[Sun Sep 25 22:40:47 2011] Detection parameters:
  Position = (485.1, 1048.1) = 4 56 54.46 -66 19 15.2
  Extent = 2.3" x 1.2", rotation angle = 38 degrees
  Source counts = 10.7 +/- 4.2
  Background counts = 7.3
  Rate = 0.0002 +/- 9e-05

[Sun Sep 25 22:40:48 2011] Off-axis axis estimate = 9.71'
[Sun Sep 25 22:42:05 2011] Using EEF radius (= 4.17 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 22:42:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 22:42:05 2011] Initial guess for spatial extent in simple fitting = 4.17"
[Sun Sep 25 22:42:05 2011] source mask rpix=8.5, npix_max = 322, mask sum = 324, frac = 1.004
[Sun Sep 25 22:42:05 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 4.17"
[Sun Sep 25 22:42:06 2011] fullrun_ccd1_acisf08468_pi14-548_cl_pass0_src17.ximg exists
[Sun Sep 25 22:42:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08468_pi14-548_cl_pass0_src17.csv
[Sun Sep 25 22:42:06 2011] fullrun_ccd1_acisf08468_pi14-548_cl_pass0_src17_1.ximg exists
[Sun Sep 25 22:42:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08468_pi14-548_cl_pass0_src17.csv
[Sun Sep 25 22:42:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf08468_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf08468_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 22:42:08 2011] fullrun_ccd1_acisf08468_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Sun Sep 25 22:42:08 2011] fullrun_ccd1_acisf08468_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Sun Sep 25 22:42:08 2011] Fit fullrun_ccd1_acisf08468_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Sun Sep 25 22:42:22 2011] Spatial fit model total counts = 43.736300, observed total counts = 43.000000
[Sun Sep 25 22:42:22 2011] Offset between fit and detection position for source 16 = 3.998191 pixels
[Sun Sep 25 22:42:22 2011] 43.188420 total counts/ 35.229500 bgd. counts: snr = 1.340914
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 3.998191 pixels
  Position = (487.7, 1051.1) = 4 56 54.29 -66 19 13.9
  Extent = 1.0" x 1.0", rotation angle = 0
  Source counts = 8.0 +/- 6.6
  Background counts = 35.2
  Rate = 0.0002 +/- 0.0001
  Deleting source due to low Poisson probability