[Fri Sep 30 10:36:58 2011] Detection parameters:
  Position = (651.2, 462.6) = 17 41 4.90 -28 15 3.5
  Extent = 0.7" x 0.5", rotation angle = 52 degrees
  Source counts = 463.3 +/- 21.6
  Background counts = 3.7
  Rate = 0.03 +/- 0.002

[Fri Sep 30 10:36:59 2011] Off-axis axis estimate = 4.46'
[Fri Sep 30 10:37:38 2011] Using EEF radius (= 0.98 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 10:37:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 10:37:38 2011] Initial guess for spatial extent in simple fitting = 0.98"
[Fri Sep 30 10:37:38 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.007
[Fri Sep 30 10:37:38 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.98"
[Fri Sep 30 10:37:39 2011] fullrun_ccd3_acisf08201_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 30 10:37:39 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf08201_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 10:37:39 2011] fullrun_ccd3_acisf08201_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 30 10:37:39 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf08201_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 10:37:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08201_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08201_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 10:37:39 2011] fullrun_ccd3_acisf08201_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 10:37:39 2011] fullrun_ccd3_acisf08201_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 10:37:39 2011] Fit fullrun_ccd3_acisf08201_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 10:37:46 2011] Spatial fit model total counts = 462.669000, observed total counts = 466.000000
[Fri Sep 30 10:37:46 2011] Offset between fit and detection position for source 6 = 0.651854 pixels
[Fri Sep 30 10:37:46 2011] 465.604000 total counts/ 39.682000 bgd. counts: snr = 67.613481
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.651854 pixels
  Position = (651.6, 463.1) = 17 41 4.90 -28 15 3.5
  Extent = 0.7 (0.7-0.8)", rotation angle = 0
  Source counts = 425.9 +/- 21.6
  Background counts = 39.7
  Rate = 0.03 +/- 0.002
[Fri Sep 30 10:37:46 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 10:37:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 10:37:46 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 10:37:46 2011] Source does appear to be extended
[Fri Sep 30 10:37:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 10:37:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 10:37:58 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 10:37:58 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Fri Sep 30 10:37:58 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.996
[Fri Sep 30 10:37:58 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.74"
[Fri Sep 30 10:37:58 2011] fullrun_ccd3_acisf08201_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 30 10:37:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08201_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 10:37:59 2011] fullrun_ccd3_acisf08201_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 30 10:37:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08201_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 10:37:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08201_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08201_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 10:38:00 2011] fullrun_ccd3_acisf08201_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 10:38:01 2011] fullrun_ccd3_acisf08201_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 10:38:01 2011] Fit fullrun_ccd3_acisf08201_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 10:38:08 2011] Spatial fit model total counts = 465.395000, observed total counts = 466.000000
[Fri Sep 30 10:38:08 2011] Offset between fit and detection position for source 6 = 0.010095 pixels
[Fri Sep 30 10:38:08 2011] 467.972300 total counts/ 41.252300 bgd. counts: snr = 66.438362
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.010095 pixels
  Position = (651.6, 463.1) = 17 41 4.90 -28 15 3.5
  Extent = 0.7 (0.7-0.8)", rotation angle = 0
  Source counts = 426.7 +/- 21.6
  Background counts = 41.3
  Rate = 0.03 +/- 0.002
[Fri Sep 30 10:38:08 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 10:38:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 10:38:08 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 10:38:08 2011] Source does appear to be extended
[Fri Sep 30 10:38:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 10:39:41 2011] Not overwriting source region fullrun_ccd3_acisf08201_pi14-548_pass1_cl_src6_src.reg
[Fri Sep 30 10:39:41 2011] Extracting stamp from image fullrun_ccd3_acisf08201_pi14-548_cl_sm2.00.img.gz, (618, 430) - (685, 496)
[Fri Sep 30 10:39:41 2011] Writing fullrun_ccd3_acisf08201_pi14-548_pass1_cl_src6.gif
[Fri Sep 30 10:39:41 2011] ../../acisf08201/products/events/fullrun_ccd3_acisf08201_pi14-548_pass1_cl_src6_src.evt and ../../acisf08201/products/events/fullrun_ccd3_acisf08201_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Fri Sep 30 10:39:41 2011] Size of ../../acisf08201/products/events/fullrun_ccd3_acisf08201_pi14-548_pass1_cl_src6_src.evt.gz[events] = 454 counts
[Fri Sep 30 10:39:41 2011] Mean chipx,y = (618.49, 593.79)
[Fri Sep 30 10:39:41 2011] Mean tdetx,y = (4538.21, 3679.49)
[Fri Sep 30 10:39:41 2011] chipx,y range = (601.00-639.00, 573.00-612.00)
[Fri Sep 30 10:39:41 2011] Size of ../../acisf08201/products/events/fullrun_ccd3_acisf08201_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 10 counts
[Fri Sep 30 10:39:41 2011] ../../acisf08201/products/images/fullrun_ccd3_acisf08201_pi14-548_pass1_cl_src6_src.img and ../../acisf08201/products/images/fullrun_ccd3_acisf08201_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Fri Sep 30 10:39:41 2011] ../../acisf08201/products/spectra/fullrun_ccd3_acisf08201_pi14-548_pass1_cl_src6_src.pi and ../../acisf08201/products/spectra/fullrun_ccd3_acisf08201_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Fri Sep 30 10:39:44 2011] ../../acisf08201/products/lightcurves/fullrun_ccd3_acisf08201_pi14-548_pass1_cl_src6_src.lc and ../../acisf08201/products/lightcurves/fullrun_ccd3_acisf08201_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Fri Sep 30 10:39:47 2011] Keeping rmf generated by specextract
[Fri Sep 30 10:39:47 2011] 189.237
[Fri Sep 30 10:39:49 2011] Updating aperture counts using extracted products
[Fri Sep 30 10:39:49 2011] Error reading totcts from fullrun_ccd3_acisf08201_pi14-548_pass1_cl_src6_src.pi.gz
[Fri Sep 30 10:39:49 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 10:39:49 2011] Using photon index=1.80, rate=0.0298, arf fullrun_ccd3_acisf08201_pi14-548_pass1_cl_src6.arf
[Fri Sep 30 10:39:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 10:39:49 2011] Updating source flux to 4.3e-13
[Fri Sep 30 10:40:08 2011] Reading fit data from acisf08201/analysis//spectral/fullrun_ccd3_acisf08201_pi14-548_pass1_cl_src6_pl.csv
[Fri Sep 30 10:40:08 2011] Spectral fit parameter nH value = 3.77759e+21
[Fri Sep 30 10:40:08 2011] Spectral fit parameter PhoIndex value = 5.76121
[Fri Sep 30 10:40:08 2011] Failed to get F(0.3-8.0) from acisf08201/analysis//spectral/fullrun_ccd3_acisf08201_pi14-548_pass1_cl_src6_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 10:40:08 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 10:40:08 2011] Using Nh = 3.8e+21, photon index=5.76, rate=0.0298, arf fullrun_ccd3_acisf08201_pi14-548_pass1_cl_src6.arf
[Fri Sep 30 10:40:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 10:40:08 2011] Updating source flux to 3.1e-13