[Fri Oct  7 12:11:45 2011] Detection parameters:
  Position = (885.0, 227.3) = 10 1 1.01 2 19 50.1
  Extent = 0.6" x 0.5", rotation angle = 82 degrees
  Source counts = 10.8 +/- 3.5
  Background counts = 1.2
  Rate = 0.0002 +/- 7e-05

[Fri Oct  7 12:11:46 2011] Off-axis axis estimate = 2.51'
[Fri Oct  7 12:13:08 2011] Using EEF radius (= 0.49 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 12:13:08 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Fri Oct  7 12:13:08 2011] source mask rpix=1.0, npix_max = 9, mask sum = 12, frac = 1.329
[Fri Oct  7 12:13:08 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 0.49"
[Fri Oct  7 12:13:09 2011] fullrun_ccd3_acisf08123_pi14-548_cl_pass0_src21.ximg exists
[Fri Oct  7 12:13:09 2011] fullrun_ccd3_acisf08123_pi14-548_cl_pass0_src21_1.ximg exists
[Fri Oct  7 12:13:09 2011] Fit fullrun_ccd3_acisf08123_pi14-548_cl_pass0_src21 appears to have run properly
[Fri Oct  7 12:13:09 2011] fullrun_ccd3_acisf08123_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Fri Oct  7 12:13:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08123_pi14-548_cl_pass0_tfrozen_src21.csv
[Fri Oct  7 12:13:09 2011] fullrun_ccd3_acisf08123_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Fri Oct  7 12:13:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08123_pi14-548_cl_pass0_tfrozen_src21.csv
[Fri Oct  7 12:13:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08123_pi14-548_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08123_pi14-548_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 12:13:36 2011] Spatial fit model total counts = 11.493600, observed total counts = 13.000000
[Fri Oct  7 12:13:36 2011] Offset between fit and detection position for source 28 = 0.590666 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.590666 pixels
  Position = (885.5, 227.7) = 10 1 1.01 2 19 50.0
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source counts = 12.1 +/- 3.5
  Background counts = 0.0
  Rate = 0.0002 +/- 7e-05
[Fri Oct  7 12:13:36 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 12:13:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 12:13:36 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 12:13:36 2011] Source does appear to be extended
[Fri Oct  7 12:13:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 12:14:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 12:14:05 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Fri Oct  7 12:14:05 2011] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.710
[Fri Oct  7 12:14:05 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 0.63"
[Fri Oct  7 12:14:06 2011] fullrun_ccd3_acisf08123_pi14-548_cl_pass1_src21.ximg exists
[Fri Oct  7 12:14:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08123_pi14-548_cl_pass1_src21.csv
[Fri Oct  7 12:14:06 2011] fullrun_ccd3_acisf08123_pi14-548_cl_pass1_src21_1.ximg exists
[Fri Oct  7 12:14:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08123_pi14-548_cl_pass1_src21.csv
[Fri Oct  7 12:14:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08123_pi14-548_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08123_pi14-548_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 12:14:08 2011] fullrun_ccd3_acisf08123_pi14-548_cl_pass1_tfrozen_src21.ximg exists
[Fri Oct  7 12:14:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08123_pi14-548_cl_pass1_tfrozen_src21.csv
[Fri Oct  7 12:14:08 2011] fullrun_ccd3_acisf08123_pi14-548_cl_pass1_tfrozen_src21_1.ximg exists
[Fri Oct  7 12:14:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08123_pi14-548_cl_pass1_tfrozen_src21.csv
[Fri Oct  7 12:14:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08123_pi14-548_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08123_pi14-548_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 12:14:27 2011] Spatial fit model total counts = 11.855000, observed total counts = 13.000000
[Fri Oct  7 12:14:27 2011] Offset between fit and detection position for source 28 = 0.070986 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.070986 pixels
  Position = (885.5, 227.6) = 10 1 1.01 2 19 50.0
  Extent = 0.6 (0.4-0.7)", rotation angle = 0
  Source counts = 12.6 +/- 3.5
  Background counts = 0.0
  Rate = 0.0003 +/- 7e-05
[Fri Oct  7 12:14:27 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 12:14:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 12:14:27 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 12:14:27 2011] Source does appear to be extended
[Fri Oct  7 12:14:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 12:19:32 2011] Not overwriting source region fullrun_ccd3_acisf08123_pi14-548_pass1_cl_src28_src.reg
[Fri Oct  7 12:19:32 2011] Extracting stamp from image fullrun_ccd3_acisf08123_pi14-548_cl_sm2.00.img.gz, (858, 201) - (913, 255)
[Fri Oct  7 12:19:32 2011] Writing fullrun_ccd3_acisf08123_pi14-548_pass1_cl_src28.gif
[Fri Oct  7 12:20:43 2011] ../../acisf08123/products/events/fullrun_ccd3_acisf08123_pi14-548_pass1_cl_src28_src.evt and ../../acisf08123/products/events/fullrun_ccd3_acisf08123_pi14-548_pass1_cl_src28_bgd.evt exist, delete to re-create
[Fri Oct  7 12:20:43 2011] Size of ../../acisf08123/products/events/fullrun_ccd3_acisf08123_pi14-548_pass1_cl_src28_src.evt.gz[events] = 12 counts
[Fri Oct  7 12:20:43 2011] Mean chipx,y = (653.92, 971.67)
[Fri Oct  7 12:20:43 2011] Mean tdetx,y = (4160.33, 3714.92)
[Fri Oct  7 12:20:43 2011] chipx,y range = (637.00-667.00, 958.00-991.00)
[Fri Oct  7 12:20:43 2011] Size of ../../acisf08123/products/events/fullrun_ccd3_acisf08123_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 12 counts
[Fri Oct  7 12:20:43 2011] ../../acisf08123/products/images/fullrun_ccd3_acisf08123_pi14-548_pass1_cl_src28_src.img and ../../acisf08123/products/images/fullrun_ccd3_acisf08123_pi14-548_pass1_cl_src28_bgd.img exist, delete to re-create
[Fri Oct  7 12:20:43 2011] ../../acisf08123/products/spectra/fullrun_ccd3_acisf08123_pi14-548_pass1_cl_src28_src.pi and ../../acisf08123/products/spectra/fullrun_ccd3_acisf08123_pi14-548_pass1_cl_src28_bgd.pi exist, delete to re-create
[Fri Oct  7 12:20:43 2011] Not generating rmf since there are only 12 counts
[Fri Oct  7 12:20:46 2011] ../../acisf08123/products/lightcurves/fullrun_ccd3_acisf08123_pi14-548_pass1_cl_src28_src.lc and ../../acisf08123/products/lightcurves/fullrun_ccd3_acisf08123_pi14-548_pass1_cl_src28_bgd.lc exist, delete to re-create
[Fri Oct  7 12:21:36 2011] 179.58
[Fri Oct  7 12:22:09 2011] Updating aperture counts using extracted products
[Fri Oct  7 12:22:09 2011] Error reading totcts from fullrun_ccd3_acisf08123_pi14-548_pass1_cl_src28_src.pi.gz
[Fri Oct  7 12:22:09 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 12:22:09 2011] Using photon index=1.80, rate=0.000256, arf fullrun_ccd3_acisf08123_pi14-548_pass1_cl_src28.arf
[Fri Oct  7 12:22:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 12:22:09 2011] Updating source flux to 3.3e-15
[Fri Oct  7 12:22:24 2011] Source 28 has fewer than 100.000000 counts, skipping spectral fitting