[Fri Oct  7 12:11:39 2011] Detection parameters:
  Position = (749.3, 924.4) = 10 0 56.70 2 17 21.1
  Extent = 0.7" x 0.5", rotation angle = 17 degrees
  Source counts = 23.2 +/- 5.0
  Background counts = 1.8
  Rate = 0.0005 +/- 0.0001

[Fri Oct  7 12:11:43 2011] Off-axis axis estimate = 3.08'
[Fri Oct  7 12:13:07 2011] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 12:13:07 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Fri Oct  7 12:13:07 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.768
[Fri Oct  7 12:13:07 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 0.60"
[Fri Oct  7 12:13:08 2011] fullrun_ccd2_acisf08123_pi14-548_cl_pass0_src7.ximg exists
[Fri Oct  7 12:13:08 2011] fullrun_ccd2_acisf08123_pi14-548_cl_pass0_src7_1.ximg exists
[Fri Oct  7 12:13:08 2011] Fit fullrun_ccd2_acisf08123_pi14-548_cl_pass0_src7 appears to have run properly
[Fri Oct  7 12:13:08 2011] fullrun_ccd2_acisf08123_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Fri Oct  7 12:13:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08123_pi14-548_cl_pass0_tfrozen_src7.csv
[Fri Oct  7 12:13:08 2011] fullrun_ccd2_acisf08123_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Oct  7 12:13:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08123_pi14-548_cl_pass0_tfrozen_src7.csv
[Fri Oct  7 12:13:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08123_pi14-548_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08123_pi14-548_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 12:13:33 2011] Spatial fit model total counts = 21.857500, observed total counts = 27.000000
[Fri Oct  7 12:13:33 2011] Offset between fit and detection position for source 6 = 0.515807 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.515807 pixels
  Position = (749.4, 924.9) = 10 0 56.71 2 17 21.1
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 22.3 +/- 4.7
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Fri Oct  7 12:13:33 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 12:13:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 12:13:33 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 12:13:33 2011] Source does appear to be extended
[Fri Oct  7 12:13:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 12:14:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 12:14:03 2011] Initial guess for spatial extent in simple fitting = 0.70"
[Fri Oct  7 12:14:03 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.088
[Fri Oct  7 12:14:03 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 0.70"
[Fri Oct  7 12:14:04 2011] fullrun_ccd2_acisf08123_pi14-548_cl_pass1_src7.ximg exists
[Fri Oct  7 12:14:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08123_pi14-548_cl_pass1_src7.csv
[Fri Oct  7 12:14:04 2011] fullrun_ccd2_acisf08123_pi14-548_cl_pass1_src7_1.ximg exists
[Fri Oct  7 12:14:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08123_pi14-548_cl_pass1_src7.csv
[Fri Oct  7 12:14:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08123_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08123_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 12:14:05 2011] fullrun_ccd2_acisf08123_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Fri Oct  7 12:14:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08123_pi14-548_cl_pass1_tfrozen_src7.csv
[Fri Oct  7 12:14:05 2011] fullrun_ccd2_acisf08123_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Oct  7 12:14:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08123_pi14-548_cl_pass1_tfrozen_src7.csv
[Fri Oct  7 12:14:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08123_pi14-548_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08123_pi14-548_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 12:14:23 2011] Spatial fit model total counts = 24.293000, observed total counts = 27.000000
[Fri Oct  7 12:14:23 2011] Offset between fit and detection position for source 6 = 0.072979 pixels
[Fri Oct  7 12:14:23 2011] 25.366050 total counts/ 2.034850 bgd. counts: snr = 16.355766
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.072979 pixels
  Position = (749.4, 924.9) = 10 0 56.71 2 17 21.0
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 23.3 +/- 5.0
  Background counts = 2.0
  Rate = 0.0005 +/- 0.0001
[Fri Oct  7 12:14:23 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 12:14:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 12:14:23 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 12:14:23 2011] Source does appear to be extended
[Fri Oct  7 12:14:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 12:17:36 2011] Not overwriting source region fullrun_ccd2_acisf08123_pi14-548_pass1_cl_src6_src.reg
[Fri Oct  7 12:17:36 2011] Extracting stamp from image fullrun_ccd2_acisf08123_pi14-548_cl_sm2.00.img.gz, (717, 893) - (782, 957)
[Fri Oct  7 12:17:36 2011] Writing fullrun_ccd2_acisf08123_pi14-548_pass1_cl_src6.gif
[Fri Oct  7 12:18:05 2011] ../../acisf08123/products/events/fullrun_ccd2_acisf08123_pi14-548_pass1_cl_src6_src.evt and ../../acisf08123/products/events/fullrun_ccd2_acisf08123_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Fri Oct  7 12:18:05 2011] Size of ../../acisf08123/products/events/fullrun_ccd2_acisf08123_pi14-548_pass1_cl_src6_src.evt.gz[events] = 25 counts
[Fri Oct  7 12:18:05 2011] Mean chipx,y = (318.00, 769.44)
[Fri Oct  7 12:18:05 2011] Mean tdetx,y = (3830.44, 3768.00)
[Fri Oct  7 12:18:05 2011] chipx,y range = (304.00-342.00, 753.00-787.00)
[Fri Oct  7 12:18:05 2011] Size of ../../acisf08123/products/events/fullrun_ccd2_acisf08123_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 32 counts
[Fri Oct  7 12:18:05 2011] ../../acisf08123/products/images/fullrun_ccd2_acisf08123_pi14-548_pass1_cl_src6_src.img and ../../acisf08123/products/images/fullrun_ccd2_acisf08123_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Fri Oct  7 12:18:05 2011] ../../acisf08123/products/spectra/fullrun_ccd2_acisf08123_pi14-548_pass1_cl_src6_src.pi and ../../acisf08123/products/spectra/fullrun_ccd2_acisf08123_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Fri Oct  7 12:18:05 2011] Not generating rmf since there are only 23 counts
[Fri Oct  7 12:18:10 2011] ../../acisf08123/products/lightcurves/fullrun_ccd2_acisf08123_pi14-548_pass1_cl_src6_src.lc and ../../acisf08123/products/lightcurves/fullrun_ccd2_acisf08123_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Fri Oct  7 12:19:31 2011] 192.244
[Fri Oct  7 12:22:08 2011] Updating aperture counts using extracted products
[Fri Oct  7 12:22:08 2011] Error reading totcts from fullrun_ccd2_acisf08123_pi14-548_pass1_cl_src6_src.pi.gz
[Fri Oct  7 12:22:08 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 12:22:08 2011] Using photon index=1.80, rate=0.000475, arf fullrun_ccd2_acisf08123_pi14-548_pass1_cl_src6.arf
[Fri Oct  7 12:22:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 12:22:08 2011] Updating source flux to 5.7e-15
[Fri Oct  7 12:22:23 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct  7 12:22:24 2011] acisf08123/analysis//spectral/fullrun_ccd2_acisf08123_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete