[Fri Sep 30 10:36:54 2011] Detection parameters:
  Position = (387.3, 178.0) = 17 40 36.07 -28 17 55.0
  Extent = 0.8" x 0.5", rotation angle = 6 degrees
  Source counts = 29.3 +/- 5.6
  Background counts = 1.7
  Rate = 0.002 +/- 0.0004

[Fri Sep 30 10:36:57 2011] Off-axis axis estimate = 3.92'
[Fri Sep 30 10:37:37 2011] Using EEF radius (= 0.81 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 10:37:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 10:37:37 2011] Initial guess for spatial extent in simple fitting = 0.81"
[Fri Sep 30 10:37:37 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.874
[Fri Sep 30 10:37:37 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.81"
[Fri Sep 30 10:37:37 2011] fullrun_ccd1_acisf08201_pi14-548_cl_pass0_src2.ximg exists
[Fri Sep 30 10:37:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08201_pi14-548_cl_pass0_src2.csv
[Fri Sep 30 10:37:37 2011] fullrun_ccd1_acisf08201_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Sep 30 10:37:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08201_pi14-548_cl_pass0_src2.csv
[Fri Sep 30 10:37:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf08201_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf08201_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 10:37:38 2011] fullrun_ccd1_acisf08201_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Sep 30 10:37:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08201_pi14-548_cl_pass0_tfrozen_src2.csv
[Fri Sep 30 10:37:38 2011] fullrun_ccd1_acisf08201_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Sep 30 10:37:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08201_pi14-548_cl_pass0_tfrozen_src2.csv
[Fri Sep 30 10:37:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf08201_pi14-548_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf08201_pi14-548_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 10:37:44 2011] Spatial fit model total counts = 23.918800, observed total counts = 36.000000
[Fri Sep 30 10:37:44 2011] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Sep 30 10:37:44 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 10:37:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 10:37:44 2011] Assessing source extent using major
[Fri Sep 30 10:37:44 2011] Source does appear to be extended
[Fri Sep 30 10:37:44 2011] Computing asymmetry using major and minor axis, asym = 1.59
[Fri Sep 30 10:37:44 2011] Source is asymmetric
[Fri Sep 30 10:37:45 2011] Deleting source due to low Poisson probability 0.9