[Fri Sep 30 10:36:56 2011] Detection parameters:
  Position = (240.2, 674.3) = 17 40 41.56 -28 13 50.9
  Extent = 0.8" x 0.5", rotation angle = 84 degrees
  Source counts = 12.2 +/- 3.6
  Background counts = 0.8
  Rate = 0.0009 +/- 0.0003

[Fri Sep 30 10:36:57 2011] Off-axis axis estimate = 5.56'
[Fri Sep 30 10:37:37 2011] Using EEF radius (= 1.42 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 10:37:37 2011] Initial guess for spatial extent in simple fitting = 1.42"
[Fri Sep 30 10:37:37 2011] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.071
[Fri Sep 30 10:37:37 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 1.42"
[Fri Sep 30 10:37:38 2011] fullrun_ccd1_acisf08201_pi14-548_cl_pass0_src7.ximg exists
[Fri Sep 30 10:37:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08201_pi14-548_cl_pass0_src7.csv
[Fri Sep 30 10:37:38 2011] fullrun_ccd1_acisf08201_pi14-548_cl_pass0_src7_1.ximg exists
[Fri Sep 30 10:37:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08201_pi14-548_cl_pass0_src7.csv
[Fri Sep 30 10:37:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf08201_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf08201_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 10:37:38 2011] fullrun_ccd1_acisf08201_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Fri Sep 30 10:37:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08201_pi14-548_cl_pass0_tfrozen_src7.csv
[Fri Sep 30 10:37:38 2011] fullrun_ccd1_acisf08201_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Sep 30 10:37:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08201_pi14-548_cl_pass0_tfrozen_src7.csv
[Fri Sep 30 10:37:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf08201_pi14-548_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf08201_pi14-548_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 10:37:44 2011] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 11.906294 pixels away
[Fri Sep 30 10:37:44 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 10:37:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 10:37:44 2011] Assessing source extent using major
[Fri Sep 30 10:37:44 2011] Source does appear to be extended
[Fri Sep 30 10:37:44 2011] Computing asymmetry using major and minor axis, asym = 1.65
[Fri Sep 30 10:37:44 2011] Source is asymmetric
[Fri Sep 30 10:37:45 2011] Deleting source due to low Poisson probability 0.7