[Fri Sep 30 10:36:56 2011] Detection parameters:
  Position = (208.5, 151.5) = 17 40 42.73 -28 18 8.1
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 751.7 +/- 28.7
  Background counts = 73.3
  Rate = 0.05 +/- 0.002

[Fri Sep 30 10:36:57 2011] Off-axis axis estimate = 2.44'
[Fri Sep 30 10:37:37 2011] Using EEF radius (= 0.48 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 10:37:37 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Fri Sep 30 10:37:37 2011] source mask rpix=1.0, npix_max = 8, mask sum = 6, frac = 0.681
[Fri Sep 30 10:37:37 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.48"
[Fri Sep 30 10:37:37 2011] fullrun_ccd1_acisf08201_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 30 10:37:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08201_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 10:37:37 2011] fullrun_ccd1_acisf08201_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 30 10:37:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08201_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 10:37:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf08201_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf08201_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 10:37:38 2011] fullrun_ccd1_acisf08201_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 10:37:38 2011] fullrun_ccd1_acisf08201_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 10:37:38 2011] Fit fullrun_ccd1_acisf08201_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 10:37:44 2011] Spatial fit model total counts = 2825.530000, observed total counts = 2931.000000
[Fri Sep 30 10:37:44 2011] Offset between fit and detection position for source 15 = 1.911916 pixels
[Fri Sep 30 10:37:44 2011] 2811.768000 total counts/ 427.448000 bgd. counts: snr = 115.324850
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 1.911916 pixels
  Position = (206.7, 152.0) = 17 40 42.82 -28 18 8.1
  Extent = 1.2 (1.1-1.2)", rotation angle = 0
  Source counts = 2384.3 +/- 53.0
  Background counts = 427.4
  Rate = 0.2 +/- 0.004
[Fri Sep 30 10:37:44 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 10:37:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 10:37:44 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 10:37:44 2011] Source does appear to be extended
[Fri Sep 30 10:37:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 10:37:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 10:37:57 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 10:37:57 2011] Initial guess for spatial extent in simple fitting = 1.17"
[Fri Sep 30 10:37:57 2011] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.904
[Fri Sep 30 10:37:57 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.17"
[Fri Sep 30 10:37:57 2011] fullrun_ccd1_acisf08201_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 30 10:37:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08201_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 10:37:58 2011] fullrun_ccd1_acisf08201_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 30 10:37:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08201_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 10:37:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf08201_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf08201_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 10:37:58 2011] fullrun_ccd1_acisf08201_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 10:37:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08201_pi14-548_cl_pass1_tfrozen_src1.csv
[Fri Sep 30 10:37:58 2011] fullrun_ccd1_acisf08201_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 10:37:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08201_pi14-548_cl_pass1_tfrozen_src1.csv
[Fri Sep 30 10:37:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf08201_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf08201_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 10:38:04 2011] Warning, spatial fit 1 centroid is now closest to src. 17
[Fri Sep 30 10:38:04 2011] Source 1 in spatial fitting is no longer close to this source
[Fri Sep 30 10:38:04 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 10:38:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 10:38:04 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 10:38:04 2011] Source does appear to be extended
[Fri Sep 30 10:38:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 10:38:33 2011] Not overwriting source region fullrun_ccd1_acisf08201_pi14-548_pass1_cl_src15_src.reg
[Fri Sep 30 10:38:33 2011] Extracting stamp from image fullrun_ccd1_acisf08201_pi14-548_cl_sm2.00.img.gz, (153, 98) - (260, 206)
[Fri Sep 30 10:38:33 2011] Writing fullrun_ccd1_acisf08201_pi14-548_pass1_cl_src15.gif
[Fri Sep 30 10:38:35 2011] ../../acisf08201/products/events/fullrun_ccd1_acisf08201_pi14-548_pass1_cl_src15_src.evt and ../../acisf08201/products/events/fullrun_ccd1_acisf08201_pi14-548_pass1_cl_src15_bgd.evt exist, delete to re-create
[Fri Sep 30 10:38:36 2011] Size of ../../acisf08201/products/events/fullrun_ccd1_acisf08201_pi14-548_pass1_cl_src15_src.evt.gz[events] = 3000 counts
[Fri Sep 30 10:38:36 2011] Mean chipx,y = (190.58, 929.93)
[Fri Sep 30 10:38:36 2011] Mean tdetx,y = (4202.07, 4297.58)
[Fri Sep 30 10:38:36 2011] chipx,y range = (167.00-216.00, 904.00-955.00)
[Fri Sep 30 10:38:36 2011] Size of ../../acisf08201/products/events/fullrun_ccd1_acisf08201_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 722 counts
[Fri Sep 30 10:38:36 2011] ../../acisf08201/products/images/fullrun_ccd1_acisf08201_pi14-548_pass1_cl_src15_src.img and ../../acisf08201/products/images/fullrun_ccd1_acisf08201_pi14-548_pass1_cl_src15_bgd.img exist, delete to re-create
[Fri Sep 30 10:38:36 2011] ../../acisf08201/products/spectra/fullrun_ccd1_acisf08201_pi14-548_pass1_cl_src15_src.pi and ../../acisf08201/products/spectra/fullrun_ccd1_acisf08201_pi14-548_pass1_cl_src15_bgd.pi exist, delete to re-create
[Fri Sep 30 10:38:41 2011] ../../acisf08201/products/lightcurves/fullrun_ccd1_acisf08201_pi14-548_pass1_cl_src15_src.lc and ../../acisf08201/products/lightcurves/fullrun_ccd1_acisf08201_pi14-548_pass1_cl_src15_bgd.lc exist, delete to re-create
[Fri Sep 30 10:38:41 2011] Keeping rmf generated by specextract
[Fri Sep 30 10:38:41 2011] 199.277
[Fri Sep 30 10:39:48 2011] Updating aperture counts using extracted products
[Fri Sep 30 10:39:49 2011] Error reading totcts from fullrun_ccd1_acisf08201_pi14-548_pass1_cl_src15_src.pi.gz
[Fri Sep 30 10:39:49 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 10:39:49 2011] Using photon index=1.80, rate=0.167, arf fullrun_ccd1_acisf08201_pi14-548_pass1_cl_src15.arf
[Fri Sep 30 10:39:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 10:39:49 2011] Updating source flux to 2.3e-12
[Fri Sep 30 10:40:02 2011] Reading fit data from acisf08201/analysis//spectral/fullrun_ccd1_acisf08201_pi14-548_pass1_cl_src15_pl.csv
[Fri Sep 30 10:40:02 2011] Spectral fit parameter nH value = 1.69698e+22
[Fri Sep 30 10:40:02 2011] Spectral fit parameter PhoIndex value = 1.20309
[Fri Sep 30 10:40:02 2011] Failed to get F(0.3-8.0) from acisf08201/analysis//spectral/fullrun_ccd1_acisf08201_pi14-548_pass1_cl_src15_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 10:40:02 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 10:40:02 2011] Using Nh = 1.7e+22, photon index=1.20, rate=0.167, arf fullrun_ccd1_acisf08201_pi14-548_pass1_cl_src15.arf
[Fri Sep 30 10:40:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 10:40:02 2011] Updating source flux to 3.5e-12