[Thu Oct 27 20:22:35 2011] Detection parameters:
  Position = (1019.2, 845.4) = 18 20 27.30 -16 4 21.1
  Extent = 1.3" x 1.0", rotation angle = 57 degrees
  Source counts = 22.8 +/- 5.3
  Background counts = 5.2
  Rate = 0.0008 +/- 0.0002

[Thu Oct 27 20:22:42 2011] Off-axis axis estimate = 6.68'
[Thu Oct 27 20:24:58 2011] Using EEF radius (= 2.00 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 20:24:58 2011] Initial guess for spatial extent in simple fitting = 2.00"
[Thu Oct 27 20:24:58 2011] source mask rpix=4.1, npix_max = 83, mask sum = 81, frac = 0.975
[Thu Oct 27 20:24:58 2011] Giving source the simple spatial ID 87 for pass 0, mean size = 2.00"
[Thu Oct 27 20:25:04 2011] fullrun_ccd3_acisf08460_pi14-548_cl_pass0_src87.ximg exists
[Thu Oct 27 20:25:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08460_pi14-548_cl_pass0_src87.csv
[Thu Oct 27 20:25:04 2011] fullrun_ccd3_acisf08460_pi14-548_cl_pass0_src87_1.ximg exists
[Thu Oct 27 20:25:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08460_pi14-548_cl_pass0_src87.csv
[Thu Oct 27 20:25:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08460_pi14-548_cl_pass0_src87_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08460_pi14-548_cl_pass0_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 20:25:11 2011] fullrun_ccd3_acisf08460_pi14-548_cl_pass0_tfrozen_src87.ximg exists
[Thu Oct 27 20:25:11 2011] fullrun_ccd3_acisf08460_pi14-548_cl_pass0_tfrozen_src87_1.ximg exists
[Thu Oct 27 20:25:11 2011] Fit fullrun_ccd3_acisf08460_pi14-548_cl_pass0_tfrozen_src87 appears to have run properly
[Thu Oct 27 20:26:05 2011] Spatial fit model total counts = 37.227500, observed total counts = 39.000000
[Thu Oct 27 20:26:05 2011] Offset between fit and detection position for source 87 = 0.244473 pixels
[Thu Oct 27 20:26:05 2011] 38.916700 total counts/ 18.058300 bgd. counts: snr = 4.908430
Spatial fit parameters:
  Offset between fit and detection position for source 87 = 0.244473 pixels
  Position = (1019.3, 845.2) = 18 20 27.32 -16 4 21.4
  Extent = 1.4 (0.8-2.0)", rotation angle = 0
  Source counts = 20.9 +/- 6.2
  Background counts = 18.1
  Rate = 0.0007 +/- 0.0002
[Thu Oct 27 20:26:05 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 20:26:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 20:26:05 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 20:26:05 2011] Source does appear to be extended
[Thu Oct 27 20:26:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 20:27:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 20:27:02 2011] Initial guess for spatial extent in simple fitting = 1.36"
[Thu Oct 27 20:27:02 2011] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.986
[Thu Oct 27 20:27:02 2011] Giving source the simple spatial ID 86 for pass 1, mean size = 1.36"
[Thu Oct 27 20:27:10 2011] fullrun_ccd3_acisf08460_pi14-548_cl_pass1_src86.ximg exists
[Thu Oct 27 20:27:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08460_pi14-548_cl_pass1_src86.csv
[Thu Oct 27 20:27:10 2011] fullrun_ccd3_acisf08460_pi14-548_cl_pass1_src86_1.ximg exists
[Thu Oct 27 20:27:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08460_pi14-548_cl_pass1_src86.csv
[Thu Oct 27 20:27:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08460_pi14-548_cl_pass1_src86_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08460_pi14-548_cl_pass1_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 20:27:14 2011] fullrun_ccd3_acisf08460_pi14-548_cl_pass1_tfrozen_src86.ximg exists
[Thu Oct 27 20:27:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08460_pi14-548_cl_pass1_tfrozen_src86.csv
[Thu Oct 27 20:27:14 2011] fullrun_ccd3_acisf08460_pi14-548_cl_pass1_tfrozen_src86_1.ximg exists
[Thu Oct 27 20:27:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08460_pi14-548_cl_pass1_tfrozen_src86.csv
[Thu Oct 27 20:27:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08460_pi14-548_cl_pass1_tfrozen_src86_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08460_pi14-548_cl_pass1_tfrozen_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 20:28:07 2011] Spatial fit model total counts = 26.889000, observed total counts = 29.000000
[Thu Oct 27 20:28:07 2011] Offset between fit and detection position for source 87 = 0.613854 pixels
[Thu Oct 27 20:28:07 2011] 27.944624 total counts/ 0.003924 bgd. counts: snr = 446.052021
Spatial fit parameters:
  Offset between fit and detection position for source 87 = 0.613854 pixels
  Position = (1019.1, 844.6) = 18 20 27.32 -16 4 21.7
  Extent = 1.6 (0.6-2.2)", rotation angle = 0
  Source counts = 27.9 +/- 5.3
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Thu Oct 27 20:28:07 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 20:28:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 20:28:07 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 20:28:07 2011] Source does appear to be extended
[Thu Oct 27 20:28:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 21:01:01 2011] Not overwriting source region fullrun_ccd3_acisf08460_pi14-548_pass1_cl_src87_src.reg
[Thu Oct 27 21:01:01 2011] Extracting stamp from image fullrun_ccd3_acisf08460_pi14-548_cl_sm2.00.img.gz, (944, 770) - (1094, 919)
[Thu Oct 27 21:01:01 2011] Writing fullrun_ccd3_acisf08460_pi14-548_pass1_cl_src87.gif
[Thu Oct 27 21:11:26 2011] ../../acisf08460/products/events/fullrun_ccd3_acisf08460_pi14-548_pass1_cl_src87_src.evt and ../../acisf08460/products/events/fullrun_ccd3_acisf08460_pi14-548_pass1_cl_src87_bgd.evt exist, delete to re-create
[Thu Oct 27 21:11:26 2011] Size of ../../acisf08460/products/events/fullrun_ccd3_acisf08460_pi14-548_pass1_cl_src87_src.evt.gz[events] = 35 counts
[Thu Oct 27 21:11:26 2011] Mean chipx,y = (909.63, 190.43)
[Thu Oct 27 21:11:26 2011] Mean tdetx,y = (4941.57, 3970.63)
[Thu Oct 27 21:11:26 2011] chipx,y range = (888.00-925.00, 170.00-211.00)
[Thu Oct 27 21:11:26 2011] Size of ../../acisf08460/products/events/fullrun_ccd3_acisf08460_pi14-548_pass1_cl_src87_bgd.evt.gz[events] = 100 counts
[Thu Oct 27 21:11:26 2011] ../../acisf08460/products/images/fullrun_ccd3_acisf08460_pi14-548_pass1_cl_src87_src.img and ../../acisf08460/products/images/fullrun_ccd3_acisf08460_pi14-548_pass1_cl_src87_bgd.img exist, delete to re-create
[Thu Oct 27 21:11:26 2011] Not generating rmf since there are only 27 counts
[Thu Oct 27 21:11:26 2011] arf not found, will run specextract
[Thu Oct 27 21:11:28 2011] ../../acisf08460/products/spectra/fullrun_ccd3_acisf08460_pi14-548_pass1_cl_src87_bkg.pi not found
[Thu Oct 27 21:11:28 2011] ../../acisf08460/products/spectra/fullrun_ccd3_acisf08460_pi14-548_pass1_cl_src87.warf not found
[Thu Oct 27 21:11:28 2011] ../../acisf08460/products/spectra/fullrun_ccd3_acisf08460_pi14-548_pass1_cl_src87.wrmf not found
[Thu Oct 27 21:11:28 2011] Removal of ../../acisf08460/products/spectra/fullrun_ccd3_acisf08460_pi14-548_pass1_cl_src87.soff failed
[Thu Oct 27 21:11:28 2011] Failed to rename ../../acisf08460/products/spectra/fullrun_ccd3_acisf08460_pi14-548_pass1_cl_src87_grp.pi to ../../acisf08460/products/spectra/fullrun_ccd3_acisf08460_pi14-548_pass1_cl_src87_src.pi
[Thu Oct 27 21:11:33 2011] ../../acisf08460/products/lightcurves/fullrun_ccd3_acisf08460_pi14-548_pass1_cl_src87_src.lc and ../../acisf08460/products/lightcurves/fullrun_ccd3_acisf08460_pi14-548_pass1_cl_src87_bgd.lc exist, delete to re-create
[Thu Oct 27 21:17:55 2011] No arf file found
[Thu Oct 27 21:18:48 2011] Updating aperture counts using extracted products
[Thu Oct 27 21:18:48 2011] Error reading totcts from fullrun_ccd3_acisf08460_pi14-548_pass1_cl_src87_src.pi
[Thu Oct 27 21:18:49 2011] No arf file for this source, not re-computing flux
[Thu Oct 27 21:19:02 2011] Source 87 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Oct 27 21:19:03 2011] acisf08460/analysis//spectral/fullrun_ccd3_acisf08460_pi14-548_pass1_cl_src87_pl.csv not found, spectral fit skipped or did not complete