[Mon Oct 17 00:29:41 2011] Detection parameters:
  Position = (571.8, 520.0) = 12 47 7.22 12 4 12.1
  Extent = 1.8" x 1.1", rotation angle = 147 degrees
  Source counts = 14.1 +/- 3.9
  Background counts = 0.9
  Rate = 0.003 +/- 0.0008

[Mon Oct 17 00:29:41 2011] Off-axis axis estimate = 6.45'
[Mon Oct 17 00:30:13 2011] Using EEF radius (= 1.87 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 00:30:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 00:30:13 2011] Initial guess for spatial extent in simple fitting = 1.87"
[Mon Oct 17 00:30:13 2011] source mask rpix=3.8, npix_max = 73, mask sum = 64, frac = 0.868
[Mon Oct 17 00:30:13 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.87"
[Mon Oct 17 00:30:14 2011] fullrun_ccd6_acisf08101_pi14-548_cl_pass0_src2.ximg exists
[Mon Oct 17 00:30:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf08101_pi14-548_cl_pass0_src2.csv
[Mon Oct 17 00:30:14 2011] fullrun_ccd6_acisf08101_pi14-548_cl_pass0_src2_1.ximg exists
[Mon Oct 17 00:30:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf08101_pi14-548_cl_pass0_src2.csv
[Mon Oct 17 00:30:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf08101_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf08101_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 00:30:14 2011] fullrun_ccd6_acisf08101_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Mon Oct 17 00:30:14 2011] fullrun_ccd6_acisf08101_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Oct 17 00:30:14 2011] Fit fullrun_ccd6_acisf08101_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Oct 17 00:30:16 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 22.026554 pixels away
[Mon Oct 17 00:30:16 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 00:30:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 00:30:16 2011] Assessing source extent using major
[Mon Oct 17 00:30:16 2011] Source does appear to be extended
[Mon Oct 17 00:30:16 2011] Computing asymmetry using major and minor axis, asym = 1.66
[Mon Oct 17 00:30:16 2011] Source is asymmetric
[Mon Oct 17 00:30:32 2011] Using EEF radius (= 1.87 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 00:30:32 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 00:30:32 2011] Initial guess for spatial extent in simple fitting = 1.87"
[Mon Oct 17 00:30:32 2011] source mask rpix=3.8, npix_max = 73, mask sum = 64, frac = 0.868
[Mon Oct 17 00:30:32 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 1.87"
[Mon Oct 17 00:30:32 2011] fullrun_ccd6_acisf08101_pi14-548_cl_pass1_src2.ximg exists
[Mon Oct 17 00:30:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf08101_pi14-548_cl_pass1_src2.csv
[Mon Oct 17 00:30:32 2011] fullrun_ccd6_acisf08101_pi14-548_cl_pass1_src2_1.ximg exists
[Mon Oct 17 00:30:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf08101_pi14-548_cl_pass1_src2.csv
[Mon Oct 17 00:30:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf08101_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf08101_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 00:30:32 2011] fullrun_ccd6_acisf08101_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Mon Oct 17 00:30:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf08101_pi14-548_cl_pass1_tfrozen_src2.csv
[Mon Oct 17 00:30:32 2011] fullrun_ccd6_acisf08101_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Oct 17 00:30:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf08101_pi14-548_cl_pass1_tfrozen_src2.csv
[Mon Oct 17 00:30:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf08101_pi14-548_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf08101_pi14-548_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 00:30:34 2011] Spatial fit model total counts = 14.957700, observed total counts = 16.000000
[Mon Oct 17 00:30:34 2011] Offset between fit and detection position for source 1 = 2.366896 pixels
[Mon Oct 17 00:30:34 2011] 14.788500 total counts/ 0.000000 bgd. counts: snr = 519423862652426.062500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.366896 pixels
  Position = (574.1, 519.4) = 12 47 7.16 12 4 11.6
  Extent = 1.7 (1.2-2.4)", rotation angle = 0
  Source counts = 14.8 +/- 3.8
  Background counts = 0.0
  Rate = 0.003 +/- 0.0008
[Mon Oct 17 00:30:34 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 00:30:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 00:30:34 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 00:30:34 2011] Source does appear to be extended
[Mon Oct 17 00:30:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 00:30:55 2011] Not overwriting source region fullrun_ccd6_acisf08101_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 17 00:30:55 2011] Extracting stamp from image fullrun_ccd6_acisf08101_pi14-548_cl_sm2.00.img.gz, (498, 443) - (650, 596)
[Mon Oct 17 00:30:55 2011] Writing fullrun_ccd6_acisf08101_pi14-548_pass1_cl_src1.gif
[Mon Oct 17 00:30:59 2011] ../../acisf08101/products/events/fullrun_ccd6_acisf08101_pi14-548_pass1_cl_src1_src.evt and ../../acisf08101/products/events/fullrun_ccd6_acisf08101_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 17 00:30:59 2011] Size of ../../acisf08101/products/events/fullrun_ccd6_acisf08101_pi14-548_pass1_cl_src1_src.evt.gz[events] = 15 counts
[Mon Oct 17 00:30:59 2011] Mean chipx,y = (479.73, 291.67)
[Mon Oct 17 00:30:59 2011] Mean tdetx,y = (3354.73, 1993.67)
[Mon Oct 17 00:30:59 2011] chipx,y range = (457.00-503.00, 274.00-313.00)
[Mon Oct 17 00:30:59 2011] Size of ../../acisf08101/products/events/fullrun_ccd6_acisf08101_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 9 counts
[Mon Oct 17 00:30:59 2011] ../../acisf08101/products/images/fullrun_ccd6_acisf08101_pi14-548_pass1_cl_src1_src.img and ../../acisf08101/products/images/fullrun_ccd6_acisf08101_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 17 00:30:59 2011] ../../acisf08101/products/spectra/fullrun_ccd6_acisf08101_pi14-548_pass1_cl_src1_src.pi and ../../acisf08101/products/spectra/fullrun_ccd6_acisf08101_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct 17 00:30:59 2011] Not generating rmf since there are only 14 counts
[Mon Oct 17 00:31:02 2011] ../../acisf08101/products/lightcurves/fullrun_ccd6_acisf08101_pi14-548_pass1_cl_src1_src.lc and ../../acisf08101/products/lightcurves/fullrun_ccd6_acisf08101_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 17 00:31:09 2011] 190.918
[Mon Oct 17 00:31:24 2011] Updating aperture counts using extracted products
[Mon Oct 17 00:31:24 2011] Error reading totcts from fullrun_ccd6_acisf08101_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct 17 00:31:24 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 00:31:24 2011] Using photon index=1.80, rate=0.00291, arf fullrun_ccd6_acisf08101_pi14-548_pass1_cl_src1.arf
[Mon Oct 17 00:31:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 00:31:24 2011] Updating source flux to 3.3e-14
[Mon Oct 17 00:31:28 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 17 00:31:29 2011] acisf08101/analysis//spectral/fullrun_ccd6_acisf08101_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete