:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 16:21:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 16:21:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 16:21:09 2011] Initial guess for spatial extent in simple fitting = 2.15"
[Fri Oct 28 16:21:09 2011] source mask rpix=4.4, npix_max = 94, mask sum = 91, frac = 0.963
[Fri Oct 28 16:21:09 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.15"
[Fri Oct 28 16:21:10 2011] fullrun_ccd0_acisf08476_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 28 16:21:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf08476_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 16:21:10 2011] fullrun_ccd0_acisf08476_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 28 16:21:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf08476_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 16:21:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf08476_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf08476_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 16:21:11 2011] fullrun_ccd0_acisf08476_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 28 16:21:11 2011] fullrun_ccd0_acisf08476_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 28 16:21:11 2011] Fit fullrun_ccd0_acisf08476_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 28 16:21:45 2011] Spatial fit model total counts = 227.279000, observed total counts = 232.000000
[Fri Oct 28 16:21:45 2011] Offset between fit and detection position for source 1 = 0.067782 pixels
[Fri Oct 28 16:21:45 2011] 227.445000 total counts/ 37.462000 bgd. counts: snr = 31.039825
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.067782 pixels
  Position = (794.9, 825.8) = 5 23 0.14 33 35 30.0
  Extent = 2.1 (1.8-2.3)", rotation angle = 0
  Source counts = 190.0 +/- 15.1
  Background counts = 37.5
  Rate = 0.004 +/- 0.0003
[Fri Oct 28 16:21:45 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 16:21:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 16:21:45 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 16:21:45 2011] Source does appear to be extended
[Fri Oct 28 16:21:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 16:22:40 2011] Not overwriting source region fullrun_ccd0_acisf08476_pi14-548_pass1_cl_src1_src.reg
[Fri Oct 28 16:22:40 2011] Extracting stamp from image fullrun_ccd0_acisf08476_pi14-548_cl_sm2.00.img.gz, (699, 730) - (891, 921)
[Fri Oct 28 16:22:40 2011] Writing fullrun_ccd0_acisf08476_pi14-548_pass1_cl_src1.gif
[Fri Oct 28 16:22:44 2011] ../../acisf08476/products/events/fullrun_ccd0_acisf08476_pi14-548_pass1_cl_src1_src.evt and ../../acisf08476/products/events/fullrun_ccd0_acisf08476_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct 28 16:22:44 2011] Size of ../../acisf08476/products/events/fullrun_ccd0_acisf08476_pi14-548_pass1_cl_src1_src.evt.gz[events] = 226 counts
[Fri Oct 28 16:22:44 2011] Mean chipx,y = (603.30, 307.62)
[Fri Oct 28 16:22:44 2011] Mean tdetx,y = (3368.62, 4528.70)
[Fri Oct 28 16:22:44 2011] chipx,y range = (576.00-630.00, 277.00-332.00)
[Fri Oct 28 16:22:44 2011] Size of ../../acisf08476/products/events/fullrun_ccd0_acisf08476_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 170 counts
[Fri Oct 28 16:22:44 2011] ../../acisf08476/products/images/fullrun_ccd0_acisf08476_pi14-548_pass1_cl_src1_src.img and ../../acisf08476/products/images/fullrun_ccd0_acisf08476_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct 28 16:22:44 2011] ../../acisf08476/products/spectra/fullrun_ccd0_acisf08476_pi14-548_pass1_cl_src1_src.pi and ../../acisf08476/products/spectra/fullrun_ccd0_acisf08476_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct 28 16:22:47 2011] ../../acisf08476/products/lightcurves/fullrun_ccd0_acisf08476_pi14-548_pass1_cl_src1_src.lc and ../../acisf08476/products/lightcurves/fullrun_ccd0_acisf08476_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct 28 16:25:35 2011] Keeping rmf generated by specextract
[Fri Oct 28 16:25:35 2011] 171.113
[Fri Oct 28 18:49:49 2011] Updating aperture counts using extracted products
[Fri Oct 28 18:49:49 2011] Error reading totcts from fullrun_ccd0_acisf08476_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct 28 18:49:50 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 18:49:50 2011] Using photon index=1.80, rate=0.00357, arf fullrun_ccd0_acisf08476_pi14-548_pass1_cl_src1.arf
[Fri Oct 28 18:49:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 18:49:50 2011] Updating source flux to 5.1e-14
[Fri Oct 28 18:50:09 2011] Reading fit data from acisf08476/analysis//spectral/fullrun_ccd0_acisf08476_pi14-548_pass1_cl_src1_pl.csv
[Fri Oct 28 18:50:09 2011] Spectral fit parameter nH value = 2.03684e+22
[Fri Oct 28 18:50:09 2011] Spectral fit parameter PhoIndex value = 2.27944
[Fri Oct 28 18:50:09 2011] Failed to get F(0.3-8.0) from acisf08476/analysis//spectral/fullrun_ccd0_acisf08476_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct 28 18:50:09 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 18:50:09 2011] Using Nh = 2e+22, photon index=2.28, rate=0.00357, arf fullrun_ccd0_acisf08476_pi14-548_pass1_cl_src1.arf
[Fri Oct 28 18:50:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 18:50:09 2011] Updating source flux to 6.3e-14