[Thu Sep 29 16:03:40 2011] Detection parameters:
  Position = (479.3, 205.3) = 6 1 23.03 -23 31 51.7
  Extent = 2.3" x 2.0", rotation angle = 75 degrees
  Source counts = 147.2 +/- 13.3
  Background counts = 28.8
  Rate = 0.004 +/- 0.0003

[Thu Sep 29 16:03:41 2011] Off-axis axis estimate = 9.40'
[Thu Sep 29 16:04:44 2011] Using EEF radius (= 3.90 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 16:04:44 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 16:04:44 2011] Initial guess for spatial extent in simple fitting = 3.90"
[Thu Sep 29 16:04:44 2011] source mask rpix=7.9, npix_max = 284, mask sum = 289, frac = 1.015
[Thu Sep 29 16:04:44 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.90"
[Thu Sep 29 16:04:45 2011] fullrun_ccd3_acisf08196_pi14-548_cl_pass0_src1.ximg exists
[Thu Sep 29 16:04:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08196_pi14-548_cl_pass0_src1.csv
[Thu Sep 29 16:04:45 2011] fullrun_ccd3_acisf08196_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Sep 29 16:04:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08196_pi14-548_cl_pass0_src1.csv
[Thu Sep 29 16:04:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08196_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08196_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 16:04:45 2011] fullrun_ccd3_acisf08196_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 29 16:04:45 2011] fullrun_ccd3_acisf08196_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 29 16:04:45 2011] Fit fullrun_ccd3_acisf08196_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 29 16:05:05 2011] Spatial fit model total counts = 199.678000, observed total counts = 200.000000
[Thu Sep 29 16:05:05 2011] Offset between fit and detection position for source 6 = 1.255803 pixels
[Thu Sep 29 16:05:05 2011] 199.413000 total counts/ 44.281000 bgd. counts: snr = 23.312706
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.255803 pixels
  Position = (479.9, 206.4) = 6 1 23.03 -23 31 51.4
  Extent = 3.4 (3.0-3.8)", rotation angle = 0
  Source counts = 155.1 +/- 14.1
  Background counts = 44.3
  Rate = 0.004 +/- 0.0004
[Thu Sep 29 16:05:05 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 16:05:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 16:05:05 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 16:05:05 2011] Source does appear to be extended
[Thu Sep 29 16:05:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 16:05:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 16:05:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 16:05:33 2011] Initial guess for spatial extent in simple fitting = 3.35"
[Thu Sep 29 16:05:33 2011] source mask rpix=6.8, npix_max = 214, mask sum = 210, frac = 0.980
[Thu Sep 29 16:05:33 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.35"
[Thu Sep 29 16:05:33 2011] fullrun_ccd3_acisf08196_pi14-548_cl_pass1_src1.ximg exists
[Thu Sep 29 16:05:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08196_pi14-548_cl_pass1_src1.csv
[Thu Sep 29 16:05:33 2011] fullrun_ccd3_acisf08196_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Sep 29 16:05:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08196_pi14-548_cl_pass1_src1.csv
[Thu Sep 29 16:05:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08196_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08196_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 16:05:33 2011] fullrun_ccd3_acisf08196_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 29 16:05:33 2011] fullrun_ccd3_acisf08196_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 29 16:05:33 2011] Fit fullrun_ccd3_acisf08196_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 29 16:05:42 2011] Spatial fit model total counts = 183.999000, observed total counts = 184.000000
[Thu Sep 29 16:05:42 2011] Offset between fit and detection position for source 6 = 0.322771 pixels
[Thu Sep 29 16:05:42 2011] 184.215200 total counts/ 26.004200 bgd. counts: snr = 31.025224
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.322771 pixels
  Position = (479.6, 206.3) = 6 1 23.04 -23 31 51.4
  Extent = 3.4 (3.0-3.9)", rotation angle = 0
  Source counts = 158.2 +/- 13.6
  Background counts = 26.0
  Rate = 0.004 +/- 0.0004
[Thu Sep 29 16:05:42 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 16:05:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 16:05:42 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 16:05:42 2011] Source does appear to be extended
[Thu Sep 29 16:05:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 16:06:13 2011] Not overwriting source region fullrun_ccd3_acisf08196_pi14-548_pass1_cl_src6_src.reg
[Thu Sep 29 16:06:13 2011] Extracting stamp from image fullrun_ccd3_acisf08196_pi14-548_cl_sm2.00.img.gz, (325, 52) - (634, 361)
[Thu Sep 29 16:06:13 2011] Writing fullrun_ccd3_acisf08196_pi14-548_pass1_cl_src6.gif
[Thu Sep 29 16:06:14 2011] ../../acisf08196/products/events/fullrun_ccd3_acisf08196_pi14-548_pass1_cl_src6_src.evt and ../../acisf08196/products/events/fullrun_ccd3_acisf08196_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Thu Sep 29 16:06:14 2011] Size of ../../acisf08196/products/events/fullrun_ccd3_acisf08196_pi14-548_pass1_cl_src6_src.evt.gz[events] = 180 counts
[Thu Sep 29 16:06:14 2011] Mean chipx,y = (142.87, 463.83)
[Thu Sep 29 16:06:14 2011] Mean tdetx,y = (4668.17, 3203.87)
[Thu Sep 29 16:06:14 2011] chipx,y range = (108.00-168.00, 429.00-496.00)
[Thu Sep 29 16:06:14 2011] Size of ../../acisf08196/products/events/fullrun_ccd3_acisf08196_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 313 counts
[Thu Sep 29 16:06:14 2011] ../../acisf08196/products/images/fullrun_ccd3_acisf08196_pi14-548_pass1_cl_src6_src.img and ../../acisf08196/products/images/fullrun_ccd3_acisf08196_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Thu Sep 29 16:06:14 2011] ../../acisf08196/products/spectra/fullrun_ccd3_acisf08196_pi14-548_pass1_cl_src6_src.pi and ../../acisf08196/products/spectra/fullrun_ccd3_acisf08196_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Thu Sep 29 16:06:17 2011] ../../acisf08196/products/lightcurves/fullrun_ccd3_acisf08196_pi14-548_pass1_cl_src6_src.lc and ../../acisf08196/products/lightcurves/fullrun_ccd3_acisf08196_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Thu Sep 29 16:06:29 2011] Keeping rmf generated by specextract
[Thu Sep 29 16:06:29 2011] 168.264
[Thu Sep 29 16:09:45 2011] Updating aperture counts using extracted products
[Thu Sep 29 16:09:45 2011] Error reading totcts from fullrun_ccd3_acisf08196_pi14-548_pass1_cl_src6_src.pi.gz
[Thu Sep 29 16:09:45 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 16:09:45 2011] Using photon index=1.80, rate=0.0041, arf fullrun_ccd3_acisf08196_pi14-548_pass1_cl_src6.arf
[Thu Sep 29 16:09:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 16:09:45 2011] Updating source flux to 5.6e-14
[Thu Sep 29 16:09:56 2011] Reading fit data from acisf08196/analysis//spectral/fullrun_ccd3_acisf08196_pi14-548_pass1_cl_src6_pl.csv
[Thu Sep 29 16:09:56 2011] Spectral fit parameter nH value = 2.01752e+15
[Thu Sep 29 16:09:56 2011] Spectral fit parameter PhoIndex value = 1.89629
[Thu Sep 29 16:09:56 2011] Failed to get F(0.3-8.0) from acisf08196/analysis//spectral/fullrun_ccd3_acisf08196_pi14-548_pass1_cl_src6_pl.csv, possibly due to different flux energy range selected
[Thu Sep 29 16:09:56 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 16:09:56 2011] Using Nh = 2e+15, photon index=1.90, rate=0.0041, arf fullrun_ccd3_acisf08196_pi14-548_pass1_cl_src6.arf
[Thu Sep 29 16:09:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 16:09:56 2011] Updating source flux to 5.8e-14