[Wed Sep 28 09:58:57 2011] Detection parameters: Position = (600.6, 382.1) = 12 19 23.21 5 49 29.9 Extent = 1.1" x 1.1", rotation angle = 64 degrees Source counts = 4972.3 +/- 74.0 Background counts = 509.7 Rate = 0.1 +/- 0.002 [Wed Sep 28 09:59:02 2011] Off-axis axis estimate = 0.61' [Wed Sep 28 09:59:48 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting [Wed Sep 28 09:59:48 2011] Initial guess for spatial extent in simple fitting = 0.39" [Wed Sep 28 09:59:48 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.904 [Wed Sep 28 09:59:48 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.39" [Wed Sep 28 09:59:49 2011] fullrun_ccd7_acisf00834_pi14-548_cl_pass0_src1.ximg exists [Wed Sep 28 09:59:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00834_pi14-548_cl_pass0_src1.csv [Wed Sep 28 09:59:49 2011] fullrun_ccd7_acisf00834_pi14-548_cl_pass0_src1_1.ximg exists [Wed Sep 28 09:59:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00834_pi14-548_cl_pass0_src1.csv [Wed Sep 28 09:59:49 2011] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf00834_pi14-548_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf00834_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Sep 28 09:59:52 2011] fullrun_ccd7_acisf00834_pi14-548_cl_pass0_tfrozen_src1.ximg exists [Wed Sep 28 09:59:52 2011] fullrun_ccd7_acisf00834_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists [Wed Sep 28 09:59:52 2011] Fit fullrun_ccd7_acisf00834_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly [Wed Sep 28 10:00:06 2011] Source 2 is offset by -0.928740 and -0.380636 pixels which is larger than 2 X fitted extent = 0.463792 x 0.463792, not incorporating fit results [Wed Sep 28 10:00:06 2011] Vigneting correction estimate = 1.000000 [Wed Sep 28 10:00:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Sep 28 10:00:06 2011] Assessing source extent using major [Wed Sep 28 10:00:06 2011] Source does appear to be extended [Wed Sep 28 10:00:06 2011] Computing asymmetry using major and minor axis, asym = 1.07 [Wed Sep 28 10:00:18 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting [Wed Sep 28 10:00:18 2011] Initial guess for spatial extent in simple fitting = 0.39" [Wed Sep 28 10:00:18 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.904 [Wed Sep 28 10:00:18 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.39" [Wed Sep 28 10:00:22 2011] fullrun_ccd7_acisf00834_pi14-548_cl_pass1_src1.ximg exists [Wed Sep 28 10:00:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00834_pi14-548_cl_pass1_src1.csv [Wed Sep 28 10:00:22 2011] fullrun_ccd7_acisf00834_pi14-548_cl_pass1_src1_1.ximg exists [Wed Sep 28 10:00:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00834_pi14-548_cl_pass1_src1.csv [Wed Sep 28 10:00:22 2011] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf00834_pi14-548_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf00834_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Sep 28 10:00:23 2011] fullrun_ccd7_acisf00834_pi14-548_cl_pass1_tfrozen_src1.ximg exists [Wed Sep 28 10:00:23 2011] fullrun_ccd7_acisf00834_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists [Wed Sep 28 10:00:23 2011] Fit fullrun_ccd7_acisf00834_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly [Wed Sep 28 10:00:34 2011] Spatial fit model total counts = 4325.000000, observed total counts = 4325.000000 [Wed Sep 28 10:00:34 2011] Offset between fit and detection position for source 2 = 0.698951 pixels [Wed Sep 28 10:00:34 2011] 4339.410000 total counts/ 1703.150000 bgd. counts: snr = 63.879542 Spatial fit parameters: Offset between fit and detection position for source 2 = 0.698951 pixels Position = (601.2, 382.5) = 12 19 23.21 5 49 29.9 Extent = 0.9 (0.9-1.0)", rotation angle = 0 Source counts = 2636.3 +/- 65.9 Background counts = 1703.2 Rate = 0.08 +/- 0.002 [Wed Sep 28 10:00:34 2011] Vigneting correction estimate = 1.000000 [Wed Sep 28 10:00:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Sep 28 10:00:34 2011] Assessing source extent using major axis lower bound [Wed Sep 28 10:00:34 2011] Source does appear to be extended [Wed Sep 28 10:00:34 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Sep 28 10:01:10 2011] Not overwriting source region fullrun_ccd7_acisf00834_pi14-548_pass1_cl_src2_src.reg [Wed Sep 28 10:01:10 2011] Extracting stamp from image fullrun_ccd7_acisf00834_pi14-548_cl_sm2.00.img.gz, (559, 340) - (643, 425) [Wed Sep 28 10:01:10 2011] Writing fullrun_ccd7_acisf00834_pi14-548_pass1_cl_src2.gif [Wed Sep 28 10:01:13 2011] ../../acisf00834/products/events/fullrun_ccd7_acisf00834_pi14-548_pass1_cl_src2_src.evt and ../../acisf00834/products/events/fullrun_ccd7_acisf00834_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create [Wed Sep 28 10:01:13 2011] Size of ../../acisf00834/products/events/fullrun_ccd7_acisf00834_pi14-548_pass1_cl_src2_src.evt.gz[events] = 3974 counts [Wed Sep 28 10:01:13 2011] Mean chipx,y = (288.52, 509.69) [Wed Sep 28 10:01:13 2011] Mean tdetx,y = (4205.52, 2211.69) [Wed Sep 28 10:01:13 2011] chipx,y range = (264.00-312.00, 486.00-536.00) [Wed Sep 28 10:01:13 2011] Size of ../../acisf00834/products/events/fullrun_ccd7_acisf00834_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 1686 counts [Wed Sep 28 10:01:13 2011] ../../acisf00834/products/images/fullrun_ccd7_acisf00834_pi14-548_pass1_cl_src2_src.img and ../../acisf00834/products/images/fullrun_ccd7_acisf00834_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create [Wed Sep 28 10:01:13 2011] ../../acisf00834/products/spectra/fullrun_ccd7_acisf00834_pi14-548_pass1_cl_src2_src.pi and ../../acisf00834/products/spectra/fullrun_ccd7_acisf00834_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create [Wed Sep 28 10:01:15 2011] ../../acisf00834/products/lightcurves/fullrun_ccd7_acisf00834_pi14-548_pass1_cl_src2_src.lc and ../../acisf00834/products/lightcurves/fullrun_ccd7_acisf00834_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create [Wed Sep 28 10:02:56 2011] Keeping rmf generated by specextract [Wed Sep 28 10:02:57 2011] 250.68 [Wed Sep 28 10:03:00 2011] Updating aperture counts using extracted products [Wed Sep 28 10:03:00 2011] Error reading totcts from fullrun_ccd7_acisf00834_pi14-548_pass1_cl_src2_src.pi.gz [Wed Sep 28 10:03:00 2011] Calculating source flux in energy range 0.30-8.00 [Wed Sep 28 10:03:00 2011] Using photon index=1.80, rate=0.0766, arf fullrun_ccd7_acisf00834_pi14-548_pass1_cl_src2.arf [Wed Sep 28 10:03:00 2011] Assuming count rate is from the 0.20-8.00 bandpass [Wed Sep 28 10:03:00 2011] Updating source flux to 4.2e-13 [Wed Sep 28 10:03:09 2011] Flag b found in src. 2 procflags, skipping spectral fitting [Wed Sep 28 10:03:27 2011] Reading fit data from acisf00834/analysis//spectral/fullrun_ccd7_acisf00834_pi14-548_pass1_cl_src2_pl.csv [Wed Sep 28 10:03:27 2011] Spectral fit parameter nH value = 1.15197e+22 [Wed Sep 28 10:03:27 2011] Spectral fit parameter PhoIndex value = 9.42898 [Wed Sep 28 10:03:27 2011] Failed to get F(0.3-8.0) from acisf00834/analysis//spectral/fullrun_ccd7_acisf00834_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected [Wed Sep 28 10:03:27 2011] Calculating source flux in energy range 0.30-8.00 [Wed Sep 28 10:03:27 2011] Using Nh = 1.2e+22, photon index=9.43, rate=0.0766, arf fullrun_ccd7_acisf00834_pi14-548_pass1_cl_src2.arf [Wed Sep 28 10:03:27 2011] Assuming count rate is from the 0.20-8.00 bandpass [Wed Sep 28 10:03:27 2011] Updating source flux to 2e-13