[Thu Feb 23 23:01:43 2012] Detection parameters:
  Position = (192.2, 699.5) = 3 55 34.25 30 57 52.1
  Extent = 0.5" x 0.5", rotation angle = 49 degrees
  Source counts = 81.0 +/- 9.3
  Background counts = 5.0
  Rate = 0.002 +/- 0.0002

[Thu Feb 23 23:01:52 2012] Off-axis axis estimate = 5.90'
[Fri Feb 24 00:06:23 2012] Using EEF radius (= 1.58 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 00:06:23 2012] Initial guess for spatial extent in simple fitting = 1.58"
[Fri Feb 24 00:06:23 2012] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.014
[Fri Feb 24 00:06:23 2012] Giving source the simple spatial ID 93 for pass 0, mean size = 1.58"
[Fri Feb 24 06:37:06 2012] fullrun_ccd3_acisf08229_pi14-548_cl_pass0_src93.ximg exists
[Fri Feb 24 06:37:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08229_pi14-548_cl_pass0_src93.csv
[Fri Feb 24 06:37:06 2012] fullrun_ccd3_acisf08229_pi14-548_cl_pass0_src93_1.ximg exists
[Fri Feb 24 06:37:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08229_pi14-548_cl_pass0_src93.csv
[Fri Feb 24 06:37:06 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08229_pi14-548_cl_pass0_src93_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08229_pi14-548_cl_pass0_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 06:37:07 2012] fullrun_ccd3_acisf08229_pi14-548_cl_pass0_tfrozen_src93.ximg exists
[Fri Feb 24 06:37:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08229_pi14-548_cl_pass0_tfrozen_src93.csv
[Fri Feb 24 06:37:07 2012] fullrun_ccd3_acisf08229_pi14-548_cl_pass0_tfrozen_src93_1.ximg exists
[Fri Feb 24 06:37:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08229_pi14-548_cl_pass0_tfrozen_src93.csv
[Fri Feb 24 06:37:07 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08229_pi14-548_cl_pass0_tfrozen_src93_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08229_pi14-548_cl_pass0_tfrozen_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 06:58:56 2012] Warning, spatial fit 93 centroid is now closest to src. 24
[Fri Feb 24 06:58:56 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 06:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 06:58:56 2012] Assessing source extent using major
[Fri Feb 24 06:58:56 2012] Source does appear to be extended
[Fri Feb 24 06:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 06:58:56 2012] Source is confused with source 22
[Fri Feb 24 07:53:20 2012] Using EEF radius (= 1.58 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 07:53:20 2012] Initial guess for spatial extent in simple fitting = 1.58"
[Fri Feb 24 07:53:20 2012] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.014
[Fri Feb 24 07:53:20 2012] Giving source the simple spatial ID 90 for pass 1, mean size = 1.58"
[Fri Feb 24 14:19:11 2012] fullrun_ccd3_acisf08229_pi14-548_cl_pass1_src90.ximg exists
[Fri Feb 24 14:19:11 2012] fullrun_ccd3_acisf08229_pi14-548_cl_pass1_src90_1.ximg exists
[Fri Feb 24 14:19:11 2012] Fit fullrun_ccd3_acisf08229_pi14-548_cl_pass1_src90 appears to have run properly
[Fri Feb 24 14:19:13 2012] fullrun_ccd3_acisf08229_pi14-548_cl_pass1_tfrozen_src90.ximg exists
[Fri Feb 24 14:19:13 2012] fullrun_ccd3_acisf08229_pi14-548_cl_pass1_tfrozen_src90_1.ximg exists
[Fri Feb 24 14:19:13 2012] Fit fullrun_ccd3_acisf08229_pi14-548_cl_pass1_tfrozen_src90 appears to have run properly
[Fri Feb 24 14:50:47 2012] Source 23 is offset by 1.973163 and -0.773720 pixels which is larger than
2 X fitted extent = 1.670000 x 1.670000, not incorporating fit results
[Fri Feb 24 14:50:47 2012] Spatial fit model total counts = 428.471000, observed total counts = 433.000000
[Fri Feb 24 14:50:47 2012] Offset between fit and detection position for source 23 = 0.186154 pixels
[Fri Feb 24 14:50:47 2012] 425.460800 total counts/ 43.034800 bgd. counts: snr = 58.295834
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.186154 pixels
  Position = (192.3, 699.7) = 3 55 34.27 30 57 52.0
  Extent = 3.2 (3.1-6.3)" x 0.4 (0.4-0.5)", rotation angle = 297 (296-297) degrees
  Source counts = 382.4 +/- 20.6
  Background counts = 43.0
  Rate = 0.008 +/- 0.0004
[Fri Feb 24 14:50:47 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 14:50:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 14:50:47 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 14:50:47 2012] Source does appear to be extended
[Fri Feb 24 14:50:47 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 6.79
[Fri Feb 24 14:50:47 2012] Source is asymmetric
[Fri Feb 24 15:18:12 2012] Writing source region out to fullrun_ccd3_acisf08229_pi14-548_pass1_cl_src23_src.reg
[Fri Feb 24 15:18:12 2012] Extracting stamp from image fullrun_ccd3_acisf08229_pi14-548_cl_sm2.00.img.gz, (48, 555) - (337, 844)
[Fri Feb 24 15:18:12 2012] Writing fullrun_ccd3_acisf08229_pi14-548_pass1_cl_src23.gif
[Fri Feb 24 16:08:20 2012] Size of ../../acisf08229/products/events/fullrun_ccd3_acisf08229_pi14-548_pass1_cl_src23_src.evt.gz[events] = 177 counts
[Fri Feb 24 16:08:20 2012] Mean chipx,y = (970.05, 302.68)
[Fri Feb 24 16:08:20 2012] Mean tdetx,y = (4829.32, 4031.05)
[Fri Feb 24 16:08:20 2012] chipx,y range = (941.00-989.00, 281.00-324.00)
[Fri Feb 24 16:08:20 2012] Size of ../../acisf08229/products/events/fullrun_ccd3_acisf08229_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 843 counts
[Fri Feb 24 16:08:21 2012] rmf not found, will run specextract
[Fri Feb 24 16:08:21 2012] arf not found, will run specextract
[Fri Feb 24 16:08:42 2012] ../../acisf08229/products/spectra/fullrun_ccd3_acisf08229_pi14-548_pass1_cl_src23.warf not found
[Fri Feb 24 16:08:42 2012] ../../acisf08229/products/spectra/fullrun_ccd3_acisf08229_pi14-548_pass1_cl_src23.wrmf not found
[Fri Feb 24 16:08:42 2012] Removal of ../../acisf08229/products/spectra/fullrun_ccd3_acisf08229_pi14-548_pass1_cl_src23.soff failed
[Fri Feb 24 16:22:22 2012] Keeping rmf generated by specextract
[Fri Feb 24 16:22:22 2012] 186.206
[Fri Feb 24 16:23:55 2012] Updating aperture counts using extracted products
[Fri Feb 24 16:23:55 2012] Error reading totcts from fullrun_ccd3_acisf08229_pi14-548_pass1_cl_src23_src.pi.gz
[Fri Feb 24 16:23:56 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 16:23:56 2012] Using photon index=1.80, rate=0.0078, arf fullrun_ccd3_acisf08229_pi14-548_pass1_cl_src23.arf
[Fri Feb 24 16:23:56 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 24 16:23:56 2012] Updating source flux to 9.5e-14
[Fri Feb 24 16:24:16 2012] Flag b found in src. 23 procflags, skipping spectral fitting
[Fri Feb 24 16:24:16 2012] Flag c found in src. 23 procflags, skipping spectral fitting