[Wed Sep 21 12:09:48 2011] Detection parameters:
  Position = (572.5, 314.7) = 9 58 57.22 1 58 43.0
  Extent = 1.0" x 0.6", rotation angle = 89 degrees
  Source counts = 52.1 +/- 7.4
  Background counts = 2.9
  Rate = 0.001 +/- 0.0002

[Wed Sep 21 12:09:55 2011] Off-axis axis estimate = 5.07'
[Wed Sep 21 12:11:49 2011] Using EEF radius (= 1.21 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 12:11:49 2011] Initial guess for spatial extent in simple fitting = 1.21"
[Wed Sep 21 12:11:49 2011] source mask rpix=2.5, npix_max = 34, mask sum = 30, frac = 0.858
[Wed Sep 21 12:11:49 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 1.21"
[Wed Sep 21 12:11:50 2011] fullrun_ccd3_acisf08027_pi14-548_cl_pass0_src7.ximg exists
[Wed Sep 21 12:11:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08027_pi14-548_cl_pass0_src7.csv
[Wed Sep 21 12:11:50 2011] fullrun_ccd3_acisf08027_pi14-548_cl_pass0_src7_1.ximg exists
[Wed Sep 21 12:11:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08027_pi14-548_cl_pass0_src7.csv
[Wed Sep 21 12:11:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08027_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08027_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 12:11:50 2011] fullrun_ccd3_acisf08027_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Wed Sep 21 12:11:50 2011] fullrun_ccd3_acisf08027_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Sep 21 12:11:50 2011] Fit fullrun_ccd3_acisf08027_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Sep 21 12:12:14 2011] Spatial fit model total counts = 55.400200, observed total counts = 58.000000
[Wed Sep 21 12:12:14 2011] Offset between fit and detection position for source 5 = 1.079541 pixels
[Wed Sep 21 12:12:14 2011] 56.314700 total counts/ 9.236300 bgd. counts: snr = 15.490758
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.079541 pixels
  Position = (572.9, 315.7) = 9 58 57.22 1 58 43.2
  Extent = 1.0 (0.7-1.2)", rotation angle = 0
  Source counts = 47.1 +/- 7.5
  Background counts = 9.2
  Rate = 0.001 +/- 0.0002
[Wed Sep 21 12:12:14 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 12:12:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 12:12:14 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 12:12:14 2011] Source does appear to be extended
[Wed Sep 21 12:12:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 12:13:44 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 12:13:44 2011] Initial guess for spatial extent in simple fitting = 0.96"
[Wed Sep 21 12:13:44 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.036
[Wed Sep 21 12:13:44 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 0.96"
[Wed Sep 21 12:13:45 2011] fullrun_ccd3_acisf08027_pi14-548_cl_pass1_src7.ximg exists
[Wed Sep 21 12:13:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08027_pi14-548_cl_pass1_src7.csv
[Wed Sep 21 12:13:45 2011] fullrun_ccd3_acisf08027_pi14-548_cl_pass1_src7_1.ximg exists
[Wed Sep 21 12:13:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08027_pi14-548_cl_pass1_src7.csv
[Wed Sep 21 12:13:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08027_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08027_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 12:13:48 2011] fullrun_ccd3_acisf08027_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Wed Sep 21 12:13:48 2011] fullrun_ccd3_acisf08027_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Sep 21 12:13:48 2011] Fit fullrun_ccd3_acisf08027_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Sep 21 12:14:15 2011] Spatial fit model total counts = 57.702900, observed total counts = 58.000000
[Wed Sep 21 12:14:15 2011] Offset between fit and detection position for source 5 = 0.124411 pixels
[Wed Sep 21 12:14:15 2011] 58.378110 total counts/ 8.946510 bgd. counts: snr = 16.526384
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.124411 pixels
  Position = (573.0, 315.6) = 9 58 57.22 1 58 43.2
  Extent = 1.0 (0.8-1.4)", rotation angle = 0
  Source counts = 49.4 +/- 7.6
  Background counts = 8.9
  Rate = 0.001 +/- 0.0002
[Wed Sep 21 12:14:15 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 12:14:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 12:14:15 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 12:14:15 2011] Source does appear to be extended
[Wed Sep 21 12:14:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 12:19:51 2011] Not overwriting source region fullrun_ccd3_acisf08027_pi14-548_pass1_cl_src5_src.reg
[Wed Sep 21 12:19:51 2011] Extracting stamp from image fullrun_ccd3_acisf08027_pi14-548_cl_sm2.00.img.gz, (528, 270) - (618, 361)
[Wed Sep 21 12:19:51 2011] Writing fullrun_ccd3_acisf08027_pi14-548_pass1_cl_src5.gif
[Wed Sep 21 12:20:13 2011] ../../acisf08027/products/events/fullrun_ccd3_acisf08027_pi14-548_pass1_cl_src5_src.evt and ../../acisf08027/products/events/fullrun_ccd3_acisf08027_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Wed Sep 21 12:20:13 2011] Size of ../../acisf08027/products/events/fullrun_ccd3_acisf08027_pi14-548_pass1_cl_src5_src.evt.gz[events] = 58 counts
[Wed Sep 21 12:20:13 2011] Mean chipx,y = (379.31, 801.60)
[Wed Sep 21 12:20:13 2011] Mean tdetx,y = (4330.40, 3440.31)
[Wed Sep 21 12:20:13 2011] chipx,y range = (355.00-397.00, 780.00-823.00)
[Wed Sep 21 12:20:13 2011] Size of ../../acisf08027/products/events/fullrun_ccd3_acisf08027_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 48 counts
[Wed Sep 21 12:20:13 2011] ../../acisf08027/products/images/fullrun_ccd3_acisf08027_pi14-548_pass1_cl_src5_src.img and ../../acisf08027/products/images/fullrun_ccd3_acisf08027_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Wed Sep 21 12:20:13 2011] ../../acisf08027/products/spectra/fullrun_ccd3_acisf08027_pi14-548_pass1_cl_src5_src.pi and ../../acisf08027/products/spectra/fullrun_ccd3_acisf08027_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Wed Sep 21 12:20:13 2011] Not generating rmf since there are only 49 counts
[Wed Sep 21 12:20:16 2011] ../../acisf08027/products/lightcurves/fullrun_ccd3_acisf08027_pi14-548_pass1_cl_src5_src.lc and ../../acisf08027/products/lightcurves/fullrun_ccd3_acisf08027_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Wed Sep 21 12:21:36 2011] 181.777
[Wed Sep 21 12:21:51 2011] Updating aperture counts using extracted products
[Wed Sep 21 12:21:51 2011] Error reading totcts from fullrun_ccd3_acisf08027_pi14-548_pass1_cl_src5_src.pi.gz
[Wed Sep 21 12:21:52 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 12:21:52 2011] Using photon index=1.80, rate=0.001, arf fullrun_ccd3_acisf08027_pi14-548_pass1_cl_src5.arf
[Wed Sep 21 12:21:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 12:21:52 2011] Updating source flux to 1.3e-14
[Wed Sep 21 12:22:01 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting