[Thu Feb 23 23:01:41 2012] Detection parameters:
  Position = (491.3, 1292.3) = 3 55 22.81 31 2 43.8
  Extent = 0.8" x 0.6", rotation angle = 55 degrees
  Source counts = 8485.4 +/- 107.1
  Background counts = 2979.6
  Rate = 0.2 +/- 0.002

[Thu Feb 23 23:01:52 2012] Off-axis axis estimate = 0.47'
[Fri Feb 24 00:06:23 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 00:06:23 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Fri Feb 24 00:06:23 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.329
[Fri Feb 24 00:06:23 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.39"
[Fri Feb 24 06:37:05 2012] fullrun_ccd3_acisf08229_pi14-548_cl_pass0_src1.ximg exists
[Fri Feb 24 06:37:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08229_pi14-548_cl_pass0_src1.csv
[Fri Feb 24 06:37:05 2012] fullrun_ccd3_acisf08229_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Feb 24 06:37:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08229_pi14-548_cl_pass0_src1.csv
[Fri Feb 24 06:37:05 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08229_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08229_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 06:37:06 2012] fullrun_ccd3_acisf08229_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 24 06:37:06 2012] fullrun_ccd3_acisf08229_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 24 06:37:06 2012] Fit fullrun_ccd3_acisf08229_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 24 06:58:56 2012] Spatial fit model total counts = 14769.500000, observed total counts = 14761.000000
[Fri Feb 24 06:58:56 2012] Offset between fit and detection position for source 2 = 2.566258 pixels
[Fri Feb 24 06:58:56 2012] 14640.510000 total counts/ 8592.520000 bgd. counts: snr = 65.245534
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.566258 pixels
  Position = (488.9, 1291.4) = 3 55 22.92 31 2 43.1
  Extent = 1.4 (1.3-1.5)", rotation angle = 0
  Source counts = 6048.0 +/- 121.0
  Background counts = 8592.5
  Rate = 0.1 +/- 0.002
[Fri Feb 24 06:58:56 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 06:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 06:58:56 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 06:58:56 2012] Source does appear to be extended
[Fri Feb 24 06:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 06:58:56 2012] Source is confused with source 1
[Fri Feb 24 06:58:56 2012] Source is confused with source 3
[Fri Feb 24 07:53:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 24 07:53:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 24 07:53:20 2012] Initial guess for spatial extent in simple fitting = 1.40"
[Fri Feb 24 07:53:20 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.936
[Fri Feb 24 07:53:20 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 1.40"
[Fri Feb 24 14:19:10 2012] fullrun_ccd3_acisf08229_pi14-548_cl_pass1_src1.ximg exists
[Fri Feb 24 14:19:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08229_pi14-548_cl_pass1_src1.csv
[Fri Feb 24 14:19:10 2012] fullrun_ccd3_acisf08229_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Feb 24 14:19:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08229_pi14-548_cl_pass1_src1.csv
[Fri Feb 24 14:19:10 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08229_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08229_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 14:19:11 2012] fullrun_ccd3_acisf08229_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 24 14:19:11 2012] fullrun_ccd3_acisf08229_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 24 14:19:11 2012] Fit fullrun_ccd3_acisf08229_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 24 14:50:47 2012] Warning, spatial fit 1 centroid is now closest to src. 1
[Fri Feb 24 14:50:47 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 14:50:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 14:50:47 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 14:50:47 2012] Source does appear to be extended
[Fri Feb 24 14:50:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 15:18:07 2012] Writing source region out to fullrun_ccd3_acisf08229_pi14-548_pass1_cl_src2_src.reg
[Fri Feb 24 15:18:07 2012] Extracting stamp from image fullrun_ccd3_acisf08229_pi14-548_cl_sm2.00.img.gz, (425, 1227) - (553, 1356)
[Fri Feb 24 15:18:07 2012] Writing fullrun_ccd3_acisf08229_pi14-548_pass1_cl_src2.gif
[Fri Feb 24 15:18:17 2012] Size of ../../acisf08229/products/events/fullrun_ccd3_acisf08229_pi14-548_pass1_cl_src2_src.evt.gz[events] = 23081 counts
[Fri Feb 24 15:18:17 2012] Mean chipx,y = (968.55, 966.30)
[Fri Feb 24 15:18:17 2012] Mean tdetx,y = (4165.70, 4029.55)
[Fri Feb 24 15:18:17 2012] chipx,y range = (939.00-997.00, 938.00-996.00)
[Fri Feb 24 15:18:17 2012] Size of ../../acisf08229/products/events/fullrun_ccd3_acisf08229_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 15852 counts
[Fri Feb 24 15:18:18 2012] rmf not found, will run specextract
[Fri Feb 24 15:18:18 2012] arf not found, will run specextract
[Fri Feb 24 15:18:53 2012] ../../acisf08229/products/spectra/fullrun_ccd3_acisf08229_pi14-548_pass1_cl_src2.warf not found
[Fri Feb 24 15:18:53 2012] ../../acisf08229/products/spectra/fullrun_ccd3_acisf08229_pi14-548_pass1_cl_src2.wrmf not found
[Fri Feb 24 15:18:53 2012] Removal of ../../acisf08229/products/spectra/fullrun_ccd3_acisf08229_pi14-548_pass1_cl_src2.soff failed
[Fri Feb 24 16:22:21 2012] Keeping rmf generated by specextract
[Fri Feb 24 16:22:21 2012] 203.227
[Fri Feb 24 16:23:54 2012] Updating aperture counts using extracted products
[Fri Feb 24 16:23:54 2012] Error reading totcts from fullrun_ccd3_acisf08229_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Feb 24 16:23:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 16:23:55 2012] Using photon index=1.80, rate=0.123, arf fullrun_ccd3_acisf08229_pi14-548_pass1_cl_src2.arf
[Fri Feb 24 16:23:55 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 24 16:23:55 2012] Updating source flux to 1.4e-12
[Fri Feb 24 16:24:16 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Fri Feb 24 16:28:13 2012] Reading fit data from acisf08229/analysis//spectral/fullrun_ccd3_acisf08229_pi14-548_pass1_cl_src2_pl.csv
[Fri Feb 24 16:28:13 2012] Spectral fit parameter nH value = 4.18934e+21
[Fri Feb 24 16:28:13 2012] Spectral fit parameter PhoIndex value = 0.902159
[Fri Feb 24 16:28:13 2012] Failed to get F(0.3-8.0) from acisf08229/analysis//spectral/fullrun_ccd3_acisf08229_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Feb 24 16:28:13 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 16:28:13 2012] Using Nh = 4.2e+21, photon index=0.90, rate=0.123, arf fullrun_ccd3_acisf08229_pi14-548_pass1_cl_src2.arf
[Fri Feb 24 16:28:13 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 24 16:28:13 2012] Updating source flux to 2.2e-12