[Sun Oct 16 00:50:51 2011] Detection parameters:
  Position = (707.9, 807.6) = 16 17 12.25 34 57 42.2
  Extent = 1.1" x 0.6", rotation angle = 4 degrees
  Source counts = 48.3 +/- 7.2
  Background counts = 3.7
  Rate = 0.002 +/- 0.0003

[Sun Oct 16 00:50:52 2011] Off-axis axis estimate = 3.85'
[Sun Oct 16 00:51:36 2011] Using EEF radius (= 0.79 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 00:51:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 16 00:51:36 2011] Initial guess for spatial extent in simple fitting = 0.79"
[Sun Oct 16 00:51:36 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.908
[Sun Oct 16 00:51:36 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.79"
[Sun Oct 16 00:51:37 2011] fullrun_ccd7_acisf08180_pi14-548_cl_pass0_src3.ximg exists
[Sun Oct 16 00:51:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf08180_pi14-548_cl_pass0_src3.csv
[Sun Oct 16 00:51:37 2011] fullrun_ccd7_acisf08180_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Oct 16 00:51:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf08180_pi14-548_cl_pass0_src3.csv
[Sun Oct 16 00:51:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf08180_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf08180_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 00:51:37 2011] fullrun_ccd7_acisf08180_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Oct 16 00:51:37 2011] fullrun_ccd7_acisf08180_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Oct 16 00:51:37 2011] Fit fullrun_ccd7_acisf08180_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Oct 16 00:51:42 2011] Spatial fit model total counts = 53.008900, observed total counts = 54.000000
[Sun Oct 16 00:51:42 2011] Offset between fit and detection position for source 3 = 1.461943 pixels
[Sun Oct 16 00:51:42 2011] 51.489860 total counts/ 5.516360 bgd. counts: snr = 19.574076
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.461943 pixels
  Position = (709.3, 808.2) = 16 17 12.21 34 57 42.3
  Extent = 0.9 (0.7-1.0)", rotation angle = 0
  Source counts = 46.0 +/- 7.2
  Background counts = 5.5
  Rate = 0.002 +/- 0.0003
[Sun Oct 16 00:51:42 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 00:51:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 00:51:42 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 00:51:42 2011] Source does appear to be extended
[Sun Oct 16 00:51:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 00:51:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 16 00:51:57 2011] Initial guess for spatial extent in simple fitting = 0.91"
[Sun Oct 16 00:51:57 2011] source mask rpix=1.8, npix_max = 22, mask sum = 25, frac = 1.133
[Sun Oct 16 00:51:57 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.91"
[Sun Oct 16 00:51:58 2011] fullrun_ccd7_acisf08180_pi14-548_cl_pass1_src3.ximg exists
[Sun Oct 16 00:51:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf08180_pi14-548_cl_pass1_src3.csv
[Sun Oct 16 00:51:58 2011] fullrun_ccd7_acisf08180_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Oct 16 00:51:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf08180_pi14-548_cl_pass1_src3.csv
[Sun Oct 16 00:51:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf08180_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf08180_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 00:51:59 2011] fullrun_ccd7_acisf08180_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Oct 16 00:51:59 2011] fullrun_ccd7_acisf08180_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Oct 16 00:51:59 2011] Fit fullrun_ccd7_acisf08180_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Oct 16 00:52:05 2011] Spatial fit model total counts = 49.990800, observed total counts = 54.000000
[Sun Oct 16 00:52:05 2011] Offset between fit and detection position for source 3 = 0.170410 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.170410 pixels
  Position = (709.5, 808.2) = 16 17 12.20 34 57 42.3
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 47.1 +/- 6.9
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Sun Oct 16 00:52:05 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 00:52:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 00:52:05 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 00:52:05 2011] Source does appear to be extended
[Sun Oct 16 00:52:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 00:52:52 2011] Not overwriting source region fullrun_ccd7_acisf08180_pi14-548_pass1_cl_src3_src.reg
[Sun Oct 16 00:52:52 2011] Extracting stamp from image fullrun_ccd7_acisf08180_pi14-548_cl_sm2.00.img.gz, (667, 766) - (752, 850)
[Sun Oct 16 00:52:52 2011] Writing fullrun_ccd7_acisf08180_pi14-548_pass1_cl_src3.gif
[Sun Oct 16 00:53:00 2011] ../../acisf08180/products/events/fullrun_ccd7_acisf08180_pi14-548_pass1_cl_src3_src.evt and ../../acisf08180/products/events/fullrun_ccd7_acisf08180_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sun Oct 16 00:53:00 2011] Size of ../../acisf08180/products/events/fullrun_ccd7_acisf08180_pi14-548_pass1_cl_src3_src.evt.gz[events] = 51 counts
[Sun Oct 16 00:53:00 2011] Mean chipx,y = (659.69, 498.63)
[Sun Oct 16 00:53:00 2011] Mean tdetx,y = (4576.69, 2200.63)
[Sun Oct 16 00:53:00 2011] chipx,y range = (639.00-676.00, 481.00-521.00)
[Sun Oct 16 00:53:00 2011] Size of ../../acisf08180/products/events/fullrun_ccd7_acisf08180_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 50 counts
[Sun Oct 16 00:53:00 2011] ../../acisf08180/products/images/fullrun_ccd7_acisf08180_pi14-548_pass1_cl_src3_src.img and ../../acisf08180/products/images/fullrun_ccd7_acisf08180_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sun Oct 16 00:53:00 2011] ../../acisf08180/products/spectra/fullrun_ccd7_acisf08180_pi14-548_pass1_cl_src3_src.pi and ../../acisf08180/products/spectra/fullrun_ccd7_acisf08180_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sun Oct 16 00:53:00 2011] Not generating rmf since there are only 47 counts
[Sun Oct 16 00:53:03 2011] ../../acisf08180/products/lightcurves/fullrun_ccd7_acisf08180_pi14-548_pass1_cl_src3_src.lc and ../../acisf08180/products/lightcurves/fullrun_ccd7_acisf08180_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sun Oct 16 00:53:31 2011] 221.78
[Sun Oct 16 00:53:33 2011] Updating aperture counts using extracted products
[Sun Oct 16 00:53:33 2011] Error reading totcts from fullrun_ccd7_acisf08180_pi14-548_pass1_cl_src3_src.pi.gz
[Sun Oct 16 00:53:33 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 00:53:33 2011] Using photon index=1.80, rate=0.00225, arf fullrun_ccd7_acisf08180_pi14-548_pass1_cl_src3.arf
[Sun Oct 16 00:53:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 00:53:33 2011] Updating source flux to 1.7e-14
[Sun Oct 16 00:53:39 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting