[Thu Feb 23 23:01:34 2012] Detection parameters:
  Position = (789.9, 190.4) = 3 55 29.22 31 5 5.1
  Extent = 0.7" x 0.5", rotation angle = 134 degrees
  Source counts = 16.6 +/- 4.6
  Background counts = 4.4
  Rate = 0.0003 +/- 9e-05

[Thu Feb 23 23:01:35 2012] Off-axis axis estimate = 2.58'
[Thu Feb 23 23:06:00 2012] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 23:06:00 2012] Initial guess for spatial extent in simple fitting = 0.50"
[Thu Feb 23 23:06:00 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.968
[Thu Feb 23 23:06:00 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 0.50"
[Thu Feb 23 23:35:51 2012] fullrun_ccd0_acisf08229_pi14-548_cl_pass0_src18.ximg exists
[Thu Feb 23 23:35:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf08229_pi14-548_cl_pass0_src18.csv
[Thu Feb 23 23:35:51 2012] fullrun_ccd0_acisf08229_pi14-548_cl_pass0_src18_1.ximg exists
[Thu Feb 23 23:35:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf08229_pi14-548_cl_pass0_src18.csv
[Thu Feb 23 23:35:51 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf08229_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf08229_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 23:35:51 2012] fullrun_ccd0_acisf08229_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Thu Feb 23 23:35:51 2012] fullrun_ccd0_acisf08229_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Thu Feb 23 23:35:51 2012] Fit fullrun_ccd0_acisf08229_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Fri Feb 24 06:58:39 2012] Source 18 is offset by 4.980575 and 3.504501 pixels which is larger than
2 X fitted extent = 0.512463 x 0.512463, not incorporating fit results
[Fri Feb 24 06:58:39 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 06:58:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 06:58:39 2012] Assessing source extent using major
[Fri Feb 24 06:58:39 2012] Source does appear to be extended
[Fri Feb 24 06:58:39 2012] Computing asymmetry using major and minor axis, asym = 1.42
[Fri Feb 24 06:59:25 2012] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 06:59:25 2012] Initial guess for spatial extent in simple fitting = 0.50"
[Fri Feb 24 06:59:25 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.968
[Fri Feb 24 06:59:25 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 0.50"
[Fri Feb 24 07:25:38 2012] fullrun_ccd0_acisf08229_pi14-548_cl_pass1_src18.ximg exists
[Fri Feb 24 07:25:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf08229_pi14-548_cl_pass1_src18.csv
[Fri Feb 24 07:25:39 2012] fullrun_ccd0_acisf08229_pi14-548_cl_pass1_src18_1.ximg exists
[Fri Feb 24 07:25:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf08229_pi14-548_cl_pass1_src18.csv
[Fri Feb 24 07:25:39 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf08229_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf08229_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 07:25:39 2012] fullrun_ccd0_acisf08229_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Fri Feb 24 07:25:39 2012] fullrun_ccd0_acisf08229_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Fri Feb 24 07:25:39 2012] Fit fullrun_ccd0_acisf08229_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Fri Feb 24 14:50:29 2012] Source 18 is offset by 4.613359 and -4.694930 pixels which is larger than
2 X fitted extent = 0.512463 x 0.512463, not incorporating fit results
[Fri Feb 24 14:50:29 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 14:50:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 14:50:29 2012] Assessing source extent using major
[Fri Feb 24 14:50:29 2012] Source does appear to be extended
[Fri Feb 24 14:50:29 2012] Computing asymmetry using major and minor axis, asym = 1.42
[Fri Feb 24 14:51:18 2012] Writing source region out to fullrun_ccd0_acisf08229_pi14-548_pass1_cl_src18_src.reg
[Fri Feb 24 14:51:18 2012] Extracting stamp from image fullrun_ccd0_acisf08229_pi14-548_cl_sm2.00.img.gz, (756, 157) - (824, 224)
[Fri Feb 24 14:51:18 2012] Writing fullrun_ccd0_acisf08229_pi14-548_pass1_cl_src18.gif
[Fri Feb 24 15:00:20 2012] Size of ../../acisf08229/products/events/fullrun_ccd0_acisf08229_pi14-548_pass1_cl_src18_src.evt.gz[events] = 20 counts
[Fri Feb 24 15:00:20 2012] Mean chipx,y = (828.85, 921.30)
[Fri Feb 24 15:00:20 2012] Mean tdetx,y = (3982.30, 4303.15)
[Fri Feb 24 15:00:20 2012] chipx,y range = (813.00-846.00, 902.00-936.00)
[Fri Feb 24 15:00:20 2012] Size of ../../acisf08229/products/events/fullrun_ccd0_acisf08229_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 87 counts
[Fri Feb 24 15:00:21 2012] Not generating rmf since there are only 16 counts
[Fri Feb 24 15:00:21 2012] arf not found, will run specextract
[Fri Feb 24 15:00:54 2012] ../../acisf08229/products/spectra/fullrun_ccd0_acisf08229_pi14-548_pass1_cl_src18.warf not found
[Fri Feb 24 15:00:54 2012] ../../acisf08229/products/spectra/fullrun_ccd0_acisf08229_pi14-548_pass1_cl_src18.wrmf not found
[Fri Feb 24 15:00:54 2012] Removal of ../../acisf08229/products/spectra/fullrun_ccd0_acisf08229_pi14-548_pass1_cl_src18.soff failed
[Fri Feb 24 15:02:11 2012] Spectrum 18 has only 17 counts, deleting rmf
[Fri Feb 24 15:02:11 2012] 199.936
[Fri Feb 24 16:23:53 2012] Updating aperture counts using extracted products
[Fri Feb 24 16:23:53 2012] Error reading totcts from fullrun_ccd0_acisf08229_pi14-548_pass1_cl_src18_src.pi.gz
[Fri Feb 24 16:23:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 16:23:53 2012] Using photon index=1.80, rate=0.000339, arf fullrun_ccd0_acisf08229_pi14-548_pass1_cl_src18.arf
[Fri Feb 24 16:23:53 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 24 16:23:53 2012] Updating source flux to 3.8e-15
[Fri Feb 24 16:24:03 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting