[Sun Oct 16 09:25:34 2011] Detection parameters:
  Position = (634.8, 368.8) = 17 44 11.56 -28 49 22.1
  Extent = 1.9" x 1.4", rotation angle = 111 degrees
  Source counts = 55.6 +/- 7.7
  Background counts = 4.4
  Rate = 0.004 +/- 0.0005

[Sun Oct 16 09:25:36 2011] Off-axis axis estimate = 6.41'
[Sun Oct 16 09:26:09 2011] Using EEF radius (= 1.84 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 09:26:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 16 09:26:09 2011] Initial guess for spatial extent in simple fitting = 1.84"
[Sun Oct 16 09:26:09 2011] source mask rpix=3.7, npix_max = 72, mask sum = 64, frac = 0.888
[Sun Oct 16 09:26:09 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.84"
[Sun Oct 16 09:26:09 2011] fullrun_ccd2_acisf08209_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 16 09:26:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08209_pi14-548_cl_pass0_src1.csv
[Sun Oct 16 09:26:09 2011] fullrun_ccd2_acisf08209_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 16 09:26:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08209_pi14-548_cl_pass0_src1.csv
[Sun Oct 16 09:26:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08209_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08209_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 09:26:09 2011] fullrun_ccd2_acisf08209_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 16 09:26:09 2011] fullrun_ccd2_acisf08209_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 16 09:26:09 2011] Fit fullrun_ccd2_acisf08209_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 16 09:26:14 2011] Spatial fit model total counts = 62.876000, observed total counts = 63.000000
[Sun Oct 16 09:26:14 2011] Offset between fit and detection position for source 3 = 0.440228 pixels
[Sun Oct 16 09:26:14 2011] 63.478900 total counts/ 14.485600 bgd. counts: snr = 12.872664
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.440228 pixels
  Position = (635.2, 369.0) = 17 44 11.56 -28 49 22.3
  Extent = 1.8 (1.4-2.3)", rotation angle = 0
  Source counts = 49.0 +/- 8.0
  Background counts = 14.5
  Rate = 0.003 +/- 0.0005
[Sun Oct 16 09:26:14 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 09:26:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 09:26:14 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 09:26:14 2011] Source does appear to be extended
[Sun Oct 16 09:26:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 09:26:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 16 09:26:26 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 16 09:26:26 2011] Initial guess for spatial extent in simple fitting = 1.76"
[Sun Oct 16 09:26:26 2011] source mask rpix=3.6, npix_max = 66, mask sum = 64, frac = 0.962
[Sun Oct 16 09:26:26 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.76"
[Sun Oct 16 09:26:26 2011] fullrun_ccd2_acisf08209_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 16 09:26:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08209_pi14-548_cl_pass1_src1.csv
[Sun Oct 16 09:26:26 2011] fullrun_ccd2_acisf08209_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 16 09:26:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08209_pi14-548_cl_pass1_src1.csv
[Sun Oct 16 09:26:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08209_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08209_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 09:26:26 2011] fullrun_ccd2_acisf08209_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 16 09:26:26 2011] fullrun_ccd2_acisf08209_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 16 09:26:26 2011] Fit fullrun_ccd2_acisf08209_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 16 09:26:32 2011] Spatial fit model total counts = 61.738400, observed total counts = 62.000000
[Sun Oct 16 09:26:32 2011] Offset between fit and detection position for source 3 = 0.128239 pixels
[Sun Oct 16 09:26:32 2011] 62.316100 total counts/ 12.107600 bgd. counts: snr = 14.429398
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.128239 pixels
  Position = (635.1, 369.1) = 17 44 11.56 -28 49 22.2
  Extent = 1.8 (1.4-2.3)", rotation angle = 0
  Source counts = 50.2 +/- 7.9
  Background counts = 12.1
  Rate = 0.003 +/- 0.0005
[Sun Oct 16 09:26:32 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 09:26:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 09:26:32 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 09:26:32 2011] Source does appear to be extended
[Sun Oct 16 09:26:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 09:27:35 2011] Not overwriting source region fullrun_ccd2_acisf08209_pi14-548_pass1_cl_src3_src.reg
[Sun Oct 16 09:27:35 2011] Extracting stamp from image fullrun_ccd2_acisf08209_pi14-548_cl_sm2.00.img.gz, (552, 286) - (718, 452)
[Sun Oct 16 09:27:35 2011] Writing fullrun_ccd2_acisf08209_pi14-548_pass1_cl_src3.gif
[Sun Oct 16 09:27:36 2011] ../../acisf08209/products/events/fullrun_ccd2_acisf08209_pi14-548_pass1_cl_src3_src.evt and ../../acisf08209/products/events/fullrun_ccd2_acisf08209_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sun Oct 16 09:27:36 2011] Size of ../../acisf08209/products/events/fullrun_ccd2_acisf08209_pi14-548_pass1_cl_src3_src.evt.gz[events] = 61 counts
[Sun Oct 16 09:27:36 2011] Mean chipx,y = (405.34, 343.10)
[Sun Oct 16 09:27:36 2011] Mean tdetx,y = (3404.10, 3680.66)
[Sun Oct 16 09:27:36 2011] chipx,y range = (384.00-435.00, 314.00-368.00)
[Sun Oct 16 09:27:36 2011] Size of ../../acisf08209/products/events/fullrun_ccd2_acisf08209_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 48 counts
[Sun Oct 16 09:27:36 2011] ../../acisf08209/products/images/fullrun_ccd2_acisf08209_pi14-548_pass1_cl_src3_src.img and ../../acisf08209/products/images/fullrun_ccd2_acisf08209_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sun Oct 16 09:27:36 2011] ../../acisf08209/products/spectra/fullrun_ccd2_acisf08209_pi14-548_pass1_cl_src3_src.pi and ../../acisf08209/products/spectra/fullrun_ccd2_acisf08209_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sun Oct 16 09:27:36 2011] Not generating rmf since there are only 50 counts
[Sun Oct 16 09:27:39 2011] ../../acisf08209/products/lightcurves/fullrun_ccd2_acisf08209_pi14-548_pass1_cl_src3_src.lc and ../../acisf08209/products/lightcurves/fullrun_ccd2_acisf08209_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sun Oct 16 09:28:30 2011] 175.562
[Sun Oct 16 09:29:01 2011] Updating aperture counts using extracted products
[Sun Oct 16 09:29:01 2011] Error reading totcts from fullrun_ccd2_acisf08209_pi14-548_pass1_cl_src3_src.pi.gz
[Sun Oct 16 09:29:01 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 09:29:01 2011] Using photon index=1.80, rate=0.00346, arf fullrun_ccd2_acisf08209_pi14-548_pass1_cl_src3.arf
[Sun Oct 16 09:29:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 09:29:01 2011] Updating source flux to 5.8e-14
[Sun Oct 16 09:29:09 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 16 09:29:10 2011] acisf08209/analysis//spectral/fullrun_ccd2_acisf08209_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete