[Fri Oct 28 17:22:43 2011] Detection parameters:
  Position = (718.4, 351.7) = 17 41 47.71 -28 22 10.2
  Extent = 0.6" x 0.5", rotation angle = 38 degrees
  Source counts = 31.4 +/- 5.7
  Background counts = 0.6
  Rate = 0.002 +/- 0.0004

[Fri Oct 28 17:22:45 2011] Off-axis axis estimate = 3.40'
[Fri Oct 28 17:23:21 2011] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 17:23:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 17:23:21 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Fri Oct 28 17:23:21 2011] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.867
[Fri Oct 28 17:23:21 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.67"
[Fri Oct 28 17:23:21 2011] fullrun_ccd3_acisf08204_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 28 17:23:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08204_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 17:23:21 2011] fullrun_ccd3_acisf08204_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 28 17:23:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08204_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 17:23:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08204_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08204_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 17:23:21 2011] fullrun_ccd3_acisf08204_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 28 17:23:21 2011] fullrun_ccd3_acisf08204_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 28 17:23:21 2011] Fit fullrun_ccd3_acisf08204_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 28 17:23:27 2011] Spatial fit model total counts = 31.841700, observed total counts = 32.000000
[Fri Oct 28 17:23:27 2011] Offset between fit and detection position for source 4 = 0.683613 pixels
[Fri Oct 28 17:23:27 2011] 32.036330 total counts/ 3.458130 bgd. counts: snr = 15.367889
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.683613 pixels
  Position = (719.0, 352.1) = 17 41 47.71 -28 22 10.2
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 28.6 +/- 5.7
  Background counts = 3.5
  Rate = 0.002 +/- 0.0004
[Fri Oct 28 17:23:27 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 17:23:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 17:23:27 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 17:23:27 2011] Source does appear to be extended
[Fri Oct 28 17:23:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 17:23:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 17:23:42 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 17:23:42 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Fri Oct 28 17:23:42 2011] source mask rpix=1.1, npix_max = 10, mask sum = 16, frac = 1.524
[Fri Oct 28 17:23:42 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.55"
[Fri Oct 28 17:23:43 2011] fullrun_ccd3_acisf08204_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 28 17:23:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08204_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 17:23:43 2011] fullrun_ccd3_acisf08204_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 28 17:23:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08204_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 17:23:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08204_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08204_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 17:23:43 2011] fullrun_ccd3_acisf08204_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 28 17:23:43 2011] fullrun_ccd3_acisf08204_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 28 17:23:43 2011] Fit fullrun_ccd3_acisf08204_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 28 17:23:48 2011] Spatial fit model total counts = 31.996700, observed total counts = 32.000000
[Fri Oct 28 17:23:48 2011] Offset between fit and detection position for source 4 = 0.005281 pixels
[Fri Oct 28 17:23:48 2011] 32.073680 total counts/ 3.184980 bgd. counts: snr = 16.187309
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.005281 pixels
  Position = (719.0, 352.1) = 17 41 47.71 -28 22 10.2
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 28.9 +/- 5.7
  Background counts = 3.2
  Rate = 0.002 +/- 0.0004
[Fri Oct 28 17:23:48 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 17:23:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 17:23:48 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 17:23:48 2011] Source does appear to be extended
[Fri Oct 28 17:23:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 17:25:40 2011] Not overwriting source region fullrun_ccd3_acisf08204_pi14-548_pass1_cl_src4_src.reg
[Fri Oct 28 17:25:40 2011] Extracting stamp from image fullrun_ccd3_acisf08204_pi14-548_cl_sm2.00.img.gz, (694, 327) - (744, 377)
[Fri Oct 28 17:25:40 2011] Writing fullrun_ccd3_acisf08204_pi14-548_pass1_cl_src4.gif
[Fri Oct 28 17:25:41 2011] ../../acisf08204/products/events/fullrun_ccd3_acisf08204_pi14-548_pass1_cl_src4_src.evt and ../../acisf08204/products/events/fullrun_ccd3_acisf08204_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Fri Oct 28 17:25:41 2011] Size of ../../acisf08204/products/events/fullrun_ccd3_acisf08204_pi14-548_pass1_cl_src4_src.evt.gz[events] = 30 counts
[Fri Oct 28 17:25:41 2011] Mean chipx,y = (700.97, 697.60)
[Fri Oct 28 17:25:41 2011] Mean tdetx,y = (4434.40, 3761.97)
[Fri Oct 28 17:25:41 2011] chipx,y range = (682.00-716.00, 678.00-712.00)
[Fri Oct 28 17:25:41 2011] Size of ../../acisf08204/products/events/fullrun_ccd3_acisf08204_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 5 counts
[Fri Oct 28 17:25:41 2011] ../../acisf08204/products/images/fullrun_ccd3_acisf08204_pi14-548_pass1_cl_src4_src.img and ../../acisf08204/products/images/fullrun_ccd3_acisf08204_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Fri Oct 28 17:25:41 2011] ../../acisf08204/products/spectra/fullrun_ccd3_acisf08204_pi14-548_pass1_cl_src4_src.pi and ../../acisf08204/products/spectra/fullrun_ccd3_acisf08204_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Fri Oct 28 17:25:41 2011] Not generating rmf since there are only 28 counts
[Fri Oct 28 17:25:44 2011] ../../acisf08204/products/lightcurves/fullrun_ccd3_acisf08204_pi14-548_pass1_cl_src4_src.lc and ../../acisf08204/products/lightcurves/fullrun_ccd3_acisf08204_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Fri Oct 28 17:26:35 2011] 194.256
[Fri Oct 28 17:26:41 2011] Updating aperture counts using extracted products
[Fri Oct 28 17:26:41 2011] Error reading totcts from fullrun_ccd3_acisf08204_pi14-548_pass1_cl_src4_src.pi.gz
[Fri Oct 28 17:26:41 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 17:26:41 2011] Using photon index=1.80, rate=0.00194, arf fullrun_ccd3_acisf08204_pi14-548_pass1_cl_src4.arf
[Fri Oct 28 17:26:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 17:26:41 2011] Updating source flux to 2.8e-14
[Fri Oct 28 17:26:49 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 28 17:26:50 2011] acisf08204/analysis//spectral/fullrun_ccd3_acisf08204_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete