[Tue Aug 7 23:57:28 2012] Detection parameters: Position = (400.2, 821.2) = 10 27 59.87 -43 54 43.7 Extent = 0.6" x 0.5", rotation angle = 65 degrees Source counts = 11.2 +/- 3.9 Background counts = 3.8 Rate = 0.0004 +/- 0.0001 [Tue Aug 7 23:57:30 2012] Off-axis axis estimate = 1.35' [Tue Aug 7 23:58:22 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting [Tue Aug 7 23:58:22 2012] Initial guess for spatial extent in simple fitting = 0.39" [Tue Aug 7 23:58:22 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.908 [Tue Aug 7 23:58:22 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 0.39" [Tue Aug 7 23:58:24 2012] fullrun_ccd7_acisf00835_pi14-548_cl_pass0_src38.ximg exists [Tue Aug 7 23:58:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00835_pi14-548_cl_pass0_src38.csv [Tue Aug 7 23:58:24 2012] fullrun_ccd7_acisf00835_pi14-548_cl_pass0_src38_1.ximg exists [Tue Aug 7 23:58:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00835_pi14-548_cl_pass0_src38.csv [Tue Aug 7 23:58:24 2012] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf00835_pi14-548_cl_pass0_src38_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf00835_pi14-548_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Aug 7 23:58:25 2012] fullrun_ccd7_acisf00835_pi14-548_cl_pass0_tfrozen_src38.ximg exists [Tue Aug 7 23:58:25 2012] fullrun_ccd7_acisf00835_pi14-548_cl_pass0_tfrozen_src38_1.ximg exists [Tue Aug 7 23:58:25 2012] Fit fullrun_ccd7_acisf00835_pi14-548_cl_pass0_tfrozen_src38 appears to have run properly [Tue Aug 7 23:58:36 2012] Spatial fit model total counts = 13.370200, observed total counts = 14.000000 [Tue Aug 7 23:58:36 2012] Offset between fit and detection position for source 34 = 0.291001 pixels [Tue Aug 7 23:58:36 2012] 14.526910 total counts/ 9.659660 bgd. counts: snr = 1.566040 Spatial fit parameters: Offset between fit and detection position for source 34 = 0.291001 pixels Position = (400.4, 821.4) = 10 27 59.88 -43 54 43.8 Extent = 0.1 (0.1-0.2)", rotation angle = 0 Source counts = 4.9 +/- 3.8 Background counts = 9.7 Rate = 0.0002 +/- 0.0002 Deleting source due to low Poisson probability