[Wed Sep 21 21:42:09 2011] Detection parameters: Position = (987.7, 892.4) = 12 49 38.63 -6 4 45.6 Extent = 2.4" x 1.9", rotation angle = 20 degrees Source counts = 2363.2 +/- 49.8 Background counts = 114.8 Rate = 0.4 +/- 0.009 [Wed Sep 21 21:42:10 2011] Off-axis axis estimate = 8.34' [Wed Sep 21 21:42:55 2011] Using EEF radius (= 3.07 ")to estimate initial spatial extent for simple fitting [Wed Sep 21 21:42:55 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Sep 21 21:42:55 2011] Initial guess for spatial extent in simple fitting = 3.07" [Wed Sep 21 21:42:55 2011] source mask rpix=6.2, npix_max = 181, mask sum = 169, frac = 0.929 [Wed Sep 21 21:42:55 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.07" [Wed Sep 21 21:42:55 2011] fullrun_ccd3_acisf00821_pi14-548_cl_pass0_src1.ximg exists [Wed Sep 21 21:42:55 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf00821_pi14-548_cl_pass0_src1.csv [Wed Sep 21 21:42:55 2011] fullrun_ccd3_acisf00821_pi14-548_cl_pass0_src1_1.ximg exists [Wed Sep 21 21:42:55 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf00821_pi14-548_cl_pass0_src1.csv [Wed Sep 21 21:42:55 2011] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf00821_pi14-548_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf00821_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Sep 21 21:42:55 2011] fullrun_ccd3_acisf00821_pi14-548_cl_pass0_tfrozen_src1.ximg exists [Wed Sep 21 21:42:55 2011] fullrun_ccd3_acisf00821_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists [Wed Sep 21 21:42:55 2011] Fit fullrun_ccd3_acisf00821_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly [Wed Sep 21 21:43:05 2011] Spatial fit model total counts = 2485.990000, observed total counts = 2486.000000 [Wed Sep 21 21:43:05 2011] Offset between fit and detection position for source 4 = 0.736487 pixels [Wed Sep 21 21:43:05 2011] 2486.154000 total counts/ 101.644000 bgd. counts: snr = 236.514774 Spatial fit parameters: Offset between fit and detection position for source 4 = 0.736487 pixels Position = (988.1, 893.0) = 12 49 38.63 -6 4 45.6 Extent = 2.7 (2.6-2.8)", rotation angle = 0 Source counts = 2384.5 +/- 49.9 Background counts = 101.6 Rate = 0.4 +/- 0.009 [Wed Sep 21 21:43:05 2011] Vigneting correction estimate = 1.000000 [Wed Sep 21 21:43:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Sep 21 21:43:05 2011] Assessing source extent using major axis lower bound [Wed Sep 21 21:43:05 2011] Source does appear to be extended [Wed Sep 21 21:43:05 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Sep 21 21:43:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Sep 21 21:43:20 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Sep 21 21:43:20 2011] Initial guess for spatial extent in simple fitting = 2.70" [Wed Sep 21 21:43:20 2011] source mask rpix=5.5, npix_max = 143, mask sum = 144, frac = 1.003 [Wed Sep 21 21:43:20 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.70" [Wed Sep 21 21:43:21 2011] fullrun_ccd3_acisf00821_pi14-548_cl_pass1_src1.ximg exists [Wed Sep 21 21:43:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00821_pi14-548_cl_pass1_src1.csv [Wed Sep 21 21:43:21 2011] fullrun_ccd3_acisf00821_pi14-548_cl_pass1_src1_1.ximg exists [Wed Sep 21 21:43:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00821_pi14-548_cl_pass1_src1.csv [Wed Sep 21 21:43:21 2011] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf00821_pi14-548_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf00821_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Sep 21 21:43:21 2011] fullrun_ccd3_acisf00821_pi14-548_cl_pass1_tfrozen_src1.ximg exists [Wed Sep 21 21:43:21 2011] fullrun_ccd3_acisf00821_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists [Wed Sep 21 21:43:21 2011] Fit fullrun_ccd3_acisf00821_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly [Wed Sep 21 21:43:28 2011] Spatial fit model total counts = 2487.960000, observed total counts = 2480.000000 [Wed Sep 21 21:43:28 2011] Offset between fit and detection position for source 4 = 0.063383 pixels [Wed Sep 21 21:43:28 2011] 2487.039000 total counts/ 155.389000 bgd. counts: snr = 187.048067 Spatial fit parameters: Offset between fit and detection position for source 4 = 0.063383 pixels Position = (988.1, 893.1) = 12 49 38.63 -6 4 45.6 Extent = 2.6 (2.5-2.7)", rotation angle = 0 Source counts = 2331.7 +/- 49.9 Background counts = 155.4 Rate = 0.4 +/- 0.009 [Wed Sep 21 21:43:28 2011] Vigneting correction estimate = 1.000000 [Wed Sep 21 21:43:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Sep 21 21:43:28 2011] Assessing source extent using major axis lower bound [Wed Sep 21 21:43:28 2011] Source does appear to be extended [Wed Sep 21 21:43:28 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Sep 21 21:43:44 2011] Not overwriting source region fullrun_ccd3_acisf00821_pi14-548_pass1_cl_src4_src.reg [Wed Sep 21 21:43:44 2011] Extracting stamp from image fullrun_ccd3_acisf00821_pi14-548_cl_sm2.00.img.gz, (869, 774) - (1107, 1012) [Wed Sep 21 21:43:44 2011] Writing fullrun_ccd3_acisf00821_pi14-548_pass1_cl_src4.gif [Wed Sep 21 21:43:44 2011] ../../acisf00821/products/events/fullrun_ccd3_acisf00821_pi14-548_pass1_cl_src4_src.evt and ../../acisf00821/products/events/fullrun_ccd3_acisf00821_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create [Wed Sep 21 21:43:44 2011] Size of ../../acisf00821/products/events/fullrun_ccd3_acisf00821_pi14-548_pass1_cl_src4_src.evt.gz[events] = 2463 counts [Wed Sep 21 21:43:44 2011] Mean chipx,y = (103.60, 607.25) [Wed Sep 21 21:43:44 2011] Mean tdetx,y = (4524.75, 3164.60) [Wed Sep 21 21:43:44 2011] chipx,y range = (72.00-138.00, 574.00-640.00) [Wed Sep 21 21:43:44 2011] Size of ../../acisf00821/products/events/fullrun_ccd3_acisf00821_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 38 counts [Wed Sep 21 21:43:44 2011] ../../acisf00821/products/images/fullrun_ccd3_acisf00821_pi14-548_pass1_cl_src4_src.img and ../../acisf00821/products/images/fullrun_ccd3_acisf00821_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create [Wed Sep 21 21:43:44 2011] ../../acisf00821/products/spectra/fullrun_ccd3_acisf00821_pi14-548_pass1_cl_src4_src.pi and ../../acisf00821/products/spectra/fullrun_ccd3_acisf00821_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create [Wed Sep 21 21:43:47 2011] ../../acisf00821/products/lightcurves/fullrun_ccd3_acisf00821_pi14-548_pass1_cl_src4_src.lc and ../../acisf00821/products/lightcurves/fullrun_ccd3_acisf00821_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create [Wed Sep 21 21:43:51 2011] Keeping rmf generated by specextract [Wed Sep 21 21:43:51 2011] 177.113 [Wed Sep 21 21:45:07 2011] Updating aperture counts using extracted products [Wed Sep 21 21:45:07 2011] Error reading totcts from fullrun_ccd3_acisf00821_pi14-548_pass1_cl_src4_src.pi.gz [Wed Sep 21 21:45:07 2011] Calculating source flux in energy range 0.30-8.00 [Wed Sep 21 21:45:07 2011] Using photon index=1.80, rate=0.426, arf fullrun_ccd3_acisf00821_pi14-548_pass1_cl_src4.arf [Wed Sep 21 21:45:07 2011] Assuming count rate is from the 0.20-8.00 bandpass [Wed Sep 21 21:45:07 2011] Updating source flux to 4.9e-12 [Wed Sep 21 21:45:17 2011] Reading fit data from acisf00821/analysis//spectral/fullrun_ccd3_acisf00821_pi14-548_pass1_cl_src4_pl.csv [Wed Sep 21 21:45:17 2011] Spectral fit parameter nH value = 1.19429e+21 [Wed Sep 21 21:45:17 2011] Spectral fit parameter PhoIndex value = 2.8655 [Wed Sep 21 21:45:17 2011] Failed to get F(0.3-8.0) from acisf00821/analysis//spectral/fullrun_ccd3_acisf00821_pi14-548_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected [Wed Sep 21 21:45:17 2011] Calculating source flux in energy range 0.30-8.00 [Wed Sep 21 21:45:17 2011] Using Nh = 1.2e+21, photon index=2.87, rate=0.426, arf fullrun_ccd3_acisf00821_pi14-548_pass1_cl_src4.arf [Wed Sep 21 21:45:17 2011] Assuming count rate is from the 0.20-8.00 bandpass [Wed Sep 21 21:45:17 2011] Updating source flux to 3.7e-12