[Sun Sep 25 22:40:55 2011] Detection parameters:
  Position = (666.8, 1089.3) = 4 56 18.13 -66 27 21.3
  Extent = 0.5" x 0.5", rotation angle = 72 degrees
  Source counts = 10.7 +/- 3.5
  Background counts = 1.3
  Rate = 0.0002 +/- 7e-05

[Sun Sep 25 22:40:58 2011] Off-axis axis estimate = 2.92'
[Sun Sep 25 22:42:10 2011] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 22:42:10 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Sun Sep 25 22:42:10 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.829
[Sun Sep 25 22:42:10 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 0.56"
[Sun Sep 25 22:42:11 2011] fullrun_ccd3_acisf08468_pi14-548_cl_pass0_src15.ximg exists
[Sun Sep 25 22:42:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08468_pi14-548_cl_pass0_src15.csv
[Sun Sep 25 22:42:11 2011] fullrun_ccd3_acisf08468_pi14-548_cl_pass0_src15_1.ximg exists
[Sun Sep 25 22:42:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08468_pi14-548_cl_pass0_src15.csv
[Sun Sep 25 22:42:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08468_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08468_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 22:42:12 2011] fullrun_ccd3_acisf08468_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Sun Sep 25 22:42:12 2011] fullrun_ccd3_acisf08468_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Sep 25 22:42:12 2011] Fit fullrun_ccd3_acisf08468_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Sun Sep 25 22:42:29 2011] Spatial fit model total counts = 17.961200, observed total counts = 18.000000
[Sun Sep 25 22:42:29 2011] Offset between fit and detection position for source 14 = 1.047357 pixels
[Sun Sep 25 22:42:29 2011] 17.400800 total counts/ 6.747100 bgd. counts: snr = 4.101492
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 1.047357 pixels
  Position = (667.5, 1090.2) = 4 56 18.12 -66 27 21.1
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 10.7 +/- 4.2
  Background counts = 6.7
  Rate = 0.0002 +/- 9e-05
[Sun Sep 25 22:42:29 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 22:42:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 22:42:29 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 22:42:29 2011] Source does appear to be extended
[Sun Sep 25 22:42:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 22:42:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 22:42:56 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Sep 25 22:42:56 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.929
[Sun Sep 25 22:42:56 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.38"
[Sun Sep 25 22:42:56 2011] fullrun_ccd3_acisf08468_pi14-548_cl_pass1_src15.ximg exists
[Sun Sep 25 22:42:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08468_pi14-548_cl_pass1_src15.csv
[Sun Sep 25 22:42:56 2011] fullrun_ccd3_acisf08468_pi14-548_cl_pass1_src15_1.ximg exists
[Sun Sep 25 22:42:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08468_pi14-548_cl_pass1_src15.csv
[Sun Sep 25 22:42:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08468_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08468_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 22:42:57 2011] fullrun_ccd3_acisf08468_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Sun Sep 25 22:42:57 2011] fullrun_ccd3_acisf08468_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Sep 25 22:42:58 2011] Fit fullrun_ccd3_acisf08468_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Sep 25 22:43:09 2011] Spatial fit model total counts = 17.162400, observed total counts = 17.000000
[Sun Sep 25 22:43:09 2011] Offset between fit and detection position for source 14 = 0.013774 pixels
[Sun Sep 25 22:43:09 2011] 16.526900 total counts/ 5.781500 bgd. counts: snr = 4.468917
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.013774 pixels
  Position = (667.5, 1090.2) = 4 56 18.12 -66 27 21.1
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 10.7 +/- 4.1
  Background counts = 5.8
  Rate = 0.0002 +/- 9e-05
[Sun Sep 25 22:43:09 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 22:43:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 22:43:09 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 22:43:09 2011] Source does appear to be extended
[Sun Sep 25 22:43:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 22:47:08 2011] Not overwriting source region fullrun_ccd3_acisf08468_pi14-548_pass1_cl_src14_src.reg
[Sun Sep 25 22:47:08 2011] Extracting stamp from image fullrun_ccd3_acisf08468_pi14-548_cl_sm2.00.img.gz, (650, 1073) - (685, 1107)
[Sun Sep 25 22:47:08 2011] Writing fullrun_ccd3_acisf08468_pi14-548_pass1_cl_src14.gif
[Sun Sep 25 22:47:59 2011] ../../acisf08468/products/events/fullrun_ccd3_acisf08468_pi14-548_pass1_cl_src14_src.evt and ../../acisf08468/products/events/fullrun_ccd3_acisf08468_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Sun Sep 25 22:47:59 2011] Size of ../../acisf08468/products/events/fullrun_ccd3_acisf08468_pi14-548_pass1_cl_src14_src.evt.gz[events] = 11 counts
[Sun Sep 25 22:47:59 2011] Mean chipx,y = (943.45, 664.45)
[Sun Sep 25 22:47:59 2011] Mean tdetx,y = (4467.55, 4004.45)
[Sun Sep 25 22:47:59 2011] chipx,y range = (926.00-958.00, 648.00-680.00)
[Sun Sep 25 22:47:59 2011] Size of ../../acisf08468/products/events/fullrun_ccd3_acisf08468_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 9 counts
[Sun Sep 25 22:47:59 2011] ../../acisf08468/products/images/fullrun_ccd3_acisf08468_pi14-548_pass1_cl_src14_src.img and ../../acisf08468/products/images/fullrun_ccd3_acisf08468_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Sun Sep 25 22:47:59 2011] ../../acisf08468/products/spectra/fullrun_ccd3_acisf08468_pi14-548_pass1_cl_src14_src.pi and ../../acisf08468/products/spectra/fullrun_ccd3_acisf08468_pi14-548_pass1_cl_src14_bgd.pi exist, delete to re-create
[Sun Sep 25 22:47:59 2011] Not generating rmf since there are only 10 counts
[Sun Sep 25 22:48:04 2011] ../../acisf08468/products/lightcurves/fullrun_ccd3_acisf08468_pi14-548_pass1_cl_src14_src.lc and ../../acisf08468/products/lightcurves/fullrun_ccd3_acisf08468_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Sun Sep 25 22:49:40 2011] 196.379
[Sun Sep 25 22:50:08 2011] Updating aperture counts using extracted products
[Sun Sep 25 22:50:08 2011] Error reading totcts from fullrun_ccd3_acisf08468_pi14-548_pass1_cl_src14_src.pi.gz
[Sun Sep 25 22:50:08 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 22:50:08 2011] Using photon index=1.80, rate=0.000227, arf fullrun_ccd3_acisf08468_pi14-548_pass1_cl_src14.arf
[Sun Sep 25 22:50:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 22:50:08 2011] Updating source flux to 2.6e-15
[Sun Sep 25 22:50:26 2011] Source 14 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Sep 25 22:50:27 2011] acisf08468/analysis//spectral/fullrun_ccd3_acisf08468_pi14-548_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete