[Sun Sep 25 22:40:49 2011] Detection parameters:
  Position = (313.6, 1031.8) = 4 55 24.15 -66 25 35.3
  Extent = 0.7" x 0.5", rotation angle = 147 degrees
  Source counts = 16.5 +/- 4.2
  Background counts = 1.5
  Rate = 0.0003 +/- 9e-05

[Sun Sep 25 22:40:52 2011] Off-axis axis estimate = 2.76'
[Sun Sep 25 22:42:08 2011] Using EEF radius (= 0.53 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 22:42:08 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Sun Sep 25 22:42:08 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.895
[Sun Sep 25 22:42:08 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.53"
[Sun Sep 25 22:42:09 2011] fullrun_ccd2_acisf08468_pi14-548_cl_pass0_src11.ximg exists
[Sun Sep 25 22:42:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08468_pi14-548_cl_pass0_src11.csv
[Sun Sep 25 22:42:09 2011] fullrun_ccd2_acisf08468_pi14-548_cl_pass0_src11_1.ximg exists
[Sun Sep 25 22:42:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08468_pi14-548_cl_pass0_src11.csv
[Sun Sep 25 22:42:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08468_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08468_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 22:42:09 2011] fullrun_ccd2_acisf08468_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sun Sep 25 22:42:09 2011] fullrun_ccd2_acisf08468_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Sep 25 22:42:09 2011] Fit fullrun_ccd2_acisf08468_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Sep 25 22:42:25 2011] Spatial fit model total counts = 20.839000, observed total counts = 21.000000
[Sun Sep 25 22:42:25 2011] Offset between fit and detection position for source 9 = 0.769241 pixels
[Sun Sep 25 22:42:25 2011] 20.502640 total counts/ 4.475840 bgd. counts: snr = 7.575469
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.769241 pixels
  Position = (314.3, 1032.1) = 4 55 24.13 -66 25 35.4
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 16.0 +/- 4.5
  Background counts = 4.5
  Rate = 0.0003 +/- 0.0001
[Sun Sep 25 22:42:25 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 22:42:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 22:42:25 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 22:42:25 2011] Source does appear to be extended
[Sun Sep 25 22:42:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 22:42:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 22:42:54 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Sun Sep 25 22:42:54 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.941
[Sun Sep 25 22:42:54 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.63"
[Sun Sep 25 22:42:55 2011] fullrun_ccd2_acisf08468_pi14-548_cl_pass1_src10.ximg exists
[Sun Sep 25 22:42:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08468_pi14-548_cl_pass1_src10.csv
[Sun Sep 25 22:42:55 2011] fullrun_ccd2_acisf08468_pi14-548_cl_pass1_src10_1.ximg exists
[Sun Sep 25 22:42:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08468_pi14-548_cl_pass1_src10.csv
[Sun Sep 25 22:42:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08468_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08468_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 22:42:55 2011] fullrun_ccd2_acisf08468_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sun Sep 25 22:42:55 2011] fullrun_ccd2_acisf08468_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Sep 25 22:42:55 2011] Fit fullrun_ccd2_acisf08468_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Sun Sep 25 22:43:07 2011] Spatial fit model total counts = 20.874900, observed total counts = 21.000000
[Sun Sep 25 22:43:07 2011] Offset between fit and detection position for source 9 = 0.016759 pixels
[Sun Sep 25 22:43:07 2011] 20.413000 total counts/ 4.211300 bgd. counts: snr = 7.895007
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.016759 pixels
  Position = (314.3, 1032.1) = 4 55 24.13 -66 25 35.4
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 16.2 +/- 4.5
  Background counts = 4.2
  Rate = 0.0003 +/- 0.0001
[Sun Sep 25 22:43:07 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 22:43:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 22:43:07 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 22:43:07 2011] Source does appear to be extended
[Sun Sep 25 22:43:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 22:45:36 2011] Not overwriting source region fullrun_ccd2_acisf08468_pi14-548_pass1_cl_src9_src.reg
[Sun Sep 25 22:45:36 2011] Extracting stamp from image fullrun_ccd2_acisf08468_pi14-548_cl_sm2.00.img.gz, (285, 1003) - (344, 1061)
[Sun Sep 25 22:45:36 2011] Writing fullrun_ccd2_acisf08468_pi14-548_pass1_cl_src9.gif
[Sun Sep 25 22:46:04 2011] ../../acisf08468/products/events/fullrun_ccd2_acisf08468_pi14-548_pass1_cl_src9_src.evt and ../../acisf08468/products/events/fullrun_ccd2_acisf08468_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Sun Sep 25 22:46:04 2011] Size of ../../acisf08468/products/events/fullrun_ccd2_acisf08468_pi14-548_pass1_cl_src9_src.evt.gz[events] = 17 counts
[Sun Sep 25 22:46:04 2011] Mean chipx,y = (38.35, 715.71)
[Sun Sep 25 22:46:04 2011] Mean tdetx,y = (3776.71, 4047.65)
[Sun Sep 25 22:46:04 2011] chipx,y range = (27.00-59.00, 698.00-731.00)
[Sun Sep 25 22:46:04 2011] Size of ../../acisf08468/products/events/fullrun_ccd2_acisf08468_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 17 counts
[Sun Sep 25 22:46:04 2011] ../../acisf08468/products/images/fullrun_ccd2_acisf08468_pi14-548_pass1_cl_src9_src.img and ../../acisf08468/products/images/fullrun_ccd2_acisf08468_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Sun Sep 25 22:46:04 2011] ../../acisf08468/products/spectra/fullrun_ccd2_acisf08468_pi14-548_pass1_cl_src9_src.pi and ../../acisf08468/products/spectra/fullrun_ccd2_acisf08468_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Sun Sep 25 22:46:04 2011] Not generating rmf since there are only 16 counts
[Sun Sep 25 22:46:06 2011] ../../acisf08468/products/lightcurves/fullrun_ccd2_acisf08468_pi14-548_pass1_cl_src9_src.lc and ../../acisf08468/products/lightcurves/fullrun_ccd2_acisf08468_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Sun Sep 25 22:47:05 2011] 200.108
[Sun Sep 25 22:50:07 2011] Updating aperture counts using extracted products
[Sun Sep 25 22:50:07 2011] Error reading totcts from fullrun_ccd2_acisf08468_pi14-548_pass1_cl_src9_src.pi.gz
[Sun Sep 25 22:50:07 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 22:50:07 2011] Using photon index=1.80, rate=0.000342, arf fullrun_ccd2_acisf08468_pi14-548_pass1_cl_src9.arf
[Sun Sep 25 22:50:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 22:50:07 2011] Updating source flux to 3.8e-15
[Sun Sep 25 22:50:25 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Sep 25 22:50:26 2011] acisf08468/analysis//spectral/fullrun_ccd2_acisf08468_pi14-548_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete