[Sun Oct 30 02:28:36 2011] Detection parameters:
  Position = (218.8, 709.8) = 13 49 19.43 4 3 48.7
  Extent = 0.5" x 0.5", rotation angle = 11 degrees
  Source counts = 35.3 +/- 6.0
  Background counts = 0.7
  Rate = 0.003 +/- 0.0005

[Sun Oct 30 02:28:38 2011] Off-axis axis estimate = 2.87'
[Sun Oct 30 02:29:07 2011] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 02:29:07 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Sun Oct 30 02:29:07 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.849
[Sun Oct 30 02:29:07 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.55"
[Sun Oct 30 02:29:08 2011] fullrun_ccd7_acisf08253_pi14-548_cl_pass0_src3.ximg exists
[Sun Oct 30 02:29:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf08253_pi14-548_cl_pass0_src3.csv
[Sun Oct 30 02:29:08 2011] fullrun_ccd7_acisf08253_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Oct 30 02:29:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf08253_pi14-548_cl_pass0_src3.csv
[Sun Oct 30 02:29:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf08253_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf08253_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 02:29:08 2011] fullrun_ccd7_acisf08253_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Oct 30 02:29:08 2011] fullrun_ccd7_acisf08253_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Oct 30 02:29:08 2011] Fit fullrun_ccd7_acisf08253_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Oct 30 02:29:14 2011] Spatial fit model total counts = 33.542400, observed total counts = 36.000000
[Sun Oct 30 02:29:14 2011] Offset between fit and detection position for source 2 = 0.674788 pixels
[Sun Oct 30 02:29:14 2011] 33.558100 total counts/ 0.000000 bgd. counts: snr = 202616940001613.562500
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.674788 pixels
  Position = (219.3, 710.3) = 13 49 19.43 4 3 48.6
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 33.6 +/- 5.8
  Background counts = 0.0
  Rate = 0.003 +/- 0.0005
[Sun Oct 30 02:29:14 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 02:29:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 02:29:14 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 02:29:14 2011] Source does appear to be extended
[Sun Oct 30 02:29:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 02:29:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 02:29:25 2011] Initial guess for spatial extent in simple fitting = 0.64"
[Sun Oct 30 02:29:25 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.931
[Sun Oct 30 02:29:25 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.64"
[Sun Oct 30 02:29:25 2011] fullrun_ccd7_acisf08253_pi14-548_cl_pass1_src3.ximg exists
[Sun Oct 30 02:29:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf08253_pi14-548_cl_pass1_src3.csv
[Sun Oct 30 02:29:25 2011] fullrun_ccd7_acisf08253_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Oct 30 02:29:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf08253_pi14-548_cl_pass1_src3.csv
[Sun Oct 30 02:29:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf08253_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf08253_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 02:29:25 2011] fullrun_ccd7_acisf08253_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Oct 30 02:29:25 2011] fullrun_ccd7_acisf08253_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Oct 30 02:29:25 2011] Fit fullrun_ccd7_acisf08253_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Oct 30 02:29:33 2011] Spatial fit model total counts = 34.930100, observed total counts = 36.000000
[Sun Oct 30 02:29:33 2011] Offset between fit and detection position for source 2 = 0.027436 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.027436 pixels
  Position = (219.3, 710.3) = 13 49 19.43 4 3 48.6
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 34.8 +/- 5.9
  Background counts = 0.0
  Rate = 0.003 +/- 0.0005
[Sun Oct 30 02:29:33 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 02:29:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 02:29:33 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 02:29:33 2011] Source does appear to be extended
[Sun Oct 30 02:29:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 02:30:20 2011] Not overwriting source region fullrun_ccd7_acisf08253_pi14-548_pass1_cl_src2_src.reg
[Sun Oct 30 02:30:20 2011] Extracting stamp from image fullrun_ccd7_acisf08253_pi14-548_cl_sm2.00.img.gz, (190, 681) - (248, 739)
[Sun Oct 30 02:30:20 2011] Writing fullrun_ccd7_acisf08253_pi14-548_pass1_cl_src2.gif
[Sun Oct 30 02:30:27 2011] ../../acisf08253/products/events/fullrun_ccd7_acisf08253_pi14-548_pass1_cl_src2_src.evt and ../../acisf08253/products/events/fullrun_ccd7_acisf08253_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sun Oct 30 02:30:27 2011] Size of ../../acisf08253/products/events/fullrun_ccd7_acisf08253_pi14-548_pass1_cl_src2_src.evt.gz[events] = 35 counts
[Sun Oct 30 02:30:27 2011] Mean chipx,y = (322.71, 826.51)
[Sun Oct 30 02:30:27 2011] Mean tdetx,y = (4239.71, 2528.51)
[Sun Oct 30 02:30:27 2011] chipx,y range = (305.00-339.00, 808.00-846.00)
[Sun Oct 30 02:30:27 2011] Size of ../../acisf08253/products/events/fullrun_ccd7_acisf08253_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 6 counts
[Sun Oct 30 02:30:27 2011] ../../acisf08253/products/images/fullrun_ccd7_acisf08253_pi14-548_pass1_cl_src2_src.img and ../../acisf08253/products/images/fullrun_ccd7_acisf08253_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sun Oct 30 02:30:27 2011] ../../acisf08253/products/spectra/fullrun_ccd7_acisf08253_pi14-548_pass1_cl_src2_src.pi and ../../acisf08253/products/spectra/fullrun_ccd7_acisf08253_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sun Oct 30 02:30:27 2011] Not generating rmf since there are only 34 counts
[Sun Oct 30 02:30:31 2011] ../../acisf08253/products/lightcurves/fullrun_ccd7_acisf08253_pi14-548_pass1_cl_src2_src.lc and ../../acisf08253/products/lightcurves/fullrun_ccd7_acisf08253_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sun Oct 30 02:31:20 2011] 229.299
[Sun Oct 30 02:31:23 2011] Updating aperture counts using extracted products
[Sun Oct 30 02:31:23 2011] Error reading totcts from fullrun_ccd7_acisf08253_pi14-548_pass1_cl_src2_src.pi.gz
[Sun Oct 30 02:31:23 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 02:31:23 2011] Using photon index=1.80, rate=0.00317, arf fullrun_ccd7_acisf08253_pi14-548_pass1_cl_src2.arf
[Sun Oct 30 02:31:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 02:31:23 2011] Updating source flux to 2.4e-14
[Sun Oct 30 02:31:28 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 30 02:31:29 2011] acisf08253/analysis//spectral/fullrun_ccd7_acisf08253_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete