[Sat Oct 29 06:51:06 2011] Detection parameters:
  Position = (742.2, 710.2) = 21 44 40.90 38 19 14.8
  Extent = 0.5" x 0.5", rotation angle = 124 degrees
  Source counts = 349.2 +/- 22.1
  Background counts = 140.8
  Rate = 0.06 +/- 0.004

[Sat Oct 29 06:51:15 2011] Off-axis axis estimate = 2.51'
[Sat Oct 29 06:52:28 2011] Using EEF radius (= 0.49 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 06:52:28 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Sat Oct 29 06:52:28 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.994
[Sat Oct 29 06:52:28 2011] Giving source the simple spatial ID 76 for pass 0, mean size = 0.49"
[Sat Oct 29 06:52:33 2011] fullrun_ccd7_acisf08444_pi14-548_cl_pass0_src76.ximg exists
[Sat Oct 29 06:52:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf08444_pi14-548_cl_pass0_src76.csv
[Sat Oct 29 06:52:33 2011] fullrun_ccd7_acisf08444_pi14-548_cl_pass0_src76_1.ximg exists
[Sat Oct 29 06:52:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf08444_pi14-548_cl_pass0_src76.csv
[Sat Oct 29 06:52:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf08444_pi14-548_cl_pass0_src76_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf08444_pi14-548_cl_pass0_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 06:52:37 2011] fullrun_ccd7_acisf08444_pi14-548_cl_pass0_tfrozen_src76.ximg exists
[Sat Oct 29 06:52:37 2011] fullrun_ccd7_acisf08444_pi14-548_cl_pass0_tfrozen_src76_1.ximg exists
[Sat Oct 29 06:52:37 2011] Fit fullrun_ccd7_acisf08444_pi14-548_cl_pass0_tfrozen_src76 appears to have run properly
[Sat Oct 29 06:52:57 2011] Warning, spatial fit 76 centroid is now closest to src. 6
[Sat Oct 29 06:52:57 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 06:52:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 06:52:57 2011] Assessing source extent using major
[Sat Oct 29 06:52:57 2011] Source does appear to be extended
[Sat Oct 29 06:52:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 06:52:57 2011] Source is confused with source 1
[Sat Oct 29 06:53:17 2011] Using EEF radius (= 0.49 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 06:53:17 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Sat Oct 29 06:53:17 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.994
[Sat Oct 29 06:53:17 2011] Giving source the simple spatial ID 80 for pass 1, mean size = 0.49"
[Sat Oct 29 06:53:22 2011] fullrun_ccd7_acisf08444_pi14-548_cl_pass1_src80.ximg exists
[Sat Oct 29 06:53:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf08444_pi14-548_cl_pass1_src80.csv
[Sat Oct 29 06:53:22 2011] fullrun_ccd7_acisf08444_pi14-548_cl_pass1_src80_1.ximg exists
[Sat Oct 29 06:53:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf08444_pi14-548_cl_pass1_src80.csv
[Sat Oct 29 06:53:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf08444_pi14-548_cl_pass1_src80_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf08444_pi14-548_cl_pass1_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 06:53:25 2011] fullrun_ccd7_acisf08444_pi14-548_cl_pass1_tfrozen_src80.ximg exists
[Sat Oct 29 06:53:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf08444_pi14-548_cl_pass1_tfrozen_src80.csv
[Sat Oct 29 06:53:25 2011] fullrun_ccd7_acisf08444_pi14-548_cl_pass1_tfrozen_src80_1.ximg exists
[Sat Oct 29 06:53:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf08444_pi14-548_cl_pass1_tfrozen_src80.csv
[Sat Oct 29 06:53:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf08444_pi14-548_cl_pass1_tfrozen_src80_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf08444_pi14-548_cl_pass1_tfrozen_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 06:53:46 2011] Spatial fit model total counts = 11983.000000, observed total counts = 12068.000000
[Sat Oct 29 06:53:46 2011] Offset between fit and detection position for source 72 = 2.944399 pixels
[Sat Oct 29 06:53:46 2011] Warning, changing simple spatial fit ID from 80 to 2
[Sat Oct 29 06:53:46 2011] 7827.680000 total counts/ 2267.320000 bgd. counts: snr = 116.774093
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 2.944399 pixels
  Position = (744.7, 711.8) = 21 44 40.82 38 19 15.3
  Extent = 3.0 (3.0-6.0)" x 1.1 (1.1-1.2)", rotation angle = 308 (307-309) degrees
  Source counts = 5560.4 +/- 88.5
  Background counts = 2267.3
  Rate = 0.9 +/- 0.01
[Sat Oct 29 06:53:46 2011] Spatial fit model total counts = 9411.890000, observed total counts = 8985.000000
[Sat Oct 29 06:53:46 2011] Offset between fit and detection position for source 72 = 1.653744 pixels
[Sat Oct 29 06:53:46 2011] Warning, changing simple spatial fit ID from 2 to 31
[Sat Oct 29 06:53:46 2011] 5501.200000 total counts/ 1506.190000 bgd. counts: snr = 102.938537
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 1.653744 pixels
  Position = (746.2, 711.0) = 21 44 40.76 38 19 14.9
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 3995.0 +/- 74.2
  Background counts = 1506.2
  Rate = 0.7 +/- 0.01
[Sat Oct 29 06:53:47 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 06:53:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 06:53:47 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 06:53:47 2011] Source does appear to be extended
[Sat Oct 29 06:53:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 06:54:21 2011] Not overwriting source region fullrun_ccd7_acisf08444_pi14-548_pass1_cl_src72_src.reg
[Sat Oct 29 06:54:21 2011] Extracting stamp from image fullrun_ccd7_acisf08444_pi14-548_cl_sm2.00.img.gz, (678, 642) - (815, 780)
[Sat Oct 29 06:54:21 2011] Writing fullrun_ccd7_acisf08444_pi14-548_pass1_cl_src72.gif
[Sat Oct 29 06:58:12 2011] ../../acisf08444/products/events/fullrun_ccd7_acisf08444_pi14-548_pass1_cl_src72_src.evt and ../../acisf08444/products/events/fullrun_ccd7_acisf08444_pi14-548_pass1_cl_src72_bgd.evt exist, delete to re-create
[Sat Oct 29 06:58:12 2011] Size of ../../acisf08444/products/events/fullrun_ccd7_acisf08444_pi14-548_pass1_cl_src72_src.evt.gz[events] = 14936 counts
[Sat Oct 29 06:58:12 2011] Mean chipx,y = (496.40, 493.57)
[Sat Oct 29 06:58:12 2011] Mean tdetx,y = (4413.40, 2195.57)
[Sat Oct 29 06:58:12 2011] chipx,y range = (468.00-525.00, 465.00-522.00)
[Sat Oct 29 06:58:12 2011] Size of ../../acisf08444/products/events/fullrun_ccd7_acisf08444_pi14-548_pass1_cl_src72_bgd.evt.gz[events] = 12269 counts
[Sat Oct 29 06:58:12 2011] ../../acisf08444/products/images/fullrun_ccd7_acisf08444_pi14-548_pass1_cl_src72_src.img and ../../acisf08444/products/images/fullrun_ccd7_acisf08444_pi14-548_pass1_cl_src72_bgd.img exist, delete to re-create
[Sat Oct 29 06:58:12 2011] ../../acisf08444/products/spectra/fullrun_ccd7_acisf08444_pi14-548_pass1_cl_src72_src.pi and ../../acisf08444/products/spectra/fullrun_ccd7_acisf08444_pi14-548_pass1_cl_src72_bgd.pi exist, delete to re-create
[Sat Oct 29 06:58:15 2011] ../../acisf08444/products/lightcurves/fullrun_ccd7_acisf08444_pi14-548_pass1_cl_src72_src.lc and ../../acisf08444/products/lightcurves/fullrun_ccd7_acisf08444_pi14-548_pass1_cl_src72_bgd.lc exist, delete to re-create
[Sat Oct 29 07:01:54 2011] Keeping rmf generated by specextract
[Sat Oct 29 07:01:54 2011] 212.785
[Sat Oct 29 07:02:01 2011] Updating aperture counts using extracted products
[Sat Oct 29 07:02:01 2011] Error reading totcts from fullrun_ccd7_acisf08444_pi14-548_pass1_cl_src72_src.pi.gz
[Sat Oct 29 07:02:03 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 07:02:03 2011] Using photon index=1.80, rate=0.67, arf fullrun_ccd7_acisf08444_pi14-548_pass1_cl_src72.arf
[Sat Oct 29 07:02:03 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 07:02:03 2011] Updating source flux to 5.8e-12
[Sat Oct 29 07:02:13 2011] Flag c found in src. 72 procflags, skipping spectral fitting