[Thu Oct 27 20:22:23 2011] Detection parameters:
  Position = (1096.8, 678.7) = 18 20 29.67 -16 14 7.4
  Extent = 0.6" x 0.5", rotation angle = 115 degrees
  Source counts = 14.7 +/- 4.0
  Background counts = 1.3
  Rate = 0.0005 +/- 0.0001

[Thu Oct 27 20:22:29 2011] Off-axis axis estimate = 3.11'
[Thu Oct 27 20:24:55 2011] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 20:24:55 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Thu Oct 27 20:24:55 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.008
[Thu Oct 27 20:24:55 2011] Giving source the simple spatial ID 46 for pass 0, mean size = 0.60"
[Thu Oct 27 20:24:57 2011] fullrun_ccd2_acisf08460_pi14-548_cl_pass0_src46.ximg exists
[Thu Oct 27 20:24:57 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf08460_pi14-548_cl_pass0_src46.csv
[Thu Oct 27 20:24:57 2011] fullrun_ccd2_acisf08460_pi14-548_cl_pass0_src46_1.ximg exists
[Thu Oct 27 20:24:57 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf08460_pi14-548_cl_pass0_src46.csv
[Thu Oct 27 20:24:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08460_pi14-548_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08460_pi14-548_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 20:24:58 2011] fullrun_ccd2_acisf08460_pi14-548_cl_pass0_tfrozen_src46.ximg exists
[Thu Oct 27 20:24:58 2011] fullrun_ccd2_acisf08460_pi14-548_cl_pass0_tfrozen_src46_1.ximg exists
[Thu Oct 27 20:24:58 2011] Fit fullrun_ccd2_acisf08460_pi14-548_cl_pass0_tfrozen_src46 appears to have run properly
[Thu Oct 27 20:25:51 2011] Spatial fit model total counts = 18.565400, observed total counts = 19.000000
[Thu Oct 27 20:25:51 2011] Offset between fit and detection position for source 2 = 1.027917 pixels
[Thu Oct 27 20:25:51 2011] 18.388440 total counts/ 5.595740 bgd. counts: snr = 5.407960
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.027917 pixels
  Position = (1097.8, 679.1) = 18 20 29.66 -16 14 7.5
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 12.8 +/- 4.3
  Background counts = 5.6
  Rate = 0.0004 +/- 0.0001
[Thu Oct 27 20:25:51 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 20:25:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 20:25:51 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 20:25:51 2011] Source does appear to be extended
[Thu Oct 27 20:25:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 20:26:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 20:26:58 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Thu Oct 27 20:26:58 2011] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.834
[Thu Oct 27 20:26:58 2011] Giving source the simple spatial ID 45 for pass 1, mean size = 0.41"
[Thu Oct 27 20:27:00 2011] fullrun_ccd2_acisf08460_pi14-548_cl_pass1_src45.ximg exists
[Thu Oct 27 20:27:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08460_pi14-548_cl_pass1_src45.csv
[Thu Oct 27 20:27:00 2011] fullrun_ccd2_acisf08460_pi14-548_cl_pass1_src45_1.ximg exists
[Thu Oct 27 20:27:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08460_pi14-548_cl_pass1_src45.csv
[Thu Oct 27 20:27:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08460_pi14-548_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08460_pi14-548_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 20:27:01 2011] fullrun_ccd2_acisf08460_pi14-548_cl_pass1_tfrozen_src45.ximg exists
[Thu Oct 27 20:27:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08460_pi14-548_cl_pass1_tfrozen_src45.csv
[Thu Oct 27 20:27:01 2011] fullrun_ccd2_acisf08460_pi14-548_cl_pass1_tfrozen_src45_1.ximg exists
[Thu Oct 27 20:27:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08460_pi14-548_cl_pass1_tfrozen_src45.csv
[Thu Oct 27 20:27:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08460_pi14-548_cl_pass1_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08460_pi14-548_cl_pass1_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 20:27:53 2011] Spatial fit model total counts = 16.027200, observed total counts = 19.000000
[Thu Oct 27 20:27:53 2011] Offset between fit and detection position for source 2 = 0.089689 pixels
[Thu Oct 27 20:27:53 2011] 15.548610 total counts/ 3.016110 bgd. counts: snr = 7.216292
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.089689 pixels
  Position = (1097.8, 679.0) = 18 20 29.65 -16 14 7.5
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 12.5 +/- 3.9
  Background counts = 3.0
  Rate = 0.0004 +/- 0.0001
[Thu Oct 27 20:27:53 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 20:27:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 20:27:53 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 20:27:53 2011] Source does appear to be extended
[Thu Oct 27 20:27:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 20:52:38 2011] Not overwriting source region fullrun_ccd2_acisf08460_pi14-548_pass1_cl_src2_src.reg
[Thu Oct 27 20:52:38 2011] Extracting stamp from image fullrun_ccd2_acisf08460_pi14-548_cl_sm2.00.img.gz, (1080, 661) - (1116, 697)
[Thu Oct 27 20:52:38 2011] Writing fullrun_ccd2_acisf08460_pi14-548_pass1_cl_src2.gif
[Thu Oct 27 20:57:57 2011] ../../acisf08460/products/events/fullrun_ccd2_acisf08460_pi14-548_pass1_cl_src2_src.evt and ../../acisf08460/products/events/fullrun_ccd2_acisf08460_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Thu Oct 27 20:57:57 2011] Size of ../../acisf08460/products/events/fullrun_ccd2_acisf08460_pi14-548_pass1_cl_src2_src.evt.gz[events] = 13 counts
[Thu Oct 27 20:57:57 2011] Mean chipx,y = (16.31, 686.31)
[Thu Oct 27 20:57:57 2011] Mean tdetx,y = (3747.31, 4069.69)
[Thu Oct 27 20:57:57 2011] chipx,y range = (3.00-29.00, 665.00-702.00)
[Thu Oct 27 20:57:57 2011] Size of ../../acisf08460/products/events/fullrun_ccd2_acisf08460_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 7 counts
[Thu Oct 27 20:57:57 2011] ../../acisf08460/products/images/fullrun_ccd2_acisf08460_pi14-548_pass1_cl_src2_src.img and ../../acisf08460/products/images/fullrun_ccd2_acisf08460_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Thu Oct 27 20:57:57 2011] Not generating rmf since there are only 12 counts
[Thu Oct 27 20:57:57 2011] arf not found, will run specextract
[Thu Oct 27 20:57:59 2011] ../../acisf08460/products/spectra/fullrun_ccd2_acisf08460_pi14-548_pass1_cl_src2_bkg.pi not found
[Thu Oct 27 20:57:59 2011] ../../acisf08460/products/spectra/fullrun_ccd2_acisf08460_pi14-548_pass1_cl_src2.warf not found
[Thu Oct 27 20:57:59 2011] ../../acisf08460/products/spectra/fullrun_ccd2_acisf08460_pi14-548_pass1_cl_src2.wrmf not found
[Thu Oct 27 20:57:59 2011] Removal of ../../acisf08460/products/spectra/fullrun_ccd2_acisf08460_pi14-548_pass1_cl_src2.soff failed
[Thu Oct 27 20:57:59 2011] Failed to rename ../../acisf08460/products/spectra/fullrun_ccd2_acisf08460_pi14-548_pass1_cl_src2_grp.pi to ../../acisf08460/products/spectra/fullrun_ccd2_acisf08460_pi14-548_pass1_cl_src2_src.pi
[Thu Oct 27 20:58:04 2011] ../../acisf08460/products/lightcurves/fullrun_ccd2_acisf08460_pi14-548_pass1_cl_src2_src.lc and ../../acisf08460/products/lightcurves/fullrun_ccd2_acisf08460_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Thu Oct 27 21:00:58 2011] No arf file found
[Thu Oct 27 21:18:47 2011] Updating aperture counts using extracted products
[Thu Oct 27 21:18:47 2011] Error reading totcts from fullrun_ccd2_acisf08460_pi14-548_pass1_cl_src2_src.pi
[Thu Oct 27 21:18:47 2011] No arf file for this source, not re-computing flux
[Thu Oct 27 21:19:01 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Oct 27 21:19:02 2011] acisf08460/analysis//spectral/fullrun_ccd2_acisf08460_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete